ReviewsMotorcycle Sprocket Kit

212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

...erter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
1 x 10 Tooth Sprocket for #40/41/420 Chain.
1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
1 x Full Mounting Hardware. Note This is not made by Comet.

Check Stock

Caltric Black Drive Chain And Sprocket Kit Compatible with Kawasaki Ninja 300 Ex300 Abs 2013-2017

Chain Kit parts packaged with drive chain, engine sprocket, rear sprocket and the other replacement parts (Engine Sprocket Washer, Rear Sprocket Nuts and Cotter Pin etc.).
This complete package from Kawasaki contains all the qualified genuine parts required for correct drive chain replacement for each model.
Please note that Kawasaki cannot assume any responsibility for damage resulting from incorrect installation.

Check Stock

Gear and Sprocket Kit 041C4220A Replacement for Liftmaster Chamberlain Sears Craftsman Garage Opener Parts,Include Helical Gear,Worm Gear,Wear Bushings,Grease etc Chain Drive Gear Hardware Part

Complete kit includes: Helical gear and top hat assembly, worm gear, wear bushings, grease, and hardware needed to replace the chain drive gears..
Our Chain Drive Gear and Sprocket Kit is a complete chain drive gear and sprocket replacement kit. This gear and sprocket assembly is compatible with various chain drive garage door openers.
Replacement parts for chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models..

Check Stock

COLIBROX Sprocket kit Remington Elect Chainsaw and Polesaws

Sprocket Kit includes 107713-01 (075752) sprocket, 059606 gear, 075676 bearing.
075752 Sprocket specs: 59 internal tooth.

Check Stock

Garage-Pro Aftermarket Timing Chain Kit Compatible with 1995-2004 Toyota Tacoma 16 Valves DOHC 3RZFE Eng.

Direct Replacement Timing Chain Kit Compatible with 1995-2004 Toyota Tacoma.
Direct Replacement Timing Chain Kit Compatible with 1996-2000 Toyota 4Runner and 1994-1998 Toyota T100.
Garage-Pro JCWREPT300103GP Features: Kit, With Sprocket (Gear), (1) Timing Chain, (1) Balance Shaft Chain, (1) Camshaft Sprocket, (1) Crankshaft....
Timing Chain Kit Interchangeable With: TK939, 94196S.
A high quality, Direct Fit OE Replacement Timing Chain Kit, with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items purchased thru....

Check Stock

CDHPOWER 29'/700C Black Aluminum Mag Wheels - 66cc/80CC Gas Motorized Bicycle

Please note£ºexcluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles.
do not need adapter, sprocket only needed.
put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding£»inner diameter of rim:17.5mm/0.689inch.
Aluminum Wheels Excluding chain drive Sprocket£»Thread size: 1.375 inch X24T.
the hole spacing for front and rear wheel both 44mm, please see the last picture£»NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
Size for Wheel Axle: LxT(front axle): 160mm x 10mm.
light and very durable. 29"/700c Size Wheel.
the hole spacing for front disc brakes of mag wheel to be added is 44mm.
PLEASE NOTE 1: the best safe speed if racing: 35km/h£»Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDH alum wheel.

Check Stock

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley.

Check Stock

Electric Brushless DC Motor Complete Kit, 48V 2000W 4300RPM High Speed Motor, With 33A 15 Mosfet Controller, Battery Display LCD Throttle, Electric Scooter Bicycle Motorcycle Mid Drive Motor, DIY Part

Kunray MY1020 Brushless Motor Features: Electric Brushless DC Motor, Aluminum Body, Full Copper Coil, Heat Resistant, Naturally Air Cooled, Low Noise High Quality More Long Life..
Motor Type: Brushless DC High Speed Motor, Voltage 48V, Power 2000W Max, Current 42A, Rated Speed 4300rpm/min, With T8F 11Teeth Sprocket Chainwheel..
About Controller: 48V 2000W 15 Mosfet 33A Brushless Motor Speed Controller, With Hall Sensor, E-Brake, 3Speed (Low Mid High Speed）, Reverse, Indicator Light And Power Lock Functions..
LCD Handlear Twist: 48V Lithium Battery LCD Screen Handlebar Throttle Twist Grips, With Battery Indicator, Ignition Lock, Twist Throttle Accelerator 3 in 1 Function Handlebar Grip, With High Quality Rubber Grips, More Comfortable..
Application For: Electric Scooter, Motorcycle, Ebike Bicycle, Go Karts, E-bike, Motorcycle, E Tricycle,Mid Drive Motor Kit, Complete Set,DIY Engine System, Cycling Part,And More.What You gGet: 1pcs Motor, 1pcs Controler, 1pair Throttle, And Manual..

Check Stock

DDBESSIC 100cc Bicycle Motor Kit, 2-Stroke Gas Motor Bike Kit Conversion CDI Upgraded Motorized Bike Kit for Most 26" 28" V Frame Bikes Bicycle Scooter

【44 Tooth Bike Motor Kit】The 100CC bicycle motor kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle, including engine, fuel tank, silencer, etc..
【Upgrades Bike Motor Kit】Come with a complete engine kit, 2-stroke 100cc single cylinder gasoline engine, CDI Assembly,Fuel Tank (with Valve),Carburetor Assembly,Exhaust Muffler,Clutch handle, Left Handle Grip,Twist-grip Throttle with Kill Switch,Clutch Cable,Throttle Cable,Chain,Sprocket,Chain Idler Pulley,Chain Guard,Mounting tools.
【Low Fuel Consumption】100cc gas motor bicycle kit. Perfect for upgrading from a regular bike to an electric bike, you can enjoy a faster ride. Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Max.Load capacity:180kg（396lb）,Top Speed: 48km/h（30 mi/h).
【High Performance Carburetor】Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle , Idle RPM Screw, Idle Air Screw delivers more fuel with the choke on, instead of restricting air. Great for cold weather starts!.

Check Stock

49CC 4-Stroke Gas Petrol Motorized Bike DIY Engine Motor Kit Scooter with Chain Drive Bicycle Scooter Conversion Kit US Stock (without belt)

●The tank holds 2 litres of petrol and everything comes with the kit.
●49cc 4 stroke pull start petrol conversion kit for adult bicycles, ideal for bikes with 26 inch frames and similar Long term spares available as required..
●4 stroke engines are more stable, more reliable and Quieter than the 2 stroke rivals.The top speed of between 27 - 32 MPH / or 43 - 51 KPH..
●Pakage include:1 x Quality 49cc 4 stroke engine.
1 x Gas tank,Plastic gasoline fuel line,fuel value.
1 x Fiber sprocket mounting rings, 9 sprocket bolts, 3 metal retaining segments.
1 x Engine Mounting plate with universal mounting brackets.
1 x Twist grip throttle with built-in kill switch.
●Reliable quality:Worry-free 36-Month.If you have any question about the product ,we support 24*7 hours prompt customer service.

Check Stock

FHelectronic 25H 68T 68 Tooth Rear Sprocket + Chains fit for 49CC Mini Small Sports Car Pocket Bike 2 Stroke Off-Road Motorcycle Chain Pinion Chain Drive Gear

Brand New Motorcycle Heavy Duty Chain & Sprocket Kit,Made From the Metal Quality Materials Available..
Chain repeated forging, strict control of materials to ensure the strength,easy to disassemble, easy to clean, reusable..
Their advanced tooth profile, concentricity and accuracy of fit provide maximum power transfer and long-life..
Combination of a very high strength base material and an exceptionally hardwearing surface result in significantly increased chainwheel life..
Please Check the Picture and Size Before You Buy..

Check Stock