ReviewsMotorized Pulley

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....

Check Stock

Yuecoom Sliding Window Pulley, Window Pulley Stainless Steel Sliding Window Groove Wheel Furniture Hardware Fittings

Stable Window Pulley: It adopts stainless steel frame, brass double groove pulley, durable, smooth and quiet..
Window Pulley Application: The pulley has little friction, stable and silent, and is suitable for aluminum alloy window..
Durable Window Pulley: It is fixed with stainless steel rivets, wear‑resistant, and can be used for a long time..
Practical Window Pulley: The installation is firm, not easy to loosen, and the bearing capacity is strong, about 45‑80kg..
Convenient Window Pulley: Easy to install and use, flexible push and pull, it is a practical hardware accessory..

Check Stock

GM CLIMBING Pack of 2 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....

Check Stock

Paliston 30kN Climbing Pulley with Ball Bearing for Rock Climbing Arborist

Sturdy and Robust Pulley. Made from aircraft aluminum alloy, this climbing pulley is sturdy enough to trust on..
Ball Bearing Pulley. Mounted with premium ball bearing, the climbing pulley rotates smoothly..
Reliable Pulley. The pulley is rated up to 30kN, also get CE Certification..
The swing side makes it easy to remove or install your rope..
Suitable for rock climbing, hauling system, arborist and many other applications..

Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (1 Pack)

✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 4 pcs 6*40mm self-tapping screws and 4 pcs 10*60mm yellow expansion pipes.).
✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipe....

Check Stock

Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (2 Pack)

✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 8 pcs 6*40mm self-tapping screws and 8 pcs 10*60mm yellow expansion pipes.).
✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipes in the....

Check Stock

Garneck 2pcs Rear Derailleur Pulley Aluminum Alloy Bike Bicycle Bearing Jockey Wheel Rear Derailleur Guide Roller (Purple)

This aluminum alloy rear derailleur pulley will be your great choice for your bike..
It features with strong construction and quality for durable and long-lasting use..
Ensure its practicability in the work of highly performance..
Its easy to use and install with long service life..
rear derailleur pulley derailleur pulley bike derailleur pulley rear derailleur pulley 11t mountain bike derailleur pulley.

Check Stock

NAXEN 20kN Micro Pulley Climbing Pulley Aluminum Pulley Red

Compact Design. Quality pulley designed for mountaineering, rescue, tower work and pulley system..
Compatible with rope up to 1/2" (13 mm)..
Quality Pulley. Made from 7075 aluminum alloy. The surface is anodized with vivid color..
CE Certified Pulley. You can count on it completely..
Versatile. Suitable for rock climbing, rescue, caving, arborist, pulley system and many other applications..

Check Stock

ZOENHOU 4 PCS M50 Loading 881Lbs / 400Kg Single Pulley Block, 304 Stainless Steel Single Pulley Roller with Rotatable 360°Pulley and Rings, Heavy Duty and Smooth Rope Pulley Block for Rope Lifting

SOLID & DURABLE - The single pulley block is made of high quality 304 stainless steel. It has a beautiful appearance. The single pulley adopts solid in design, very sturdy and durable, anti-rust, wear-resistance, and corrosion-resistant..
ROTATABLE 360° & SMOOTH - The silver pulley roller with rotatable 360° pulley and rings. It can prevent ropes, cables, wires from knotting, the pulley is smooth and is easy to use. The rope, climbing buckle, or maintenance hook can be easily passed through the top ring..
EASY TO USE & WIDELY USAGE - These rope pulleys will work very well for suspending antennas from trees and easy to adjust. You can also use them to hoist a metal pail full of stuff up and down, to raise and lower the bird feeder so much safer than getting on a ladder. They are smooth and don't get stuck..
HOW TO MAINTAIN - The rope pulley block is well made and very sturdy. It could easily accommodate many different diametral lines. To increase the more smoothness you can add some lubricant to the single pulley roller after using..
PACKAGE INCLUDE & PRODUCT SIZE - The package comes with 4 M50 single pulley blocks, the height of the small pulley is 2 inch (50.8mm) and the width 0.53inch (13.5mm). The inner width of the ring is 0.77 inch (19.5mm). The c....

Check Stock