ReviewsMulti axis Machine

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Linear Stage Actuator 200mm Manual Sliding Table Ballscrew 1605 Linear Guides Cross Slide Table SFU1605 Travel Length L100/200/300/400/500/600mm (200mm)

  • Rounded front and rear plate design, precision hole position processing..
  • Stroke: 100mm/200mm/300mm/400mm/500mm/600mm(optional).
  • Sliding table height: 66mm, width: 93mm, floor thickness: 11mm.
  • The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

uxcell LM6UU Linear Ball Bearings 6mm Bore 12mm OD 19mm Length for CNC Machine 3D Printer 4pcs

  • SK20 Aluminum Linear Motion Rail Clamping Guide Support.
  • Made of Aluminum material, corrosion resistance and long life..
  • Low friction resistance can get high precision rotating in the smooth movement..
  • Widely used in multi-axis machine, installed the sliding parts such as industrial machinery..
Check Stock

Panasonic LUMIX GX9 4K Mirrorless ILC Camera Body with 12-60mm F3.5-5.6 Power O.I.S. Lens, DC-GX9MK (USA Black)

  • 20.3 MP high resolution MOS Sensor with Tuned 3 Dimensional Color Control to detect hue, saturation and brightness for optimal results.
  • 5 Axis Dual I.S. combines an O.I.S. (Optical Image Stabilizer, 2 axis) and an I.B.I.S. (In Body Image Stabilization, 5 axis).
  • 5 axis Dual I.S. enables up to 4 stop slower shutter speeds.
  • Live View Finder 2760k dot high resolution LFV tilts up by approx. 80 degrees with nearly 100% color reproduction.
  • 1. 39x / 0. 7x (35mm camera equiv.) magnification and 100% field of view.
  • 49 Focus Points plus Custom Multi AF mode quickly and freely select focus blocks from via the touch enabled LCD screen.
  • [4K Technology] 4K 30p video, 4K Live Crop and 4K PHOTO burst with a new Light Composition mode to capture perfect moments.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Electric Linear Rail Guide 200mm Ballscrew 1605 Slide Stage Load 250kg Nema23 Motor Base for DIY CNC Z Axis

  • Stork:200mm/8” 400mm/16” 600mm/24” 800mm/32”.
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm).
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
Check Stock

Digi-Pas 2-AXIS ULTRA-Precision Digital Level 1-acrsec (0.005mm/M), Inclinometer, DWL8500XY + PRO Software (NIST-Traceable)

  • Digi-Pas 2-AXIS, ULTRA-Precision, Wireless, Digital Level/Inclinometer, REVOLUTIONIZE precision alignments by SIMULTANEOUSLY display both X&Y axis level states WIRELESSLY on your Smartphone, Tablet and PC screen while you are adjusting machine footings. This allows with ONE-MAN operation, thus completely eliminates using 2 units of single-axis levels, with TWO-MEN operation as experienced on Old-fashioned Spirit level or single-axis inclinometer..
  • Tedious repetition on going ‘back-and-forth’ checking 'bubble' level position in-between tiny graduation lines is NOW THINGS OF THE PAST. Digi-Pas SMART LEVEL greatly CUT-DOWN precision alignment TIME (by >70%) and in combine with one-man operability allow GREAT COST SAVING as well as improve QUALITY of installation, setup & maintenance of large-sized CNC machines, XY-Table Ball-Screw STRAIGHTNESS & SURFACE FLATNESS and equipment requiring delicate alignments or sensitive to vibration..
  • Real-time MONITORING and LOGGING (save in Excel) on leveling states, planar angles, 3D straightness/surface-flatness profiling and VIBRATION amplitudes. ANALYSIS on both static & dynamic positional stability....
Check Stock

2 Axis DRO Digital Readout for Milling Lathe Machine with Precision Linear Scale 950 250

  • NOTE：This kit includes 2 pieces 5 micron linear scale and 1 pieces 2 axis DRO . It is compete dro kits with parts to fit mounting.The linear scale has to be chosen from 50-1000mm travel length..
  • The default travel length is 950mm and 250mm. If you want other length, please contact us.
  • This is a mutlifunctional 2 axis DRO may be used on lathe machine, mill machine and other machines..
Check Stock

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

  • ...which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
  • Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to avoid deformation and discoloration caused by high laser temperature, and powerful airflow to blow away the residue, ensure clean surface and smooth cutting edge, speeding up the cutting process....
Check Stock

YEEZUGO Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill Heavy Size

  • The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine..
  • It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee....
  • Table size: 365 × 200 mm. Weight: 6.8 kg.
  • X axis distance is 180 mm. Y axis distance is 50 mm. Hand Wheel Scale Per Ring is 3 mm..
Check Stock

All in one Gimbal Stabilizer - 3-Axis Gimbal Stabilizer for Smartphone Compact Cameras Action Camera with 600° Inception Mode Stabilizer Ideal for Vlogging Live Video YouTube - iSteady Multi

  • 【All in one Gimbal】3-Axis Gimbal Stabilizer easily fits action cameras GoPro Hero9, almost all kinds of mobile phones in the market, like iPhone....
  • 【Real-tech Gear with 6 Working Modes】With these modes, Multi Gimbal stabilizer transforms plain & shaky videos into smooth, professional &....
  • 【First Choice for Sony Compact Cameras】Are you a Sony-fanciers? Never miss hohem iSteady Multi! Equipped with an exclusive cable ONLY for Sony....
  • 【Fantastic 600° 3D Inception Mode】Be an amateur or an auteur? All you need is a hohem iSteady multi-3-axis gimbal stabilizer with ultimate 600°....
  • 【Infinite & Beyond Creativity with Upgraded "Hohem Gimbal" App】The upgraded Hohem Gimbal app is icing on the cake! With a long battery life of 8....
Check Stock