ReviewsMous Car Mount 2

Mous - Phone Card Wallet - Limitless 3.0 Accessory - Only Compatible with Mous Limitless 3.0 Cases

ONLY COMPATIBLE WITH Mous Limitless 3.0 Cases.
SLIM DESIGN - The minimal design ensures the card wallet is seriously slim and lightweight creating a stylish and practical way to store your most....
REAL LEATHER - We use high quality real leather to ensure the Card Wallet both feels and looks good..
AUTOALIGNPLUS CONNECTIVITY - Contains our improved innovative AutoAlignPlus technology, which seamlessly connects to our range of Limitless 3.0 cases....
LIFETIME WARRANTY - All Mous products come with a Limited Lifetime Warranty..

Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....

Check Stock

Car Grips Mount for Phone Stand, pop-tech 2 Pack Car Phone Holder for Collapsible Grip/Socket Mount Users with 3M Sticky Adhesive Replacement Used on Dashboard, Home, Desk, Wall - Black

Durable Car Grip Mount: More practical car phone mount with exquisite appearance. You could uses this flexible grip mount to work with your socket mount on the back of phone. Such Small that’s unnoticeable when not in use and can be adjustable for any directions what you want to keep the phone reach easily and your eyes on the road while driving. Perfect Gift for grip mount user..
What You Get: pop-tech 2 Pack black stylish grip mount, 2 Pack extra 3m sticky adhesive, 2 Pack large 3m sticky adhesive double sided tapes, 2 Pack Alcohol pads. Our worry-free 1 year warranty and friendly customer service. NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you’re unsatisfied with this item for any reason or need any assistance, we’ll immediately refund your purchase price or help you out of the issue..
Easy To Install: The material of grip mount we apply is high quality soft silicon gel and best sticky adhesive double sided tapes to hold the device more secure and comfortable for protecting the device and car dash. Just clean wherever flat surfaces what you want to install, peel off the sticker adhesive then stick on it, let it sit for 24 hours to settle for better connecting to the surface..

Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....

Check Stock

Olixar Windshield Phone Mount for Car - Easy to Use & Install - Olixar Dock & Go - Very Sturdy Even on Bumpy Roads - Universal - Black

[Easy To Use And Install] This Windshield phone mount will be ready to use in seconds.. This car phone mount windshield will hold even the largest of....
[Very Sturdy] This windshield phone holder holds your phone in place, even on the bumpiest of roads! Or if your car has sporty or stiff suspension.....
[Convenient For Long Trips] Windshield phone holder for car featuring super quick one handed mounting, meaning there are no delays to your journey!....
[Infinite Adjust] Ability and positions for your car phone holder mount. Full 360 degree rotation means this window mount cell phone holder for car....
[Manufacturers Guarantee] This car window phone mount comes with a 2 year guarantee from Olixar. This phone mount for car windshield was also tested....

Check Stock

Pop-Tech Ball Magnetic Car Phone Holder, Universal Dash Magic Mount Magnet Cell Phone Stand Mini Dashboard 360 Degree Rotating & Metal Plate for iPhone 13 Pro Max, Tablet, Socket Grip, Mobile Device

【Heat Resistant Stick-on Adhesive】 Pop-Tech mini magnetic car mount phone holder select high-temperature safe adhesive to maintain strong adhesion in the sun. 3M vhb sticky adhesive of mounted magnetic phone mount keeps powerful viscosity at high temp climate up to 248℉. No worry about magnet phone holder for car use in hot summer. 2 pcs extra adhesive replacement are included for re-install to replace the glue or change the position of magnetic car mount..
【All-Metal Strong Magnetic Phone Mount】 Upgraded version metal magnet phone mount introduce advanced premium N52 magnet, which holds cellphone tight. Just put your phone on the steele magnetic mount and feel it magnetically lock into place. Keep your mobile phone stable and far from vibration / impact in the vehicle in spite of sudden braking on bumpy road. Delicate magnet phone holder for car support your phone, tablet mini, GPS navigation securely on the center console..
【Easy to Install in Any Cars】 Luxurious stylish magnetic phone holder takes up very little space with compact size(1.06-inch base) and can be installed in limited area at ease. Just stick on car dash board after the surface is cleaned and dried. Finish installation in seconds and wait for 24 HOURS to use for bet....

Check Stock

SCOSCHE MQ2VP2-XT MagicMount FreeFlow Vent Qi Charging Mount

PORTABLE VENT MOUNT: Safely and quickly secures a mobile device to any vent type with the vent clips, and can easily be moved from car to car.
MAGNETIC MOUNT: Phone mount includes extra powerful Rare-Earth neodymium magnets provide a secure grip to your devices.
Qi WIRELESS CHARGING: Charging mount is compatible with most Qi enabled fast charging devices.
CONVENIENT DESIGN: The free flow phone mount open design allows air to flow through the vehicle vent without any obstruction.
INCLUDED IN PACKAGE: (1) Qi-wireless charging universal dual-rotating mount, (1) Vent clip, (2) MagicPlates, (2) Wire clips, (1) Car power adapter,....

Check Stock

TechMatte Magnetic Car Phone Mount (2-Pack) - Universal Air Vent Magnetic Phone Mount Holder (2-Pack, Black)

The strong neodymium magnets of this car mount are what separate it from other magnetic vent mounts. This Universal magnetic car mount phone holder produces an intensely powerful magnetic attraction that will hold most smartphones, including Apple iPhone X, iPhone Xs, iPhone XR, Samsung Galaxy S9/S10/Note9, HTC 10, LG G5, Google Pixel 2..
The high quality rubber construction of this car mount makes it perfect for your cars air vent. It guarantees that the base of the mount will hold firm to your air vents, to help keep your smartphone (eg. iPhone X, Galaxy S9) in place during most driving conditions..
Rotate your smartphone and swivel your display as you please. The base of the magnet mount phone holder remains fixed into the air vent slats of your car and does not move allowing you to choose the best position for you..
This MagGrip air vent universal smartphone magnetic car mount holder is easier to use than any other magnetic car mount due to its simple and minimalistic design. It has a sturdy rubber base and a powerful magnetic head for holding smartphones..
The minimalistic design of the magnetic car mount holder is one that allows you to place a metal plate onto the back of any smartphone. The magnetic mount phone holder plate has a smooth surface t....

Check Stock

WixGear [2 Pack] Universal Air Vent Magnetic Phone Holder for Car Phone Mount for Car for Cell Phones and Mini Tablets New Upgraded Vent Locks

New Hook Shaped Vent Phone Mount: Ensure your phone's safety with this magnetic phone holder for car . It has a hooks attached tightly to your air....
2 Pack Phone Mount For Car: Double your satisfaction with this car phone holder mount. With this phone holder car, both the driver and the passenger....
Stronger Magnets: This air vent cell phone holder car is made with 6 built-in strong magnets and it can hold 15 times the weight of an iPhone 13 or....
Easy To Install: This car phone mount fits most types of air vents. Simply attach the hooks of this vent car mount to the vent blades and turn the....
Anti-Scratch Silicone Clip: This iPhone car mount grips to your phone and makes it secure without hurting your air vent blades through it's....

Check Stock

PellKing Magnet Camera Mount for GoPro,Heavy-Duty Metal Car Powerful Magnetic Camera Mount with 360 Degree Rotation Ball Head for Car Body,Compatible with GoPro Hero 9 Black 8/7/6/5,Etc

【Super Magnet power】:This Pellking magnetic mount adopts triangle structure design,There are two strong magnets mount at the bottom,It can be firmly mounted on the iron part of your car body, provides a stable shooting environment. You’ll never worry about the camera being unstable or slipping..
【Wide angle adjustable】:Rotatable magnetic car mount allows 360 degree rotation for your shooting from any angles, meet your all-around shooting requirement. Enjoy the fun of shooting.it allows you lock your camera at the best visual angle and capture your best shots.
【Multiple usage scenarios】:This Pellking Metal magnetic mount can used for Car outside and inside,such as car roof,car hood,car trunk,and car dashboard,even the iron part of your car seat.Can be used in a variety of intense action shooting,such as cars,boats,jet skis,etc.
【Wide Compatible】: Compatible with All GoPro Action Cameras including GoPro Hero 10/9/8/7/6/5 Blcak,HERO Session,GoPro Hero(2018),etc.And other action cameras with 1/4 interface at the bottom.and gimbal stabilizer for phone. add a mobile phone clip（not included） with 1 / 4 interface at the bottom,then can be used for phone..
【Package List & Guarantee】:This magnetic car mount included a magnet mount part(w....

Check Stock

Wireless Car Charger, Tenpoform 15W Qi Fast Charging Car Charger Auto Clamping phone Mount Air Vent Dashboard Windshield Phone Holder for Wireless Charging Phones Like iPhone, Samsung, Google, LG, etc

...r source for fast charging. (The QC 3.0 car charger is not included.) NOTES: PLEASE DON’T USE GENERAL CAR USB, that will NOT work. PLEASE USE THE ADAPTER THAT INPUT IS 5V2A and 9V2A AT LEAST. OTHERWISE CHARGING WILL BE CONSTANTLY GOING ON AND OFF..
【2-IN-1 Design】Combines the wireless phone charger & car phone mount, offers fast qi car charging for your phone and saves you from messing with cables and cases while driving. With this car wireless charger, a 360 rotating and pivoting ball joint can help you get the most comfortable and safest viewing without neck or eye strains while charging your phone..
【2 Types Phone Mounts】Tenpoform phone holder car wireless charger comes with 2 types of phone mounts. Dashboard suction cup mount and air vent mount. Dashboard mount has enhanced suction cup(for flat surface only) and air vent mount has an extra support component, all these ensures a secure grip even driving in bumping road.The 360 rotating sphere and the retractable & foldable bracket allows for optimum viewing and safe driving..
【Case Friendly and Anti-skid Silicone Pad Design】Tenpoform charging phone mount for car supports charging through phones cases up to 5mm thick. Please note that cases made of metal, external attachments such as mag....

Check Stock