ReviewsMulti angle Drill Bit

Craftsman CMXGHAMDHT25 25cc 22-in Hedge Trimmer - 2 Cycle Engine with Easy Start Technology, Liberty Red

  • POWERFUL AND LIGHTWEIGHT: 25cc, lightweight 2-cycle engine for ease of use. Multi-position adjustable handle for operator control and ease of use.
  • EASY PULL STARTS: Easy Start technology for simpler pull starts. Additionally electric start capable that eliminates manual pull starts with an electric start drill bit (Drill Bit and Drill Sold Separately).
  • LARGE SPAN OF MOVEMENT: 135 degrees of movement to hedge at all angles. 22-in dual action blades for premium hedging.
  • USER-FRIENDLY DESIGN: Contour handle with overmold for operator control and ease of use..
  • ATTACHMENT CAPABLE: Compatible with the TrimmerPlus multi yard tool system, to convert the Hedge trimmer into other lawn care products (attachments sold separately). 2 cycle oil and 2 year limited warranty..
Check Stock

Drill Doctor 750X Drill Bit Sharpener with 180 Grit Wheel and 100 Grit Wheel

  • High-quality accessories: The diamond sharpening stone is made of high-quality ABS plastic and brown corundum grinding wheel. It has high hardness, rust resistance, sturdiness and durability. It is suitable for grinding iron drills, but not suitable for very high hardness drills. (If the product with high hardness is ground, it will be shorter than the service life)..
  • Convenient to carry: You can carry this diamond sharpening stones portable drill bit sharpener in your truck toolbox so that you don’t have to go to the hardware store to buy it. In a critical juncture, this tool will do your job well enough, Saving the days of manually searching for the correct angle or accidentally making the edge of the tool tapered..
  • Wide application: The drill bit sharpener is made of a standard hexagonal shank, which is widely applicable. The hexagonal shank has a 6.35mm (1/4) shank diameter on the opposite side. It is suitable for 2~15mm drills. The angle and width can be adjusted. It is suitable for manual and pneumatic screwdrivers. It is very convenient to apply various tools..
  • Increase the life of the drill bit: Small house repair work makes your drill bit dull. These diamond sharpening stones make them brand new. After using it on the drill bit sharpener, the....
Check Stock

Muzata Upgraded Multi Angle Drill Guide Fit 25 30 35 40 45 90 Degree Cable Railing Kit Stair Visible Template Jig 4 Sizes Guide Track for Straight and Angle Hole Wood Post CT19 CT1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal or vertical straight holes and 25 to 45 degree angle holes for the wood post. Suitable for drilling holes with unconventional angles and standard angled. Package includes: 1pc drill guide.
  • Various drill bit sizes – This cable railing drill template guide jig offers 4 different sizes of guide tracks(fit 3/16”,9/32”, 5/16”,13/32” drill bits), compatible with most cable railing kit hardware. The hole drilled by 5/16″ drill fit most of 1/8″ cable railings lag screws. The fixing metal sleeve of the desired size can be replaced by adjusting the Jack bolt. The reserved gap between drill bit and metal sleeve can prevent the wear of drill bits and sleeves when drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility so it is easy and accurate to position on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden woo....
Check Stock

32pcs Flexible Drill Bit Extension Set, Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter, 105°Right Angle Drill Attachmen, Bendable Drill Bit Extension Screwdriver Kit with a Box (Silvery)

  • ✑Drill Extension Kit: The drill kit is made of heavy-duty chrome vanadium steel. Drill set including 2 x flexible drill extension, 1 x 105° right-angle drill bit extension, 1 x Universal Socket Wrench, 3 pieces of 1/2, 3/8,1/4 universal socket adapter kit, 3 x 360°Rotatable Impact Driver Bit Set, 3 x quick release magnetic drill extension Pieces, 1 x Wrench power drill adapter tool, 8 hex shank impact driver socket adapters, 10 in 1 set combination screwdriver bit set, 1 x packagebox, durable, and can be used for a long time..
  • ✑Bendable Flexible Drill Extension: Bendable drill extension can use be twisted and rotated at different angles, The screwdriver flexible shaft can be drilled into a small space or variety of gaps to work and is easily to fold and take anywhere, complete match to meet daily needs..
  • ✑105° Right Angle Drill And Socket Wrench: Use in which you use when you have hard places to get to, can to connect a drill, rechargeable drill or manual wrench to extend it to inaccessible narrow places flexible installation work. Universal socket wrench can automatically adjust to any size or shape, suitable for standard 1/4 to 3/4 inches nuts, screw....
Check Stock

Diamond Drill Bit - BRSCHNITT 1/4 inch Masonry Drill Bits Set for Porcelain Tile Ceramic Stone Granite Marble,Hex Shank Diamond Hole Saw Drill Bit(5pcs/Pack).

  • ✔ Wide Applications--Diamond core bits are worked great for dry drilling holes through hard porcelain tile, ceramics,bathroom tile,granite & marble, masonry, concrete, glass, hard plastic with ease. Using water could prolong the lifetime.
  • ✔ Widely Use--Carbide Triangular Drill bit mainly used to provide accurate positioning for diamond bit，.
  • ✔ Size --5pcs/pack 4pcs1/4"(6mm) diamond drill bit&1pc Carbide Drill bit, diamond height 8mm, total length 65mm,quick-fit 6.5mm,diamond grit #50/60 of diamond core drill bit.
  • ✔Diamond drill bit--Using vacuum brazed technology ,which increases resistance to temperature and friction,to make the diamond particles better attach to the core steel,imporve the performance and lifetime.Constructed with high grade diamond grit for effortless cutting and improved durability in tough applications.High-quality core steel body helps to be more efficient and durable, not easy to deform.
  • ✔ Machine --Suitable for any electric drill,hand drill,Bench Drill, When use Angle Grinder,please install angle grinder drill chuck.
Check Stock

23 Flexible Drill Extension Hex Shank Drill Bit Kit Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter Socket Bendable Drill Bit Extension Screwdriver 105 Degree Angle Drill Bit Extension

  • Home DIY Tool Set : you will receive 1 piece bendable drill bit extension, 3 pieces socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch), 3 pieces 360 degree rotatable joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 pieces screwdriver bit sets, 1 piece 105 degree right angle drill extension, 1 piece socket wrench, 1 piece 90 degree right angle screwdriver bits soft shaft and 3 pieces magnetic screwdriver bit sets.
  • Socket Adapter Set: each socket adapters set and 360 degree rotatable power drill adapters set comes with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other tools.
  • They are suitable for standard 1/ 4 to 3/ 4 inch and metric 7 mm to 19 mm screws.
  • Screwdriver Bit: there are 3 pieces 1/ 4 inch hex shank drill bits, adopting quality steel materials, practical and reliable, featuring high strength and wear resistance, with length of 60 mm/ 2.36 inch, 100 mm/ 3.94 inch, and 150 mm/ 5.91 inch respectively, which are applicable for electric and pneumatic screwdrivers and other electric tool screwdrivers, drill bit extensions.
  • Widely applicable: this impact socket adapter set is suitable for light drilling, slow speed or screw dr....
Check Stock

Right Angle Attachment Electric Screwdriver Repair 90 Degree Corner Device Screwdriver Socket Adapter Drill Bit Corner Adapter

  • ...the hard to reach and awkward screws that lay around corners and hide up in tight spaces..
  • 10 Shockwave Positions: PH2, PZ1/2/3, TX10/15/20/25/30. Full metal casting structure of ABS, high-strength alloy steel provides good strength and durability. Impact ready right angle drill attachment - perfect for drilling or driving in tight spaces..
  • Impact Value: This Electric Screw Driver Corner Device Suitable for the latest 18V impact driver and drill bit. This flexible drill bit extension can be connected to drill bits, rechargeable drills or manual wrenches to expand its range to inaccessible narrow places, tighten screws, nuts, etc. These tools are suitable for light or slow screw-driven drilling rigs, such as cordless electric drills, ratcheting manual screwdrivers, etc..
  • Humanized Handle Design: This right angle driver drill adapter adopts with an ergonomic abs handle, which does not get hot while in use, so it allows for tighter access with your current impact driver to increase gear strength..
  • Great Tool for You: Quick and easy screwdriver bit change. It can be used with screwdriv....
Check Stock

LEIGH Box Joint & Beehive Router Jig, Model B975

  • Pocket Hole Jig Kit tool is of high quality, made of solid aluminum, will not rust or crack, and can easily drill oblique holes to make the joint perfect. At the same time, this fixture can create flush, angle and angle shapes Pocket hole connector for connecting legs and guide rails, building cabinets.
  • Mini pocket 850 heavy duty compact pocket hole jig can be held by one hand, designed for portable or desktop installation, very suitable for DIY household projects or professional and general commercial use. DIY craftsmen use this fixture kit to build their own woodworking projects.
  • Simple and easy to use: Use a jig to drill an inclined counterbore in a joint. Then, screw the self-tapping screw (without pilot hole) into another part, and easily and quickly drill the inclined hole to hide the screw in the wooden furniture to form a precise woodworking hole to create or repair the wood joint.
  • 15 drill angle, 2-way tilt, to ensure accurate screw connection, and then embed the screw to prevent the screw from hiding. Allows you to easily hide screws/fasteners. The 10mm drill bit adapter can be easily replaced according to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently without burrs.
Check Stock

Soda Pilot ~ Women Lug Sole Low Heel Chelsea Fashion Ankle Bootie w/Double Elastic Gore (White, numeric_7)

  • 【NUT AND SCREW EXTRACTOR SIZE】:These 6-Pieces Bolt&Nut extractors work on SAE/Metric sizes - 5/16"(8mm), 10mm, 9/16"(14mm), 11/16", 3/4"(19mm), with 3/8 "to 1/4"hex adapter. And 6-Pieces Screw Extractor: 1#, 2#, 3#, 4#, 5#, 6#..
  • 【MULTI-SPLINE EXTRACTORS AND DRILL BIT KIT SIZE】:10-Pieces Multi-Spline Extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". 10-Pieces Left Hand HSS Drill Bit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". All these tools are clearly marked..
  • 【LEFT-HAND DRILL BIT SET】:The left-hand drill bits of this extractor set are made of high-speed steel, strong than right-hand drill bits, and not easy to wear. The 135° angle design of the head makes it easier to touch the fasteners and ensures the precise countersinking and hole smooth clean..
  • 【SUPERIOR GRIPPING POWER】:Each lug nut remover is precision designed. The reverse spiral groove of the socket is designed to bite and provide maximum grip. The more you turn, th....
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)

  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock