ReviewsNarrow Opening Clamp

Pony 8510BP Cabinet Claw, 2-Pack

  • The Cabinet Claw Is An Unique Tool Which Combines The Multiple Steps Of Face Frame Cabinet Installation Into One Easy Process.
  • Clamp Specifications: Works On Stiles From 1-1/2 Inch To 2 Inch.
  • Minimum Opening: 2-Inch, Maximum Opening Capacity: 4-7/16 Inch.
  • Easy Use To Install And Highly Durable. Protective Pads Protect Cabinets From Becoming Marred During Installation.
  • Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened While The Clamp Remains In Its Original Position.
  • A unique tool which combines the multiple steps of face frame cabinet installation into one easy process.
  • Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position.
  • Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps..
  • Protective pads protect cabinets from becoming marred during installation.
  • Installs two stiles from 1-1/2 inch to 2 inch width and up to 1-1/2 inch thickness (each) with 4 inch opening capacity.
Check Stock

Jorgensen 6 Spreader/Bar Clamp Set 4-pack,One-Hand Light Duty E-Z Hold Clamp/Spreader 99216A

  • Basic Parameter - Throat Depth : 2-3/8” from bar top of pad.
  • Normal load limit: 150 lbs. Bar: 1/8”*1/2” plated, round-edge, high-carbon steel.
  • Light-duty E-Z hold design - the E-Z hold design allows clamp to be used in two ways - clamp or spreader. Not only can these versatile Clamps can be easily converted into a spreader Clamps, feature our exclusive patented feature that allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single Clamp.
  • One-handed Clamp - as a standard, quick-acting Clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides Comfort and ease of the use, permits greater travel per squeeze.
  • Features - these bar clamps combine the speed and ease of single-handed use. With 2-3/8 inch reach and furnished with soft and durable plastic pads.
Check Stock

One Speaker Setup

  • UNIVERSAL UNDER DESK DESIGN clamps on to desks up to 40mm thick and as narrow as 8mm for a near universal fit on most desks || Spring Clamp is easy to remove and reattach! Headphone Hook for birthday gifts.
  • ROTATING ADJUSTABLE HEADPHONE ARM swings underneath your desk for discreet & non-intrusive storage and swings back out for easy access..
  • BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs..
  • SOFT RUBBER PADS located on both clamp ends protect your desk or table from damage || Protects glass, woden & metal desks/tables from damage!.
  • Under Desk Mount for Convenient Storage. Springed C Clamp, Easy Installation..
Check Stock

5 Pcs Lab Clamp Retort Prong Jaw 2 Finger 10-50mm Adjustment，Rubber Jaws Labs Universal Clamp (5)

  • Rubber-Wrapped jaws can well protect your glassware from scratching bad.
  • 2 round jaws lab clamp with wing nut, Opening Range: 10-50mm.
  • 2 Finger Adjustment Lab Clamp ideal for laboratory,Perfect for test tubes, burettes, or flasks and any Universal Clamp.
  • 2 finger style rubber-wrapped head lab clamp Used for beaker clamp, test tube clamp, burette clamp, condenser tube clamp..
  • Labs Universal Clamp Holds Irregular Shapes Easily.
Check Stock

Park Tool PRS-2.3-2 Deluxe Double Arm Repair Stand with 100-3D Micro-Adjust Clamps

  • The PRS-2.3-2 features our 100-3D Micro-Adjust Clamps, with narrow clamping jaws and a dual-stage cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size.
  • Maximum weight capacity: 120 lbs. (54 kg).
  • Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes.
  • Clamp jaws are nominally 2.75" (70 mm) wide.
  • Clamp height: adjustable from 50" to 62" (128–158 cm).
Check Stock

Jorgensen 6\ One Hand Clamp/Spreader, 300 Lbs Clamping Force, E-Z Hold Bar Clamps Set, Medium Duty, 2-pack

  • The throat depth is 3-3/8 inch, the maximum opening capacity is 6 inch and the normal load limit is 300 lbs..
  • High-carbon steel bar and glass-filled nylon handle make it strong and durable. The contoured comfort grip and quick-release lever make it simple to get a firm grasp. Deep-reach pads help protect your work..
  • The E-Z hold design allows clamp to be used in two ways-clamp or spreader. And the exclusive patented feature lets you join two clamps together to create a clamp with more than double the opening capacity of a single clamp with no tools or added accessories needed..
  • As a standard, quick-acting clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides comfort and ease of the use, permits greater travel per squeeze..
  • Suitable for a wide range of woodworking & DIY projects..
Check Stock

Feedback Sports Ultralight Bike Repair Stand Red

  • Clamp features Slide-Lock ratchet for quick closure and Amplifying Clutch for precision clamping pressure.
  • 360° rotating clamp design provides easy access to any part of your bicycle.
  • Frame clamp adjusts from 35.5″-57.5″ (90-145cm) in height.
  • oriented vertical, horizontal, and everything in-between.
  • Rubber-coated clamp secures and protects expensive components and beautifully painted frames.
  • Clamp opening up to 1.9″ (4.8cm) accommodates large diameter frame tubes.
Check Stock

6 Piece C Clamps Set. 1/2/3/4/5/6-Inch,C Clamp, C Clamps Heavy Duty (1\2\3\4\5\6\)

  • Data: 1 in C clamp: 0.8 inch jaw opening and 0.7 inch throat depth.
  • 2 in C clamp: 2 inch jaw opening and 1.5 in throat depth.
  • 3 in C clamp: 3 in jaw and 2.3 in throat depth.
  • 4-in C-clamp: 4.5 in jaw and 2.7 in throat depth.
  • 5-in C-clamp: 5 in jaw and 3 in throat depth.
  • 6-in C-clamp: 6.2 in jaw and 3.3 in throat depth.
  • High-grade materials: The C clamp is made of cast aluminum and hardened high-carbon steel alloy. The movable parts are made of precision milled heat-treated chromium plate carbon, which will not deform even under high pressure. Steel provides reliability and corrosion resistance..
  • Wide range of applications: C-type clamps are powerful and versatile, and can fix parts for assembly, fastening, bonding and welding. Widely used in furniture manufacturing, metalworking and automotive applications, this reliable tool can ensure that everything is in the right place..
  • Easy to use: The thread on the screw allows it to slide smoothly without sticking or binding. The floating jaw pad maintains uniform contact with the work surface when pressure is applied. The sliding handle bar provides multiple hand positions for the best leverage and the most comfortable grip..
  • Flexible choice: 6 pieces of C-clamps can meet the selection of any processing size, a....
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • ..., 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy carrying. The pliers at different angles help to get into narrow places and save time..
Check Stock

XtremepowerUS 5 Ton 2 Way Auto Body Clamp for Top & Straight Repair Tool Kit Self-Tightening Frame Pull Clamp Grips

  • Two-Way Pull Operation - The auto body repair pull clamp is compact, lightweight & exquisitely crafted, allows for two-way (Top & Straight) pull operation, capacity up to 5 tons (Straight Pulling) and 3 tons (top pulling).
  • Easy and Simple to Use - Self-tightening serrated jaws allow for a positive grip, both sides jaws with reasonable designed, which are different in order to fit the confined room.
  • Labor Saving Pull Clamp - The 2 Way self-tightening pull clamp can achieve a positive grip, and drop forged construction provides more pulling power, making it time and labor saving in the process of body repair for automotive car vehicle.
  • Heavy Duty Construction - Made of premium steel for high strength and durability, ensures long last using, this 5 ton 2 way pull clamp is specially designed for car body repair, especially use in narrow place.
  • Ideal Pull Clamp - Self-Tightening. The 2-way clamp will grabs minimum 1-1/2" of metal, making it ideal for hard pulls on heavy metal or frame.
Check Stock

WAOWAO Narrow Baby Gate Easy Walk Thru Pressure/Hardware Mount Auto Close White Metal Child Dog Pet Safety Gates 29.13in Tall for Top of Stairs,Doorways,Kitchen and Living Room 22.83-25.59 in

  • Easy to install Our safety 24 in baby gate comes with 4 adjustable pressure bolts, which is very easy for quick installation: no tools required, no need drilling holes and no damage to your house wall.Small opening 26 in baby gate can also quickly be removed out of the opening for easy storage.22.83-25.59 in baby gate also supports hardware installation (come with 4 pack wall cups), suitable for the top of stairs..
  • Unique design 17.44 in ultra-wide revolving door for easy walk through.1.85 in ultra narrow gate spacing, prevent accidental pinches and effectively preventing pets from passing.The 24 inch baby gate with door makes from sleek steel,which is larger diameter and more durable. Makes the narrow baby gate enough sturdy to bear the impact of 180 pounds!.
  • Multi UseSafety gate for stairs, doorways and Hallways to stop babies,child or pets climb over. Fits narrow openings from 22.83 inch to 25.59 inch,please measure the opening size before purchasing. Tips: before installation there will be a gap between the gate latch and the frame which is NOT a defect and it is NOT bent. This gap will be eliminated once installed..
  • Double-sided Auto CloseWhite Pressure mounted baby gate will closes automatically when handle released, open from both sides.The narro....
Check Stock