ReviewsMotorized Drywall Lifter

Drywall Tools Carrier, Plywood Panel Plasterboard Glass Board Handle Carry Load Lifter

• ABS engineering plastic, anti-decoupling design to prevent goods falling down, ensure safe operation, TRA non-sliding material handle..
• Excellent way to carry drywall, plywood, or solar panels,Reduces back strain, improves safety, and speeds up walking with a panel..
• Size: 14.4" L ×6.5" W,Handle width 5.1" ，Base Plate width 2.6"..
• The Thickened & Multi-frame Base Plate, With Great Load Bearing Approx 176 lbs..
• Just hook the panel lifter around the bottom of the sheet at the center point, tip the sheet up and lift, leaving your lifting arm fully extended as if you were carrying a suitcase,Use your other arm to balance the sheet, keeping the drywall close to horizontal..

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

• HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
• GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
• SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
• EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
• SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....

Goldblatt G15149 Drywall Roll Lifter

FivePears Panel and Plywood Carrier,Metal Gripper For board,Drywall carrying tool …

• √ 【HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC.】 : Fivepears presents one of the most advantage tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. Use the Fivepears Lift to grip and carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch..
• √ 【GRIP HANDLE FOR ONE-HAND CARRYING】 : This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover..
• √ 【SOLID METAL CONSTRUCTION】: This drywall gripper is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
• √ 【SELF-ADJUSTING GRIPPER CLAMP】: This piece of equipment by Fivepears has a ....

Enpoint Drywall Foot Lift, Alloy Foot Panel Lifter for Drywall Install, Door Lifter Tool for Hinge Installation, Plywood Lifting Tool for Sheetrock Glass Ceramic Tile Plasterboard Plates, Silver

• Labor-Saving Design --- Ergonomic one-foot lever lift, easily & effortlessly lifting drywall, plywood, panels, fiberboard, sheetrock etc. Also can be door lifter tool..
• Anti-slip & Anti-off --- Anti-slip with grip surface & big foot buckle, anti-off with the front edge to limit and balance the panel to prevent slippage/ off hook..
• Reinforced Base --- An widened base with enhanced design to make the drywall lift distribute force even and strengthen bearing supports.
• Alloy Material --- Sturdy aluminum alloy with welded reinforcement for strength and durability for long service span..
• Perfect Size --- Handy and lightweight but heavy duty, easy to transport and store in tool pouch/box..

IMT Panel Carrier Heavy Duty Drywall Hand Clamps Power Gripper Plywood Sheetrock Handy Lifter for Wood/Board/Plastic/Sheet Metal Self-Adjusting from 0-1 1/8 Rate up to 200 Pounds

• ❤️Sales Now: Limited time offer!❤️MAKES YOUR WORK A WHOLE LOT EASIER AND SAFER! — Instead of two guys awkwardly hauling sheets, this panel....
• ❤️WORKS ON A VARIETY OF SHEET MATERIALS: This power gripper board lifter is ideal for heavy sheet goods such as drywall, plywood, metal sheets,....
• ❤️SELF-ADJUSTING TO THICKNESS HANDY CLAMP】It makes the drywood carrier more simple to use. As soon as you start lifting, the clamp automatically....
• ❤️SOLID CONSTRUCTION FOR STRENGTH: The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid....
• ❤️PREMIUM QUALITY WITH EXCELLENT CUSTOMER SERVICE: The glass lifter through the CE, SGS, RoHS, PAHS certification. Your satisfaction is our #1....

Touchstone 23202 – Whisper Lift II TV Lift Mechanism - 36 Inch Travel Less Than 30 Seconds - Popup & Drop Down - for 32 inch to 65 inch TVs/Up to 100 Lbs - Wireless RF Remote - Simple Installation

• STRENGTH AND STABILITY: Touchstone’s Flat Screen Motorized TV Lift can hold and secure televisions that weigh up to 100 lbs, with a lift capacity of 120 lbs. The Whisper Lift II also features a unique mounting mechanism that fastens your flat-screen TV to the quick-connect bracket for guaranteed safety and security..
• HEAVY-DUTY STEEL CONSTRUCTION: Designed by expert mechanical engineers, this lift is constructed from sturdy steel for unmatched strength and stability. The Whisper Lift II is equipped to provide the power and durability you need to mount your television set in a hassle-free way..
• 24V-MOTOR LIFTER: Set up your TV in your favorite home space in almost no time. Touchstone Lift’s whisper-quiet 24V motor can raise a television up to 36 inches within 30 seconds..
• EASY TO INSTALL: The Touchstone Flat Screen Motorized TV Lift is easy to use and install. Each lift comes with a universal hardware kit that includes bolts and machine screws to accommodate most brands and models of flat-screen TVs. This lift can also be mounted to your ceiling or wall, allowing you to mount your flat-screen TV to face downward. No need....

Drywall Lift Panel Hoist 11'' Drywall Lift Drywall Panel Hoist Jack Lifter Jack Rolling Caster Wheel Lockable Drywall Lift Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel

• 【Stable and Safe】Our new upgrade drywall lift uses bolts to replace the original screw, making the lift more stable. When you push the lift to the right place and prepare for commissioning, simply block the wheels with the brake to prevent the machine from slipping to ensure your safety..
• 【Adjustable Angle & Height & Length】This drywall lift can be tilted 60° forward or backward and rotated 360°. The telescopic arm can be adjusted from 46in to 107in, which is perfect for installing sheet metal. And the height can be adjusted from 52in to 107in. ​It is commonly used in flat and inclined ceilings..
• 【150Lbs Load Capacity】This plate lifter is made of premium-performance steel, which ensures it‘s longevity and durability. And it can be attached to flat ceilings, inclined ceilings or side walls with a maximum load of 150lb..
• 【Easy to Lift】Use the drywall lift to replace manual operation, making your work faster and safer. You only need to hold the winch wheel and brake arm firmly, turn the winch to complete the lifting. Give it a try and free your hands!.
• 【Easy to Assemble and Use】This plate lift is easy to assemble and disassemble without tools. Thanks to it's good weight and strength, the plate lift can be folded quickly and ea....

FivePears Panel and Plywood Carrier,Metal Gripper for Board,Drywall Carrying Tool 2 Pack …

• √ 【One-hand carrying】 : Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift.
• √ 【Application】 : Heavy Duty Holder for Carrying Dry Wall,Plywood - the most innovative tools for lifting and carrying all kinds of plywood,....
• √ 【Special feature】: Grip handle for one-hand carrying, this panel/poly wood lifter features a durable , impact-resistant ABS handle that makes....
• √ 【Materials】: The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The....
• √ 【Easy on your back】: carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back....

Texinpress Motorized TV Lift for 32\ to 65\ TVs Large Screen with Remote Control Height Adjustable TV Stand Wall Mount TV Bracket(800mm)

• This TV lift can be used for 32'' - 65'' TVs' screens. Fit most of sizes TVs. Load capacity is 220lbs..
• This TV bracket is made from heavy duty steel and finished in black paint, durable and safe..
• TV height 3-level adjustable to accommodate your different viewing needs, all done with our remote control at a distance..
• This motorized TV lift stand makes TV screen can be lifted or down between 28.7"-68.1" height at the speed of 25mm/s..
• Package includes: 1× RF Remote Controller.

Carlisle Paddles-68681 Bathmaster Deltis Cover, Blue Standard Cover Fits Deltis Bathlift, Comfortable 1/4\ Foam Seat and Backrest Cover Protects Bath Lift, Easy to Use Cover Snaps Into Place, Washable

• Blue Standard Cover compatible with Deltis Bathlift, makes bath and shower seat more comfortable on the legs and back.
• 1/4" foam pads cover the seat and backrest to prevent slipping and make bathing independently more comfortable.
• Easy to use covers quickly snap into place and can be removed for washing and cleaning.
• Extends the life of the Deltis Bath Lifter motorized shower seat for baths and showers.
• Washable at 104º, air dry only to prevent damage.