ReviewsMounting Bushing

Hydraker Lawn Mower & Mount Plate Fit for EZ-Ride Sulky and Sulky/Velke New

Hitch & mounting plate Fit for a EZ-Ride Sulky and Sulky/Velke units..
Bolts to walk behind commercial mowers (bolts not included)..
Hitch mounting holes are 4" on center. From bushing to bushing is 2-5/8''..
Mower hitch features solid steel construction.Black and gray hammer powder coated paint finish for long lasting corrosion resistance..

Check Stock

Attwood Wedge 2 Inch Extension Post (13-Inch)

Sturdy, dependable mounting point for a boat seat.
Wedge bushing locks the post into the base with a tight, solid fit.
Bushing is securely mounted to the post with 2-point stainless steel riveting.

Check Stock

Kluson Revolution G Style 3x3 Tuning Keys, Plastic Buttons

Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801C.
Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..

Check Stock

Kluson Revolution 3X3 Locking Tuners, Keystone Buttons - NICKEL

Kluson Revolution 19:1 'Gibson' mount Locking tuners in Nickel with Pearloid Keystone buttons, Vintage style KEDPL-3801N.
Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid keystone button and pin-stripes pay tribute to Kluson heritage while adding a rear knob locking.
SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..

Check Stock

Tuner - Kluson, Revolution G Mount, Pearloid Button, 3/side, Color: Nickel

Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801N.
Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..

Check Stock

E-cowlboy T-0220-700R4 Bushing Seal Installer Remover Tool Kit Driver Kit/Tool for GM 700-R4 4L60 4L60E 4L65E Transmission (13pc)

COMPATIBILITY -- This 13 piece bushing driver kit is design to help PROPERLY rebuild for the 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions..
SUPERIOR QUALITY – Made of high quality solid steel and manufactured to meet the OEM specifications and performance, resisting rust and corrsion, ensures an unparalleled long lifespan..
EXCELLENT DESIGN -- Comparable to Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. Bushing driver handle included mounting board easily mounts to wall for easy access!.
KIT CONTENT -- Includes 12 Bushing Drivers (#61-71) and one Driver Handle, which are all placed in a black blow mold case (13-in-1) for easy storage and transportation. With this case, job would be done quickly..
100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Bushing Driver Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..

Check Stock

12 pcs Compatible Masimo Disposable Neonatal Adult Spo2 Sensor for Masimo LNCS Neo 1862 Probe Adhesive Tape Sensor 9 Pins 3.2 ft Connector-Pronto-7, Rad-5, Rad-57, Rad-8, Rad-87, Radical-7

Height: 11.6mm / 0.46" Mounting Dia: 30mm / 1.18".
Package Content: 30 Pcsx Cable Snap Bushing.
Suitable for Plate Thickness:0.8mm-3.2mm.
Fingertip pressure snap-locks into its mounting hole..
Absorbs vibration and insulates cables, tubing, or shafts with limiting internal clearance..
Widely used in electrified railway and power grid wire insulation protection, cable snap bushing insulated protection reliable..

Check Stock

Martin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Check Stock

Martin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
Split through flange and taper to provide strong clamping on the shaft.
Sintered steel for greater strength and resistance to wear than steel.
Keyed to the shaft to prevent the shaft from rotating in the bushing.
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.

Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Nickel KEDPNCL3-N

Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Nickel KEDPNCL3-N.
For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..

Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Gold KEDPNCL3-G

Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Gold KEDPNCL3-G.
For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..

Check Stock