ReviewsMpm10cr Bbeverstar

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

HICTOP Heated Bed for 3D Printers (310 * 310mm, 12V)

It is compatible with Creality CR-10 / CR-10S 3D printers.
Hotbed cable and Insulation Mat are included in this package.

Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

Aluminum 3D Printer Parts Filament Break Module Detector Sensor Run Out Pause Monitor for Creality CR-10 V3 V2 / SV03 / CR-10S Pro V2 / CR10 Max/Ender 3 Max/Ender-6 /CR-3040 Pro (Filament Sensor)

This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
This Filament breakage sensor save your filaments when a strike occures. Its cover is made from Aluminum material, red surface treatment, looks beautiful..
Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
Precise Detection: Blue LED indicates normal filament feed-in.
Blue LED turns off when filament runs out..
Original from Creality, can be used without any adjustment for Creality CR-10 V3 / SV03 / CR-10 V2/ CR-10S Pro /CR-10S Pro V2 / CR-10 Max /CR-10 Max /Ender-3 Max / Ender-6 /CR-3040 Pro /CR-5Pro 3D Printer.

Check Stock

HICTOP All Metal Extruder Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10, CR-10S, CR-10 S4, and CR-10 S5

[UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
[REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5..
[Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame.
[EASY OPERATION]: DIY kit and you need to assemble by yourself..
[SERVICE COMMITMENTS]: We offer 1 YEAR Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back..

Check Stock

Replacement Battery Part No.54-57-00046 for SanDisk Sansa E200, SanDisk Sansa E250, Sansa E250R, Sansa E260,Sansa E260R, 750mAh MP3 Player Battery

-Replacement Battery for SanDisk Media/MP3/MP4/MPM Player.
-Compatible Model:SanDisk Sansa E200,SanDisk Sansa E250,SanDisk Sansa E250R,SanDisk Sansa E260,SanDisk Sansa E260R,SanDisk Sansa E270,SanDisk Sansa E270R,SanDisk Sansa E280,SanDisk Sansa E280R.
-Replacement Battery Part No.:54-57-00046,SDAMX4-RBK-G10.
-CE/RoHS/ISO 9001 Certificates,14-day Money Back Guarantee and 12-month Warranty.

Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..

Check Stock

Turntable Needle Record Player Stylus Replacement for ION ICT04RS - IONTTUSB10, ITTCD10, LPDock, LP2CD, LP2Flash, IProfile and Profile Flash (Pack of 2) Red

*Turntable needle Ruby stylus replacement needles : Suitable Replacement for the following models ION PROFILE PRO, PROFILE, PROFILE PLUS, PROFILE LP USB DELUXEI, ITTUSB05, ITTUSB, ITTUSB1, ITTCD10, IPTUSB TTUSB05, TTUSB, TTUSB10, PTUSB, LPDOCK, ITT03X, IDJ03, DJ02M.
*For ION Crosley Turtnable Stylus Record Player Needle for ION ICT04RS - ION TTUSB, TTUSB10, ITTCD10, LPDock, LP2CD, LP2Flash, IProfile and Profile Flash, Crosley CR24003A, CR2402C, CR2413A, CR245, CR246, CR249, CR6001A, CR6004A and CR6249A, for other ones need to check with us..
*Same Sound Quality as Original one: Play 33/45/78 RPM vinyls. Stylus only not include cartridge.
*Easy to install, Perfect as a replacement needle for your broken or lost one And keeping as a backup for your old one, play your vinyls again,.
Good moving magnet (MM) Stylus replacement for your vinyl LP Player（ cartridge is not included） , any questions, welcome to contact us..

Check Stock

Official Creality CR-10 Smart 3D Printer Large 3D Printers with Auto Leveling Enhanced Stability 300mm × 300mm × 400mm Beginner 3D Printers for Home Use

Your Easy Start in 3D Printing: The hassle-free auto leveling system and easy-assembled modular design of the CR-10 Smart allows you assemble and print with ease, getting you off to a great start in the 3D Printing World..
Large Build Volume: The new Creality CR-10 Smart inherits the large build volume from the CR Series, the CR-10 Smart, with 300mm × 300mm × 400mm (11.81in × 11.81in × 15.74in) build volume, allows you to print large..
Enhanced Structure: Dual Z-axis lead screws in combination with two support strut bars provide stable Z-axis motion on the CR-10 Smart..
WiFi Connectivity and Cloud Printing: With a built-in WiFi module, you can connect your CR-10 Smart to the Creality Cloud, which allows you to keep an eye on your printer and print your models on the go..
4.3" Color Touch Screen: CR-10 Smart comes with a 4.3 inch LCD color touchscreen, which has quick response, sharp color and broad viewing range. In addition, the screen, with auto-dimming feature, will dim being left inactive for 30 minutes..

Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..

Check Stock

Creality 3D Printer Kit with Aluminum Ender 3 Extruder Upgraded, Compression Die Springs for Bed Leveling, Metal Hand Twist Leveling Nut Suit for Ender 3 Pro/5/5 Pro, CR-10 Series/10V2/20/20 Pro

【Great Replacement】Our Tresbro perfect aluminum adjuster wheels, bed leveling springs combined with the all metal extruded made a big difference in the print quality for your Creality 3D printer. They are awesome upgrades kit for Ender 3, Ender 3 Pro, Ender 5, CR-7, CR-8, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR 20..
【1*Silver Metal Bowden Extruder】The all metal Mk-8 extruder feeder drive 1.75mm filament is very well built and seems to grip the filament alot better than the plastic stock one, that can prevents downtime from the stock plastic version failing, no worries about filament scraping or breaking..
【4*Hand Twist Level Nuts】Metal nuts was more powerful and will twist more tightly than the original plastic nuts. The torque of these nuts is large, making it easier to fine tune the hot bed, which keeps your printer level without having to level it often..
【 4*Small Yellow Compression Springs】The die springs are a worthwhile upgrade, making bed levelling easier and stronger than the stock ones, so you don't have to worry about leveling the bed over and over after wash print..
【 Easy To Install 】 They were super easy to install and works like a charm. Your 3d printer was in major need of these s....

Check Stock