ReviewsMovement Parts

CRAFTSMAN 3-Pack 10-Compartment Plastic Small Parts Organizer (CMST60964M)

  • Removable dividers provide high customization for small parts and larger hand tools.
  • Two side latches lock top lid, keep contents secure inside and allow secure stacking of additional organizers.
  • Unique 90 degree angle allows combination of tools and small parts storage.
  • Special lid structure upper lid interlocking with dividers prevents movement of small parts from one compartment to another.
Check Stock

StFlyBro 2 Silent Sweep Clock Motor Movement Mechanism with 5 Pack Different Size and Colorful Clock Hands (Black)

  • High Torque, Accurate Time Keeping & Silent: 2 Pieces “Push-O” (“O” Shaft) clock movement are included. They are accurate and dependable when in motion, and the second hand spins without any ticking. “CE” & ”RoHS” Certified clock motor. Non ticking clock movement battery operated, reducing noise, give you a comfortable time to sleep, work or study. This clockworks replacement can replace a Sangtai clock movement, such as a Sangtai 5168, 5168S, 6168, 6168S, 7168 and 7168S clock movement..
  • Broad Applicability and Styles: 5 different style & size clock hands are included. An appropriate style & size set can fit for many clocks. Also, there are more options to decorate the clock face. All sets are good for replacement, repair and making of many clocks. This clock movement parts are used in table clock, wall clock, craft clock, cross-stitch clock, three-dimensional embroidery clock and frame-less draw clock, etc. It will help you to be a skilled clock maker..
  • Easy to Assemble: StFlyBro clock mechanism and hands combo provide many parts to easily repair, replace and make a clock. The total length of the shaft of this clock motor is approx. 7/10in (17.5mm), with a thread length of 2/5in (10.5mm) that allows a clock face up to 3/10in (7.5....
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Long Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 28.6 mm (1 1/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Check Stock

Quartex Standard Push-On Movement with Hex Nut - Short Shaft

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 14.3 mm (9/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Check Stock

High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)

  • Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm).
  • Total shaft length: 28 mm (1-1/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
  • Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length.
  • Note: please check the size before buying.
  • Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself.
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

Quartex Spacekid & Andre Wildenhues Extended

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable....
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick....
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and....
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (20 mm, Gold)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

Quartex Q-80 Quartz Clock Movement, 3/16” Max Dial Thickness, 5/8" Hand Shaft Length

  • Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
  • Clock Movement Measurements: Total hand shaft length is 15.9 mm (5/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
  • Maximum Clock Dial Thickness: 4.8 mm (3/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 6.4 mm (1/4 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 6.4 mm (1/4 inch), this is suitable..
  • Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
  • Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand m....
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (28 mm/ 1.1 Inches)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 28 mm/ 1.1 inches, and the thread length is approx. 20 mm/ 0.79 inches.
  • Jump second movement is suitable for 13-18 mm/ 0.51- 0.71 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

YOUNGTOWN 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (1 Set)

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions..
  • Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements..
  • Parameter: High Torque "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • total shaft length is 28 mm (1-2/32 inch), thread length is 15.4 mm (39/64 inch). 9-13 mm ( 23/64 - 1/2 inch ) thickness clock panel..
  • Clock hands kit: package includes 1 minute hands and 1 hour hands, 1 second close nut, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame..
Check Stock