ReviewsMulti layer Fpc Pcb

CableCC Micro SIM Card to Nano SIM Kit Male to Female Extension Soft Flat FPC Cable Extender 10cm

Micro SIM Card to Nano SIM Kit Male to Female Extension Soft Flat FPC Cable Extender 10cm.
You can extend the Nano SIMcard from inside to outside Micro SIM for the mobile & Tablet.

You can extend the Nano SIM card from inside to outside Micro SIM for the mobile & Tablet.
Micro SIM Card to Nano SIM Kit Male to Female.
Extension Soft Flat FPC Cable Extender 10cm.

【Dimension】 -Size：100mmx75mm/3.94"x2.95"(L*W).
【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers isdouble sided.
【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.

Standard SD SDHC Memory Card Kit Male to SD Female Extension Soft Flat FPC Cable Extender 25cm.
You can extend the SD card slot from inside to outside.
And Then connect the SD card for the mobile & Tablet.
Soft Flat FPC Cable,Length: 25cm Approx..

Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..

please be advised, you have to drill a hole on your front door before installation.it is not wireless, and do not support external memory card..
Step 1: According to the door thickness to choose a suitable screw, then turn the screw into the screw hole on the barrel of outdoor unit..
Step 2: Insert the barrel together with the FPC through the door peephole, then hold the outdoor part on door in right direction..
Step 3: Take out the metal bracket (the "UP" arrow on the bracket means upward), the FPC pass through the rectangular hole, the screw pass through the round hole of the metal bracket, then to lock the metal bracket with outdoor part tightly..
Step 4: Connect the FPC from outdoor unit to the connector of the indoor unit in right direction.Step 5: The four slots on the back of indoor unit is aligned with four hooks on the metal bracket and buckle up, then pull down indoor unit to lock tightly. Done!.

Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.

This is a beautiful electronic hourglass that is fun to build and nice to look at when finished, it is not only a PCB board for practicing welding....
Comes with English user manual and online PDF file, which will guide you how to finish step by step, perfect for school basic electronics experiment....
The suite adopts double layer PCB, and the circuit consists of 30 pieces white LED blue ray..
Under the control of MCU program, it displays analog hourglass image..

F550 is a multi-rotor designed for all pilots for fun or AP..
Using high strength compound PCB frame board, which makes wiring of ESCs and battery more easily..
Made by advanced engineering material, super strong & smooth Kit.
It can be applied for entertainment, aerial photography, FPV and other activities..
New design PCB board special for F550,support standard flight controller like MK, KK, FF, MWC, APM.

INCLUDES Pad that comes with Fisher-Price Deluxe Space-Saver High-Chair.
PERFECT Shape and Fitting for your Fisher-Price Deluxe Space-Saver High-Chair - Item # FPC43.
AUTHENTIC REPLACEMENT PARTS come in a sealed plastic bag - as received from Manufacturer.
MADE FOR MODEL NUMBER FPC43 - Fisher-Price Deluxe Space-Saver High-Chair.

...e and programmable Fn layers (FN+BACKSPACE). It also comes with a range of standard RGB effects, which you can easily switch between using simple shortcuts..
【Bluetooth 5.0/2.4GHz/Type-C Wired Triple Modes Available】EPOMAKER Theory TH68 65% mechanical keyboard features multi-modes connection to provide free switch between different devices. No more plug in and out processes. Bluetooth 5.0 and 2.4GHz offer fast and stable transmission without latency while included Type-C cable provides solid connection as a backup when the battery is out. It’s compatible with Mac/Win/Android system. It is N-key rollover in all modes, limitless as expected.
【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】TH68 keyboard is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX switches and its clones.
【Bottom Mesh Structure RGB Light&Side RGB Light】RGB backlight is always considered as one of the important elements for mechanical keyboards thus Theory....