ReviewsMovable Pipe End Bevel

Wilton 656UHD Utility HD Bench Vise, 6-1/2\ Jaw Width, 6-1/4\ Jaw Opening (28815)

  • LARGE ANVIL WORK SURFACE: For forming and shaping materials..
  • IDEAL POSITIONING: Swivel base rotates 360° and has double lockdowns..
  • VERSATILE CLAMPING: Built-in pipe jaws handle a range of pipe sizes..
  • BUILT FOR RUGGED USE: 30,000 PSI gray cast iron body and movable jaw, with a 60,000 PSI ductile iron base..
  • TOUGH DURABLE SURFACE: Powder coat paint resists scratches..
Check Stock

Heavy Duty Pipe Clamp Jaws, 1 inch Heavy Duty Pipe Clamp Vise Fixture Set Wood Gluing Pipe Clamp Fixture Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly

  • GREAT CHOICE FOR WOODWORKING: This jig is perfect for woodworking work on cabinets and crates. Woodworking cast iron clamps with ergonomic handles make clamping easier and reduce hand fatigue.
  • HIGH QUALITY PERFORMANCE: The pipe clamps are made of solid cast steel, durable and sturdy. Keeps wood stable as you work, a great addition to any woodworking bench in your home or shop.
  • EASY TO USE: The woodworking jig is easy to handle. Just slide the tailgate over the pipe on the other end. Then put the coil spring stopper on the pipe thread at the end of the pipe to prevent the end from sliding out of the pipe during adjustment and away from the clamped workpiece.
  • HIGH QUALITY CAST STEEL MATERIAL: The pipe clamps are made of high hardness and high quality cast steel material, which is durable enough to meet the needs of your daily work. Wide range of uses, can be used as wooden clips, water pipe clips, plastic clips.
  • WIDE USE: Woodworking pipe clamps measure 1" and weigh 1760g/62.1oz (approx.). Often used in metalworking, woodworking and frame assembly, from DIY to industrial product....
Check Stock

rawr im 4 Year Old boy Shirt Roar 4th Birthday Shirt boy Four Dinosaur Tshirt Charcoal Blue 4T

  • Connects 4 in. S&D pipe to 4 in. S&D pipe & NDS parts that fit 4 in. S&D connections such as Spee-D, 5 in., & 8 in. Pro Series Channel Drain Outlets,....
  • Connects 4 in. Sewer & Drain (S&D) pipe to 4 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Connects 4 in. S&D pipe to select drainage products such as channel drain outlets and pop-up emitters.
  • Extend the pipeline by attaching 4 in. S&D pipe to one end of fitting and another 4 in. S&D pipe to the other end.
  • Comes with one PVC Coupling. Meets applicable ASTM standards. Hassle-free limited lifetime warranty guarantees the NDS product is free from....
Check Stock

Electronics-Salon 100W 100 OHM High Power Wirewound Potentiometer, Rheostat, Variable Resistor.

  • Use metal wire winding to make a resistor. It can withstand higher power than carbon or porcelain gold film..
  • The potentiometer can be used as voltage divider,rheostat and current controller..
  • Good contact between the center sliding end and the resistor body, smooth rotation..
  • The resistor body of the potentiometer has two fixed ends. By manually adjusting the rotating shaft or the slider and changing the position of the movable contact on the resistor body, the resistance value between the movable contact and any fixed end is.
  • High resolution,the resolution of the potentiometer reaches 100%..
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

END CLAMP / PANEL T CLAMP: 1-3/8' Chain Link Fence Clamp (for t-ing into a pipe (1-3/8' x 1-3/8'). 1 CLAMP

  • ✔ Pre-measure outside diameter of fence pipe prior to purchase to ensure You order correct size.
  • ✔ This T-clamp allows you to "Tee" into a piece of 1-3/8" chain link fence pipe with another 1-3/8" pipe..
  • Use for making extensions to an existing fence, connecting chain link fence panels, and more..
  • These end clamps are galvanized for long term exterior use. End/T clamps are easy to install..
  • Depending on what you are making you might want to purchase these in pairs one for each pipe end..
Check Stock

Rage Extreme 4 Blade Arrow Archery Broadhead, 100 Grain - 2 Pack

  • EXTREME 4-BLADE BROADHEAD - Designed to produce the enormous entry and exit wounds required for extreme blood trails, the Rage X-Treme 4-blade leaves nothing to chance.
  • ALUMINUM FERRULE - Combining a streamlined black anodize aircraft-grade aluminum ferrule with fixed and movable blades to deliver total cutting surfaces in excess of over 3.1-inches..
  • CUT ON CONTACT TIP - The .030” thick single-piece, 7/8” cut-on-contact tip and two double-bevel .035” expandable wing blades.
  • SLIP CAM TECHNOLOGY - Like all Rage broadheads, the new X-Treme 4-blade features Rage’s exclusive Slip Cam technology for reliable blade deployment.
  • RAGE - Leading the Evolution in Mechanical Broadheads. Made in the USA.
Check Stock

24-Inch Digital Torpedo Level and Protractor | Neodymium Magnets | Bright LCD Display | IP54 Dust/Water Resistant smart level with Carrying Bag

  • HIGH-ACCURACY — Accurate to the ±0.1° at 0° and 90° and ±0.2° from 1-89°..
  • displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. Great for roofs, rails, ADA ramps.
  • JOBSITE TOUGH — Sturdy solid I-beam aluminum frame, Neodymium magnets, rubber end caps and IP54 dust/water splash resistant protection for harsh working environments.
  • DUAL FUNCTIONALITY With STRONG NEODYMIUM MAGNETS — As a true (absolute) digital level and electronic inclinometer / protractor lets you set or check relative angles between surfaces. Plus, magnetic base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication and more.
  • LARGE, BRIGHT GREEN LCD DISPLAY With AUDIO INDICATOR — This level features a large, bright LCD display that flips, so you can easily read your measurements all day and night – even in the darkest spaces. What’s more, we craft our digital level with audio indicator functionality, so you can achieve level and 90 degrees even with your eyes closed..
  • MEMORY RECALL FUNCTION/HOLD FUNCTION — It’s the fact that it has a memory function that can store your last 8 angle measurements, and how with a hold of a button you can transfer target values t....
Check Stock

Liyafy Guitar Fret File Curved Surfaces Design Sanding Leveling File Luthier Tool 35 Degree Fret Bevel

  • Sturdy construction from maple, it is easy to carry and use and not easily damaged..
  • 35-degree bevel angle is perfect for beveling the entire neck at once..
  • Ergonomic design for comfortable holding.Good hand feeling, ideal for music lover..
  • Professional finished look and with proper additional smoothing & polishing, making them much easier on the fret end dressing..
  • The guitar fret bevel tool is suitable for bass, ukulele, banjo, mandolin, neck and other string instruments..
Check Stock

Pipe Swing Set Top Bar Frame - Straight V

  • The Top Pipe Center Frame can be used to extend a Stand Alone Pipe Swing Set.
  • Quick Way to extend a Pipe Swing Set. Hardware Included.
  • All you Need is Two Pipe End Frames , Four Swing Hangers, Four Metal Pipe Legs & One Top Metal Pipe for Complete Set.
  • Top Pipe Fits 2 3/8" to 2 1/2" Diameter Metal Pipe and Legs Fit 2" Diameter Metal Pipes...
  • Please take the product with you when purchasing the pipes to make sure it fits.
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock