ReviewsMotorcycle Damper Rubber

RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct

  • Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel.
  • Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
  • FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..
Check Stock

Progressive Suspension 412-4036B Black 12\ Standard Replacement Rear Suspension Shock

  • Steel double wall damper with multistage velocity sensitive damping.
  • High pressure gas charged for consistent damping performance.
  • Standard progressive rate spring in black finish.
  • The 412 Series proven, durable design means they will be an improvement to your motorcycle's suspension performance.
Check Stock

Progressive Suspension 412-4003B Black 13.5\ Heavy Duty Replacement Rear Suspension Shock

  • Steel double wall damper with multistage velocity sensitive damping.
  • High pressure gas charged for consistent damping performance.
  • Heavy duty progressive rate spring in black finish.
  • The 412 Series proven, durable design means they will be an improvement to your motorcycle's suspension performance.
Check Stock

3/4\ Bore 12 Tooth 12T Clutch & #35 Chain for Predator 212cc 6.5HP Small Engine

  • Replacement for: 2004-2007 Yamaha Rhino 660 YXR660.
  • Part Number: 5UG-21485-00-00, 5UG-21486-00-00.
  • Made of high quality material, it can withstand all kinds of temperature environment, corrosion resistance, high pressure resistance, in the case of severe vibration to maintain good performance, strong and durable, the surface after anti-rust treatment, the bottom pad adopts anti-skid design, long service life, to meet the shock absorption, sealing, noise reduction requirements.
  • Include: 2 X bottom mount rubber damper, 2 X top mount rubber damper, 4 X nut, 4 X mounting bolt, accessories are available, only need to be replaced, no modification.
  • Please confirm the part number and model before purchase. If you are not sure whether they match, please contact us, and we will give you a timely reply.
Check Stock

Senyar 12.5 x 2.75in Motorcycle Tire,Rubber Motorcycle Front Rear Tire Wheel with Rim Rear Wheel Hub Tires Mini Off-road Vehicle QG-50 Delivery with gas

  • High rubber and butyl rubber Material --- The Motorcycle Tire is made from a mixture of natural rubber and butyl rubber, antiwear, elastic and durable.That delivers excellent balance of mileage and grip..
  • Rust Resistant --- The Motorcycle Tire has high quality aluminum alloy wheel rim, corrosion and rust resistant, which has long service life..
  • Non-slip Design --- The outer tire is engraved with delicate grooves, non-slip design, ensuring your driving safety.The tread patte designed for outstanding water evacuation and wet grip..
  • Easy Installation --- The Mini Off-road Vehicle Tire has simple installation, no complicated tools required, convenient to us....
Check Stock

Progressive Suspension 412-4230C Chrome 11.5\ Heavy Duty Low Buck Factory Replacement Rear Suspension Shock

  • Durable design means they will be an improvement to your motorcycle's suspension performance.
  • All steel double wall damper with multistage velocity sensitive damping.
  • High pressure gas charged for consistent damping performance.
Check Stock

Progressive Suspension 412-4061B Black Anodized Finish 13″ Heavy Duty Low Buck Factory Replacement Rear Suspension Shock

  • Durable design means they will be an improvement to your motorcycle’s suspension performance.
  • All steel double wall damper with multistage velocity sensitive damping.
  • High pressure gas charged for consistent damping performance.
Check Stock

Char-Griller 06620 Akorn Kamado Kooker Charcoal Barbecue Grill and Smoker Red

  • Triple-walled steel construction makes this grill fuel-efficient | Large 8" Locking Caster Wheels | Features Locking Lid, 2 folding black metal....
  • Product dimensions | 45” L x 31” W x 47” H | Weight – 97 lbs. | Temperature range – 200ᵒ F to 700ᵒ F | Total cook area – 447 Sq. In. |....
  • Insulated design means more heat uses less charcoal and less airflow means insulated heat for juicy meat.
  • Cooking surface is cast iron, Body is constructed of 22 gauge steel, Exterior finish is powder coated steel, Interior finish is porcelain coated steel.
  • Cart is constructed of tubular steel w/rubber wheels, locking caster on front, Indexed damper is numbered so you can note the position of the damper.
Check Stock

Duct Reducter 8 to 6 Air Ducting Reducer Increaser Air Duct Adapter or Round Metal Pipe Reducer for Bathroom Kitchen Ventilation Systems

  • An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications..
  • Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts..
  • Mounts horizontally or vertically to prevent backflow and debris from entering ducting..
  • Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow..
  • Fit for 6 in. Duct Openings | Product Length: 5.03 inches | Finish: Powder Coat.
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

AC Infinity 6\ Backdraft Damper, One-Way Airflow Ducting Insert with Spring-Loaded Folding Blades for 6” Ducting in Range Hoods and Bathrooms Fans

  • An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications..
  • Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts..
  • Mounts horizontally or vertically to prevent backflow and debris from entering ducting..
  • Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow..
  • Fit for 6 in. Duct Openings | Product Length: 5.03 inches | Finish: Powder Coat.
Check Stock