ReviewsMulti function Power Meter

Digital Clamp Meter Multimeter AP-7200A True RMS Clamp Multimeter 1999 Counts for Measure DC AC Voltage Current Resistance Diode Test with NCV Continuity Buzzer Data Hold Backlight

  • 【True RMS Clamp Multimeter】The AC voltage and current measurement of AP-7200A clamp meter is true RMS measurement, which is more accurate for....
  • 【Non Contact Voltage Detection (NCV)】With the NCV function of AP-7200A multimeter, you can easily detect and know if there is electricity in the....
  • 【Multi-function Auto Range Clamp Meter】This portable clamp meter supports auto ranging, flashlight, function selection dial, data hold, Max/Min....
  • 【Wide Applications】The clamp tester is compact, easy to operate, convenient to carry and low power consumption. It is ideal to be used in car....
  • 【100% Satisfied After-Sales】AOPUTTRIVER provides 2 years product warranty and lifetime tech supports. Please don’t be hesitate to contact us if....
Check Stock

GODOX TT350C TTL GN36 Camera Speedlite for Canon Digital Camera (TT350C)

  • Built-in Godox X System: With a compact body,30 meters further transmission..
  • Master Slave Flash: As a meter unit,TT350 series can control the slave unit models: AD600,AD600M,AD360II,AD200. As a slave unit,TT350 series can be controlled the master unit model: X1, V860II, V850II, TT685, TT600..
  • Full TTL Functions: Supports HSS(max. 1/8000s),front rear curtain sync,FEC,multi flash,manual flash,etc..
  • Convenient LCD Panel: With LCD panel to offer clear and easy operation. Use 4 function buttons to change various setting according to different situations. Turn the select dial to choose the amount of the settings..
  • Withstanding Overheat and Useful Functions: GN36 (m ISO 100,@105mm),22 steps of power output(1/1~1/128). Approx. 0.1-2.2s recycle time,210 full power flashes (using 2500mA Ni-MH batteries). Support TTL/M/Multi/S1/S2 modes,24-105mm auto/manual zooming. With C.Fn custom function settings..
Check Stock

AMTAST Digital Coffee Densitometer Coffee Concentration Refractometer Sugar Drinks Density Coffee Brix TDS Meter AMR300

  • Function: Coffee concentration with range of 0-25%.
  • Provide with suction tube and spare protective cover. The function keys are clear and easy to operate. Digital screen with large number, battery power can be displayed..
  • Temperature unit converting: Press key “SCALE” more than 2 seconds, meter will display Celsius or Fahrenheit..
  • Calibration: No need calibration every time. Drip 3~5 drops distilled water in sample plate, make sure the water and meter temperature is same and standard temperature is 20ºC, then cover it. Press key “CAL” more than 2 seconds until “CAL” flashing, press “CAL” key again, meter will display “END” and show 0.0%..
  • Power off: Meter will power off within one minute if no any operation..
Check Stock

Hioki 3280-10F - AC Current Clamp Meter with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability

  • ...DC current, AC / DC voltage, resistance, capacitance, Continuity, temperature, diode and frequency (Hz).
  • The Clamp Meter has VFD and LoZ modes, which can provide higher accuracy readings.A perfect troubleshooting tool that will help you solve electrical problems in the car or at home quickly and safely..
  • ✅【Multi-Function】Digtal backlit LCD display - LED Flashlight, Temperature Measurement for liquids and air conditioning ports, Low Battery Indication, Data Hold, True-RMS, ZERO, Automatic range, SEL fuction, Auto power off after 10 minutes inactivity, Non-Contact AC Voltage Detection,full-range overload protection, 2*1.5VAAA batteries already included..
  • ✅【Easy to read】The AC/DC clamp meter has a backlit screen and led flashlight so you can see the readings when working in dim or low-light conditions,like electrical closets, under buildings, behind appliances, and in other enclosed spaces,Convenient LED flashlight illuminates a dimly lit area..
  • ✅【NCV Defection Function】Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.The NCV non-contact AC voltage detection function can be switched by short pressing the NCV button in any gear..
  • ✅【Safety First& Customer Service】 IEC Rated CAT.III 600V, CE....
Check Stock

Plug-in Kilowatt Electricity Usage Monitor Electrical Power Consumption Watt Meter Tester

  • 【Electricity Usage Monitor, Extension Cord】you can virtually monitor standby or working power dissipation of all your electronics. Monitor which appliances are the high cost of energy. save energy, money, Reduce CO₂emissions, environmental friendly,etc.electrical usage monitor.
  • 【Upgrade Blue Backlit LCD Display】The digital large backlit LCD display screen is 180° full wide view clear visible, make you easy to read and record the data, especially in the darkness.power consumption meter.
  • 【Overload Protection】 When the whole power exceeds the rated power 1650W of monitor, LCD will display.watt plug meter.
  • 【Various Parameters Measurement】CO₂ Emissions(CO₂/KG), Power(W), Energy (KWh), Voltage/Hertz, Amps/Hertz, Power Factor, Minimum power and Maximum power, 8 modes for your choice.kilowatt meter.
  • 【Data Hold Function】Electricity Usage Monitor will save the last datas when you remove the appliance from power meter or remove the power meter from the socket.
  • If you're not satisfied with it, please feel free to contact, We take full responsibility for product quality.plug in amp meter.
Check Stock

Olmlmo Emf Meter,Ghost Hunting Equipment,Radiation Detector,Digital Electromagnetic Field Radiation Detector Digital LCD Emf Detector,Tester for Home Emf Inspections, Office,Outdoor and Ghost Hunting

  • the emf meter’s screen will turn yellow and the indicator will be flashing when it’s detecting between 4-40 mG, red if it’s reading more then 40 mG.A sound alarm will give you the same data in higher sound frequencies, which you can also disable.
  • Multi-function & Power Saving: Our emf detector ghost hunting testing average or peak value(Maximum) reading, and one bottom hold the data for a view. This ghost hunting equipment has large -light LCD is clear for viewing. Olmlmo EMF meter will power off after 15 minutes without operation.
  • Widely Applications: The EMF meter is suitable for testing TV, computer, printer, microwave oven, refrigerators, cell towers, wire towers, low-frequency home appliances, ghost hunting, etc.
  • This EMF Detector can help eliminate radiation risks that potentially harm your family’s health.
  • Service: 1 * EMF Meter, 1 * Battery, and 1 * User manual.
  • We provide 3 years of after-sale service. If you have any questions, please feel free to contact us, we will serve you wholeheartedly.
Check Stock

AUTENS AC Digital Meter AC 80-260V 100A Current Voltage Power Energy Panel Monitor (AC 100A Meter with Split Core CT)

  • MULTIFUNCTIONAL DIGITAL MULTIMETER: With a large-screen LCD display interface, it can display six parameters at the same time, including Voltage Current Active Power Energy Frequency and Power factor at the same time. Measuring Voltage range AC 80V-260V.
  • Power Factor range 0-1PF. It will be more convenient to install with a split current transformer..
  • OVERLOAD ALARM FUNCTION: Backlight and power will flash simultaneously to give an alarm if active power value exceeds the preset value. Alarm value can be set by yourself, but applied load should not exceed the rated power. This AC digital meter is suitable for indoor, please do not use outdoor..
  • POWER-OFF DATA STORAGE FUNCTION: The last test data is stored automatically when the power supply abruptly lose. No More worry about data loss due to sudden power outages. This digital meter can only measure the Active Power but not Apparent Power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE, or the meter can be burnt or melted..
  • ONE-BUTTON CONTROL: The button can be used to control the backlight, reset energy and preset power alarm limit. Short press the key to turn on or off the backli....
Check Stock

GODOX TT350N TTL Camera Flash for Nikon Cameras GN36 1/8000s HSS Mini Speedlight

  • Built-in Godox X system: compact body, 30m transmission distance, experience convenient operation..
  • Master Slave Flash: As a meter unit,TT350N can control the slave unit models: AD600,AD600M,AD360II-C,AD360II-N,V860IIN,V850II,TT685N,TT600. As a slave unit,TT350 can be controlled the master unit models: X1T,V860II.
  • Full TTL Functions: Supports HSS(max. 1/8000s),front rear curtain sync,FEC,multi flash,manual flash,etc. Note: Does not work in TTL mode with the Z7II, Z6II, Z5 and so on..
  • Convenient LCD Panel: With LCD panel to offer clear and easy operation. Use 4 function buttons to change various setting according to different situations. Turn the select dial to choose the amount of the settings..
  • Withstanding Overheat and Useful Functions: GN36 (m ISO 100,@105mm),22 steps of power output(1/1~1/128). Approx. 0.1-2.2s recycle time,210 full power flashes (using 2500mA Ni-MH batteries). Support TTL/M/Multi/S1/S2 modes,24-105mm auto/manual zooming. With C.Fn custom function settings..
Check Stock

KAIWEETS HT206B Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC Clamp Meter)

  • ...LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Defection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36-Month product service provided. 7/24 Customer Service..
Check Stock

Huanyu Hay Moisture Meter TK100 Multifunctional Fibre Moisture Meter 0-80% Probe Humidity Tester Portable Water Content Analyzer for Tea Corn Straw Bran Soybean Meal Grains Chinese medicine

  • MULTI-FUNCTION: The newly designed moisture meter with extensive probes suits to many materials moisture content testing, just as Wood Fiber, grains, Hay,Straw, Bran, Chinese traditional medicine and other FIBRE materials. With a wide working range, the probe-type sensor can be deeply measured inside the material..
  • AUTOMATIC COMPENSATION: Adopt temperature and humidity compensation technology and realize through resistance operation, with higher measurement accuracy and better stability..
  • QUICK MEASUREMENT: The moisture meter TK100 can replace the traditional oven method, using the relationship between moisture content and resistance to effectively, quickly and accurately measure the moisture content. The whole moisture determination process takes less than 1 minute and immediately displays the measured value, which greatly saves the precious time of the inspectors..
  • LIGHT WEIGHT&LCD DISPLAY: Small size, light weight, strong anti-interference performance, can be carried on the spot for quick detection. Backlit LCD display technology, clear display and low power consumption..
  • MORE OUTSTANDING FEATURES: 1.Alarm function, maximum value hold.
  • 2.Automatic shutdown and power saving function.
  • 3.Customizable RS232/RS485/USB/Bluetooth data transmission..
Check Stock

Pyle Bluetooth Hybrid Amplifier Receiver - Home Theater Pre-Amplifier with Wireless Streaming Ability, MP3/USB/SD/AUX/FM Radio (3000 Watt)

  • 3000 Watt power: The multi channel Pyle Bluetooth stereo amplifier Receiver is perfect for your home entertainment system. Gives you 3000 Watts peak power to be used for multi speakers w/ 2-8 ohms impedance, lets you enjoy high quality amplified audio.
  • Bluetooth compatible: The professional integrated stereo receiver is equipped with Bluetooth wireless music streaming. Works with today’s latest devices including smartphones, iPhone, iPad, laptops and computers with hassle free receiver pairing.
  • 7 inputs: The home amplifier with Bluetooth digital amp Box supports headphone, USB, SD, MP3, FM tuner, aux, CD Player, 2 microphones input w/ echo for karaoke or event hosting, recline, 1 RCA preamp output and dual mono RCA dedicated for subwoofer.
  • Eq controls: the home theater system receiver has crisp buttons for the audio sources and selector, rotary knob for equalization and master volume adjustments. It also features blue LED lights which brightness can be adjusted through the LED dimmer.
  • Display meter: The improved compact amplifier has a built in digital fluorescent output display meter that displays all the functions and input used. Remote control for distant audio adjustments and rack mount brackets are included in the package.
Check Stock