ReviewsMotor Potentiometer

DZS Elec 10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator Governor Switch CCMHCN With Speed Control Knob

• Type: DC 10A 12V-40V motor speed controller, high efficiency, high torque, low heat radiation..
• Function: With power supply reverse polarity protection, over-voltage protection, 10A standard fuse over-load protection, more safer and reliable..
• PWM Duty Cycle: 10%-100%, Control Power: 0.01-400W, adopting variable speed knob potentiometer to control motor speed..
• Rated Current: 8A, Max Current: 10A, Quiescent Current: 0.02A (Standby).
• Applications: Suitable for DC motor speed control, PLC speed control etc..

TWTADE / 3pcs Wh138 100k ohm Potentiometer Single Turn Rotary Linear Variable Potentiometer +3pcs black Aluminum alloy knob

• Potentiometer Body Size : 24 x 10mm / 0. 9″ x 0. 39″(D * H).
• Potentiometer Total Height : 26mm/1. 02″.
• Rotary Knob Size : 17 x 21mm/0. 67″ x0.83″(H*Max. D).
• Rated Power: Linear taper B: 0.5W, Other Tapers: 0.25W.
• Rotational life of the Potentiometer: 10000 Cycles, Rotational life for joystick: 100000 Cycles Min..
• Package Content : 3 Pcs x Switch Carbon Potentiometer + 3 Pcs x black Aluminum alloy knob.

YYQTGG Miniature Vibration Motor, Coreless Vibration Motor Sturdy Low Noise Professional for Beauty Instrument

• ...h-precision rotor is made of high-tech components, with a glossy surface, waterproof and high efficiency. Get ready to let the race dust settle..
• Speed Controller Included: This dc electric motor brushless is equipped with a controller, which can provide speed control within the ideal range. Speed adjustment method: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..
• Wide Application: The brushless motor is superior to the brushed motor because of its high efficiency, energy saving, low noise, long lifespan, and stable operation. It is applicable to go karts, scooters, e-bikes, ATVs, motorized bikes, mopeds, mini bikes, pocket bikes, etc. Get up to speed with a brushless motor..

DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch & Knob

• Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W..
• Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
• Speed Control: our motor control board can regulate motor speed by potentiometer.
• what's more, it support clockwise/anticlock-wise rotation adjustment..
• Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative.
• thick blue wire for the motor positive, and the thick green for the motor negative..
• PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient..

Molence 5PCS RV24YN20S 10K ohm Single Turn Carbon Film Rotary Potentiometer with Knob Dials for Motor Speed Control (B103 10K ohm)

• Potentiometer Body Size : 24 x 10mm / 0. 9" x 0. 39"(D * H).
• Potentiometer Total Height : 26mm/1. 02".
• Rotary Knob Size : 17 x 21mm/0. 67" x0.83"(H*Max. D).
• Rated Power: Linear taper B: 0.5W, Other Tapers: 0.25W.
• Rotational life of the Potentiometer: 10000 Cycles, Rotational life for joystick: 100000 Cycles Min..
• Package Content : 3 x Switch Carbon Potentiometer + 3 x black Aluminum alloy knob.

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

• This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
• SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
• support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
• Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
• Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
• We are the original factory,any technical issues do not hesitate to contact us.

7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

• ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
• ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
• ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
• ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
• ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..

BOJACK 12 Values 60 pcs Variable Resistor 100 to 500K ohm 3296W Multiturn Trimmer Potentiometer Assortment Kit

• resistance Tolerance : +/-10 percent shaft Size : 6 x 10mm/ 0. 24" x 0. 4"(D*l).
• Potentiometer Body Size : 24 x 14mm / 0. 9" x 0. 55"(D * H).
• Screw Thread Dia. : 9mm / 0. 35" Shaft Diameter : 6mm / 0. 24".
• Rotary Knob Size : 15 x 27mm/0. 6" x 1. 1"(H*Max. D).
• Total Size : 40 x 38mm/1. 6" x 1. 5"(Dial d*h).
• package content : 2 x Potentiometer + 2 x A03 knob + 2 x dials.

TWTADE / 3pcs wh138 100 ohm Potentiometer Single Turn Rotary Linear Variable Potentiometer +3pcs black Aluminum alloy knob

PWM DC Motor Speed Controller, DC10-55V/40A Max 60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display,Continuous Current 40A

• 【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
• 【Easy to Operate】The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. And with LED display is accurate to show 0 ~ 100% of the motor speed. The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt.Do not reverse the positive and negative poles！.
• 【Application】 The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

• Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
• High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
• Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
• Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
• Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
• production line conveyor belt speed regulation.