ReviewsNa2s xh2o
GDSTIME 92mm x 92mm x 25mm 12V Dual Ball Bearings Brushless Cooling Fan
- Package included: 1 Piece fan include fan grill and mounting screws & nuts.
- Dimensions: 92mm(L) x 92mm(W) x 25mm(H) / 3.62in(L) x 3.62in(W) x 0.98in(H).
- Life: working up to 50000h at 25 degrees..
- (-): Black wire. This is a two wire cooling fan..
GDSTIME 75mm x 30mm 7530 DC 12 Volt Brushless Turbo Blower Cooling Fan
- Package include: 1 piece fan include mounting screws & nuts..
- Dimensions: 75mm(L) x 73mm(W) x 30mm(H) / 2.95” x2.87”x1.18”(L*W*H).
- The wide of inlet is 48mm / 1.9in; The Length of outlet is 36.5mm / 1.44in ±0.3.
- The Wide of outlet is 24.7mm / 0.97in ±0.3.
- (-): Black. This is a two wire dc blower fan..
Wathai 40mm x 20mm DC Brushless Cooling Blower Fan 24V 2Pin 2 Pcs
- widely used in humidifier, aromatherapy and other small appliances series.
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
- Warranty: One-year quality assurance. Please contact us If the product has any quality problems, it will be replaced within one year..
- Dimension: 40mm(L) x 40mm(W) x 20mm(H) / 1.55x1.55x0.78 in. per fan.
GDSTIME 60mm x 60mm x 15mm 5V 2PIN DC Brushless Cooling Fan
- Dimension of outer the frame is 60mm(L) x 60mm(W) x 15mm(H) / The size of fan in inch is 2.36in(L) x 2.36in(W) x 0.59in(H).
- Operating Voltage Range:4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.).
- Life: working up to 35000h at 25 degrees..
Propel X01 Micro Drone USB Battery Charger Maximum Rooftop pl-1390
- The USB plug can be connected to the computer, mobile phone charger, mobile power supply for battery charging, easy to use..
- Can be used with XH2.54 revolving JST bus conversion cable, and it can charge 3.7V lithium battery through JST plug, which is more widely used..
- The 3.7V lithium battery can be accurately charged, and it will automatically stop charging after being fully charged without overcharging..
- Safe to use, just connect the USB cable to the device to charge normally without monitoring..
- Small size, easy to carry, allowing to charge the battery anytime and anywhere, suitable for X5C, 818a, X1, X4, HS170, X300, X400, F181, F180 quadcopter, etc..
HysiPrui 24V 5015 Fan Blower Turbo Cooling Fan 50x50X15mm 120CM Removable Cable for 3D Printer Extruder Fan
- REMOVABLE: Each fan is divided into two parts, cable length is 100cm and 20cm.
- EASY TO REPLACe: When the fan is broken, you can just replace it and no need to disassemble the other part.
- WEIGHT AND VOLTAGE: about 60g. Operation Voltage: DC 24V.
- CONNECTORS: Middle connector is red JST connector. Motherboard side is XH2.54 2 Pin.
- KINDLY NOTE: Please do not use one part (of the fan) from our store, the other part from other store..
GDSTIME 140mm x 38mm 12V Dual Ball Bearings Brushless Dc Cooling Fan
- Dimension of outer the frame is 140mm(L) x 140mm(W) x 38mm(H) / The size of fan in inch is 5.51in(L) x 5.51in(W) x 1.5in(H).
- Center to Center of hole distance is 125mm / 4.92in..
- There are two fan blades. one is actually fixed. It’s function is increase air pressure..
- (-): Black wire. This is a two wire cooling fan.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase..
20pcs Zero Delay USB Encoder 2 Pin Wire Harness with 0.187 inch 4.8mm Terminal for Arcade HAPP Push Button / Arcade Stick
- 20pcs 2 pin cables with 0.187" 4.8mm crimp terminals.
- Perfect Cable for Zero Delay USB Encoders / happ push button / joysticks.
- One side is JST XH2.45 Male Connection plug, the other side is 0.187 inch terminals plug for arcade buttons / arcade joysticks..
- Perfect fit for Arcade Buttons and Arcade Joysticks, Widely used in Arcade Game Machines, Arcade Game Console, Arcade Game Controller DIY Projects..
GDSTIME 24V 50mm 20mm 50x50x20mm DC Brushless Blower Cooling Fan
- Dimension of outer the frame is 50mm(L) x 50mm(W) x 20mm(H) / The size of fan in inch is 1.97in(L) x 1.97in(W) x 0.78in(H).
- Operating Voltage Range:14V to 27.6V. (overtake to 27.6V, it can also work. but not safe, and seriously affects lifespan of fan.).
- The wide of inlet is 34mm / 1.34in; The Length of outlet is 22mm / 0.87.
Wathai 120mm x 25mm Brushless DC Cooler Case Cooling Fan 12V 2Pin 2 Pack
- Dimension: 120mm(L) x 120mm(W) x 25mm(H) / 4.72x4.72x1 in. per fan;Connecter: XH2.54-2Pin.
- Noise:28dBA;Bearing type: Sleeve Bearing.
- Warranty: One-year quality assurance. Please contact us If the product has any quality problems, it will be replaced within one year..
- Perfect for amplifier , RV refrigerator, drive tower, dehumidifier, TV refrigerator, space heater, grow tent, wine cooler, electric boat , portable....
- 2 Piece fan include fan grill and mounting screws & nuts.
- Be aware that the fan come with grill. No need to waste money on additional grill..
Jst Crimping Tool,Zhushan SN-2549 AWG28-18 Dupont Crimper PH2.54/Dupont 2.54/2.8/3.0/3.96/4.8/KF2510/JST Terminal
- 【Crimping Range】Suitable for AWG 28-18 (0.08-0.5/0.25/0.5/1.0mm²).Compatible with XH2.54/dupont2.54/2.8/3.0/3.96/4.8/KF2510/JST terminal.
- 【Perfect Workmanship】Wire Electrical Discharge Machining Cutting jaws with perfect polishing.
- 【High Quality Material】The components of the ratchet crimping tool are made of special steel.
- 【Product Feature】Precision crimping dies and integral locking, automatic release.
- 【After-Sales Service】Please read the description and the specifications before you purchase. We offer 12 months money back guarantee.