ReviewsMounting Spacers

Architectural Mailboxes 7516B-10 Pacifica In-Ground Steel Mailbox Post, One Size, Black

  • Post is a 3 in. diameter round galvanized steel tube that provides for in-ground mounting.
  • Continuous one piece post for added strength.
  • Constructed of galvanized steel and fully powder coated for longevity,corrosion and rust resistance.
  • Comes complete with mounting plate, hardware for mounting mailbox and includes spacers for T2 sized mailboxes.
Check Stock

ICT Billet SBC Small Block Chevy 1\ Billet Valve Cover Spacer Aluminum 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-1

  • Used to raise valve covers for valvetrain clearance.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

Customadeonly 2 Pieces 0.59' 15mm Hub Centric Wheel Spacers Bolt Pattern 4x4.5 4x114.3 Center Bore 66.1mm Thread Pitch 12x1.25 Studs for Nissan 240sx S13 Sentra Maxima 200sx 280zx

  • [PRODUCT DETAIL] QTY: 1 Pair. Hubcentric design & Bolt on installation for 4x114.3 66.1mm 12x1.25 application for Nissan & Infiniti's Only. Width: 15mm per side..
  • [BENEFITS] Our Wheel spacers /adapters are made for offset correction, improving the performance in handling & overall appearance enhancement..
  • [CRAFTSMANSHIP] Customadeonly wheel spacers are crafted by the automated CNC process in our 4 Axis machining center. Delivering consistent quality & precision to every product that produced which eliminates the balance issue that other brands may have..
  • [QUALITY] Made with high grade 6063 T-6 aluminum, the material is known for high tensile strength and durability. Customadeonly wheel spacers are also backed by our 3 YEAR product warranty against any functional defects..
  • [INSTALLATION] Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs.
Check Stock

ICT Billet SBC Small Block Chevy 3/8\ Billet Valve Cover Spacer Riser 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-3

  • Used to raise valve covers for valvetrain clearance.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

Beyond Loch Ness

  • Cast from 3/8” thick recycled rust proof polished aluminum. Each number is painted using a high end powder coated stystem creating a long lasting smooth finish..
  • Mounting hardware for both a concealed flat mount appearance and spacers for a .5″ floating mount appearance are included (Mounts 1/2" off wall, or flush)..
  • Helpful tips for mounting your Modern House Numbers can be found on our website at montaguemetal where you will be able to download mounting templates for most of our sizes..
  • Common locations to mount your new address numbers, in both commercial and residential, are on walls, fences, posts, columns, garages, and monuments. Numbers can be installed on wood, stucco, stone, brick, concrete and metal..
  • Made in the USA, family owned and operated.
Check Stock

ICT Billet SBC Small Block Chevy 3/4\ Billet Valve Cover Spacer Riser 350 Compatible with Chevrolet Shaft Mount Roller Rocker Engines Clearance 551661-7

  • Used to raise valve covers .75 inch for valvetrain clearance.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes: 2 spacers, and mounting hardware.
  • These will require a gasket and/or sealer on both sides of the spacer.
  • Compatible with Small Block Chevy Valve Cover Spacers.
Check Stock

AFP: Aluminum Flash Powder Explosives

  • Cast from 3/8” thick recycled rust proof polished aluminum. Each number is painted using a high end powder coated stystem creating a long lasting smooth finish..
  • Mounting hardware for both a concealed flat mount appearance and spacers for a .5″ floating mount appearance are included (Mounts 1/2" off wall, or flush)..
  • Helpful tips for mounting your Modern House Numbers can be found on our website at montaguemetal where you will be able to download mounting templates for most of our sizes..
  • Common locations to mount your new address numbers, in both commercial and residential, are on walls, fences, posts, columns, garages, and monuments. Numbers can be installed on wood, stucco, stone, brick, concrete and metal..
  • Made in the USA, family owned and operated.
Check Stock

Adiyer M8 Screws for Samsung TV Wall Mount 304 Stainless Steel M8 x 45mm TV Mounting Bolts Screws for Samsung TV with 25mm Long Spacers

  • M8 x 45mm screws spacers washers kit fit for Samsung TV wall mount bracket..
  • Tested to fit for Samsung TV model: UN49MU8000, UN65MU8000, UN50NU6900BXZA, QN65Q6FNAFXZA, 2020 samsung 43” QLED Q60T, 2018 Samsung 65″ QLED, UN55KS8000, UN65KS8000, NU7100, NU7200, etc..
  • This M8 x 45mm screws kit fit for most samsung tv mount bracket over 43″, and please check your TV user manual first to choose correct mounting screws..
  • 304 stainless steel Phillips pan head Metric M8 machine screws with 1.25mm threaded pitch and 45mm threaded length.
  • Head Size: 13mm x 6mm/ 0.51″ x 0.23″(D*H).
  • 4x screws M8x45mm, 4x plastic spacers 15mm, 4x plastic spacers 10mm, 4x 2mm thick stainless steel flat washers, 4x 1mm thick stainless steel flat washers.
Check Stock

ICT Billet BBC Big Block 3/8\ Valve Cover Spacer Tall Flange Aluminum Compatible with Chevy Big Block Engines to Raise Valve Cover for Rocker Arms 551640-3

  • Compatible with big block Chevy valve cover spacers.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Used to raise valve covers for valve train clearance.
  • Includes: 2 spacers, and mounting hardware.
  • BBC big block 3/8" valve cover spacer tall flange aluminum.
Check Stock

Primary Arms SLX MD-25 Rotary Knob 25mm Microdot with 2 MOA Red Dot Reticle

  • Wide field of view, compact, lightweight, and durable.
  • 12 Illumination settings for bright days and night vision compatible.
  • Next generation ruggedized mounting system.
  • Includes risers and spacers for mounting to 0.96”, 1.41”, 1.54”, or 1.64” central height.
Check Stock

Magswitch Universal Featherboard (Set of 2)

  • INCLUDES: (2) Featherboards with Threaded 5 Star Knobs, T-Bolts, and Miter Slot Brackets.
  • FUNCTION: Provides optimal feed control and holding action for your stock with minimal kickback to provide you with high precision cuts.
  • FEATURES: This kit possesses additional hardware for adaptive mounting solutions, including miter slot brackets for horizontal mounting, vertical mounting for 3” multi-tracks and plastic spacers for stackable featherboards.
  • VERSATILE: This feather board contains a miter lock system (plus a reversible profile) that is compatible with both, t-slots and miter slots for table saws, band saws and router tables.
  • PREMIUM DESIGN: Manufactured in color-alert orange, these featherboards are quick and easy to adjust and are molded out of high quality plastic designed to give you functional flexibility and long term usage.
Check Stock