ReviewsMs Three Phase Electric

RecPro RV Tank Sensor Monitor Panel M21 | KIB Replacement | Panel Only | Level Sensor | Fresh Water or Holding Tank Level Sensor (Black)

  • INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors. Supports single-phase up to 240VAC line-neutral.
  • and three-phase up to 415Y/240VAC (no Delta). Panels with access only to busbars will need flexible sensors available from Emporia Energy. A professional electrician is recommended..
  • 24/7 ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. Light commercial 3 phase option available as a separate bundle. PROTECTED BY A 1-YEAR WARRANTY..
  • APPLIANCE MONITORING WITHOUT GUESSWORK: Comes with sixteen (16) 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc..
  • LOWER YOUR ELECTRIC BILL: Gauge real-time spending and get actionable notifications to understand where you can save costs..
  • REAL-TIME ENERGY DATA: REQUIRES 2.4 GHz WIFI WITH AN INTERNET CONNECTION to monitor energy use with iPhone / Android app. Vue sensors provide 1-second data and are accurate from ±2%. The Vue is UL and CE ....
Check Stock

CR Magnetics CR4580-500 True RMS AC Voltage Transducer with 3 Phase and 4 Wire, 20 Hz - 5 KHz, 0 - 300 Output Load, 24 VDC +/-10%, 0-500 VAC Input Range, 4 - 20 mADC Output Range

  • True RMS measurement for distorted alternating voltage waveforms.
  • Response time of 250 ms (10-90% step change).
  • Four-wire input for measurement of three-phase loads.
  • UL Recognized and CE certified for quality assurance.
Check Stock

CR Magnetics CR6260-150-5 AC Power Transducer with 3-Phase and 4-Wire Active Power, 20 - 5 KHz, 0 - 300 Load, 12 VDC, 0-150 VAC 0-5 AAC Input Range, 4 - 20 mADC Output Range

  • Average RMS measurement for sinusoidal alternating current waveforms.
  • Response time of 250 ms (10-90% step change).
  • Four-wire input for measurement of three-phase active power.
  • UL Recognized and CE certified for quality assurance.
Check Stock

3 Phase Voltage Monitoring Sequence Relay JVR800-2 Voltage Protection Relay Under Over Voltage Protector

  • The Composition of This Product: Three-phase voltage protector, chronograph and counter are integrated in one relay..
  • Function: This voltage protection relay has overvoltage, undervoltage, phase loss, phase sequence and unbalanced three-phase voltage protection..
  • Practicality: This 3-phase voltage relay does not require an external power supply. Has practical functions: power delay, output test, etc.
  • 2 rest modules are optional, manual and automatic..
  • The LCD can display data for easy reading..
Check Stock

CR Magnetics CR6250-500-5 AC Power Transducer with 3-Phase and 4-Wire Active Power, 20 - 5 KHz, 003e=2K Output Load, 12 VDC, 0-500 VAC 0-5 AAC Input Range, 0 - 5 VDC Output Range

  • Average RMS measurement for sinusoidal alternating current waveforms.
  • Response time of 250 ms (10-90% step change).
  • Four-wire input for measurement of three-phase active power.
  • UL Recognized and CE certified for quality assurance.
Check Stock

CR Magnetics CR6251-500-5 AC Power Transducer with 3-Phase and 4-Wire Reactive Power, 20 - 5 KHz, 003e=2K Output Load, 12 VDC, 0-500 VAC 0-5 AAC Input Range, 0 - 5 VDC Output Range

  • Average RMS measurement for sinusoidal alternating current waveforms.
  • Response time of 250 ms (10-90% step change).
  • Four-wire input for measurement of three-phase reactive power.
  • UL Recognized and CE certified for quality assurance.
Check Stock

MXR M290 Mini Phase 95 Phaser Effects Pedal for Electric Guitar included 2 x Senor Path Cable and Instrument Cable

  • MXR has combined two of the most used phaser pedals ever made in the MXR Mini Phase 95 pedal Phaser effects pedal for electric guitar.
  • The original Phase 90 pedal was a four-stage phaser that practically defined the phaser sound for electric guitar, and the Phase 45 that followed was a two-stage phaser that delivered a smoother sound that blended better with certain music styles.
  • You get both flavors in the MXR Mini Phase 95 pedal, switchable with the 45/90 toggle switch.
  • The "Script" switch toggles feedback in the effect, providing a pronounced sweep when on and a lusher, more subdued sound when off.
  • Many guitarists choose MXR phasers for their pedalboards, and the MXR Mini Phase 95 pedal offers two iconic phaser effects in a single road-worthy stompbox guitar pedal guitar pedals pedal guitar pedal for guitar guitar multi effects unit.
Check Stock

DGU Series Lighting Control with Photo/Override Input Control Time Switch, Metal Indoor NEMA 1 Enclosure, 120-277 VAC 50/60 Hz Input Supply, SPDT Momentary Output Contact

  • Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient..
  • The dynamic sound and light indicates the positive or negative phase of the phase sequence of the three-phase power supply, which is clear at a glance..
  • More sensitive ETCR1000C clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity..
  • It has a better power-saving performance with the maximum rated power of 300mVA..
  • The three clamps of ETCR1000C are in three colors, it is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance..
Check Stock

SP-93/SP-94/MS3 Series Shaver Foil Screens & Cutter Blade Head fit for Remington SP-94 Microscreen 3 Fits all MS3 Models MS3-1000 MS3-1700 MS3-2000 MS3-2700 MS3-3000 MS3-3500 MS3-3700 MS3-4000

  • Fits all MS3 Models: MS3-1000, MS3-1700, MS3-2000, MS3-2700, MS3-3000, MS3-3500, MS3-3700, MS3-4000, MS3-4500, MS3-4700, MS3-0004, RS8503, RS8966,....
  • For use with Remington MicroScreen 3 TCT MS3-1000, MS3-2000, MS3-3000, MS3-4000. Includes three cutters and three screens. Flexing screens adjust to....
  • Replacement foils& Replacement cutters Includes 3 SCREENS & 3 CUTTERS,This parts made by 4G-kitty..
  • This parts made by 4G-kitty, not made by Remington.
Check Stock

Replacement Shaver Blades and Foils Screens for Remington SP-67/SP-69 MS2-series

  • Fits The Following Models: MS2-90 MS2-100 MS2-150 MS2-200 MS2-250 MS2-260 MS2-270 MS2-280 MS2-290 MS2-300 MS2-370 MS2-390 MS2-391 MS2-392 MS2-400....
  • Replacement Foil & Cutter Twin Flexible Micro Screens Fits Remington MS2, TCT DOUBLE screen electric shaver models..
  • The inner cutters are made in Portage, WI and the outer foils are designed in the Netherlands..
  • SP69 Features: Replacement Foil & Cutter Twin Flexible.SP69 replacement foil and cutter has twin flexible micro screens that allows for easy....
  • This parts made by 4G-kitty it is not made by Remington..
Check Stock

Remington SP-94 MS3 Series Shaver Foil Screens & Cutter Blade Head

  • Easy to install. Replace your shaver parts every 18 months to maintain peak performance..
  • Fits Remington electric razor models MS3-1000, MS3-1700, MS3-2000, MS3-2700, MS3-3000, MS3-3500, MS3-3700.
  • Please make sure if this product is compatible with your razor..
  • Please clean the razor before installation..
Check Stock