ReviewsNato Rail Handle

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

...he cage is made of premium aluminum alloy, with matte surface and strong oxygen resistance..
【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support..
【SWEET DESIGN】Strap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..

Check Stock

NICEYRIG Cage for Canon 5D 5DS Mark IV III II Full DSLR Camera Cage with QR Plate for Arca Swiss and NATO Rail Cold Shoe - 267

[COMPABILITY] Niceyrig cage 267 is especially designed for Canon 5Ds 5D Mark IV III II to protect your camera body without obstructing any buttons and....
[MULTI MOUNTING POINTS] Plenty of 1/4’’-20 and 3/8’’-16 threaded holes and cold shoe on the top to allow kinds of accessories like top handle,....
[QUICK SWITCH] Built-in QR plates for Arca Swiss on the bottom and left side, you can quickly achieve attach and release, which allows you transfer....
[SUPPORT NATO ACCESSORIES] Features NATO rail on the right side that enable you to mount quick release accessories with NATO clamp, such as Niceyrig....
[SOLID QUALITY] Made of aluminum alloy, sturdy and lightweight.

Check Stock

ALZO Smoothy Zoom Focus Assist - works like follow focus - adapts to many different camera lens

【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super Clamp Mount 1124 to improve the compactness of your equipment..
【MULTIPLE SHOOTING SCENES】The installation angle of this follow focus can be adjusted, supports handheld, tripod mounted and other shooting scenarios. Furthermore, using the included snap-on gear ring belt and interchangeable M0.8 gears (standard M0.8-43T gear, optional model: M0.8-65T gear 3200, M0.8-38T gear 3285) enables well compatible with different diameters of lenses and achieves diversified shooting..
【Additional Gears】You could choose additional gears to help achieve a better shooting experience: SmallRig Seamless Focus Gear Ring 3291/3292/3293/3294/9295/3296.

Check Stock

NATO Handbook

Extensive Compatibility : Dual ball heads with magic arm features for NATO Clamp and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, etc..
Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and NATO Rail or with a 1/4" threaded hole and NATO Rail..
360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels..
12Ib Payload : The max load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20 mm) in diameter. This item weighs only 0.2 Ib (91g) , making it easy to carry around and store..
Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching..

Check Stock

Heavy Duty Flag of NATO 3x5 Ft,Longest Lasting Nylon 210D|Embroidered Compass Rose Four Rows Stitching Fly Ends|North Atlantic Treaty Org Flags Decoration Gift Yard House Alliance Banner

Compatibility: SmallRig NATO Top Handle 3766 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for any accessories features NATO Rail, can be quickly mounted on the side of the cage via a NATO clamp.
Lightweight Only 124g: Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone.
5 Built-in Cold Shoe Mounts: It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories.
Mounting Points: SmallRig Camera Grip has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble.
Related Products: 3/8"-16 locating holes for ARRI standard support Monitor Mount 2903, 2348 to attach monitors.
1/4"-20 threaded holes support Magic Arm 2070 for monitors.

Check Stock

NICEYRIG Camera Cage Kit for Sony A7RIII/ A7RIV/ A7IV/ A7III/ A7SIII/ A7RII/ A7SII/ A7II/ A9, with Cheese Top Handle and Cable Lock Clamp - 190

This light weight cage is compatible with A7 IV, III, II series to protect camera damaging. SD card slot, battery compartment, and all camera controls are accessed..
The built-in cold shoe on the top allows to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc. Rosette at right side is provided to mount compatible with ARRI rosette handgrip for handheld shooting..
HDMI clamp in the upper left corner to organize your HDMI cable. HDMI lock mounting interface to protect the camera HDMI port. A NATO rail is at left side. It is designed to mount nato handle and other NATO compatible accessories quick release. The plate at the bottom of the cage enables you to attach an optional Raiser Block applicable arca swiss compatible with manfrotto plate..
This DSLR camera cheese top handle comes with standard cold shoe, which bases on the top to mount magic arm, camera monitor, flash light, led light, dslr microphone, wireless gear, EVF mount. Plenty of 1/4"-20 and 3/8"-16 threaded holes on the compact of the cage provide you a wide range of flexibility in attaching accessories such as microphone, monitor, sound recorders, top handle, EVF mount, tripod plate, cheese plate..
Made of aluminum alloy, durable and lightweight..

Check Stock

SmallRig Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2926

Compatibility: This formfitting camera cage is made for Nikon Z5/Z6/Z7/Z6II/Z7II. And compatible with the HDMI & USB clamp of ID 2927 to protect the HDMI & USB cable head..
Key Functions: To ensure the comfort and safety of hand-held shooting, there are interfaces of the shoulder strap and wrist strap of the cage. Built-in cold shoe at the top of the cage makes it easy to install the microphone. And there is a built-in NATO Rail at the left side of the cage, it can be attached to Nato Clamp Handle 2187 for quickly switching..
Multiple Mounting Interfaces: With multiple 1/4”-20 thread holes and 3/8”-16 location holes for Arri. Aim to attach accessories such as Magic Arm 2070, Top Handle 2165, Monitor Mount 2903, etc..
Stable And Anti-twist: The cage will hold the camera tightly through a 1/4”-20 screw at the base and an M2.5 screw at the side. To keep the camera stable and no shaking..
Lens Bayonet Protect: Two threaded holes are reserved at the bottom of the front end of the cage, which is compatible with the FTZ lens adapter ring 2244, to protect the bayonet of the lens..

Check Stock

NICEYRIG Camera Cage for Sony A7III/ A7RIII/ A7IV/ A7RIV/ A7SIII/ A7SII/ A7RII/ A7II/ A9, with M6 Thread Rosette NATO Rail Cold Shoe - 172

This camera cage is compatible with camera A7 IV/ A7 III/ A7R IV/ A7R III/ A7S III/ A7S II/ A7R II/ A7 II/ A9 to prevent damaging. SD card slot, battery compartment, and all camera controls are accessed..
The built-in cold shoe on the top allows to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc..
Rosette at right side is provided to mount compatible with ARRI rosette handgrip for handheld shooting..
A NATO rail is also at left side to mount nato handle and other NATO compatible accessories quick release..
The plate at the bottom of the cage enables you to attach an optional Raiser Block, applicable arca swiss compatible with manfrotto plate..

Check Stock

SmallRig Cage with Sun Hood for SmallHD 702 Touch Monitor CMS2684

【Safe installation】The cage secures to the monitor via three 1/4”-20 screws, with one on the top and bottom, and one on the back.Features....
【Multiple Threaded Holes】Featuring multiple 1/4’’-20 and 3/8’’-16 threads for ARRI allows for mounting accessories such as Magic Arm 2115,....
【Built-in NATO Rails】The bottom features a NATO rail for NATO clamp compatible accessories to quickly release your setup, such as Monitor Mount....
【With Sun Hood】 Dedicated sun hood is included to provide glare protection when shooting outdoor..
【Work with V Mount Battery】 The backplate is compatible with V-Lock Battery Mount 1846 to attach a V Mount battery..

Check Stock

CAMVATE Quick Release NATO Top Cheese Handle with NATO Safety Rail for DSLR Camera Cage Rig - 2120

An upward shoe mount available for accessory.
With NATO-compatible quick release clamp.
60mm NATO rail quick release bar included.
Multiple 1/4"-20 & 3/8"-16 mounting holes.

Check Stock

NICEYRIG Camera Cage Kit for Sony A7Riii/ A7iii/ A7Sii/ A7Rii/ A7ii/ A9 with Cable Lock Clamp M6 Thread Rosette

Fits for Sony A7RIII/A7III/A7SII/A7RII/A7II/A9 to protect your camera well and provide a variety of mounting options. SD card slot, battery....
Cold shoe mount on the top allows to attach articulating arm, EVF mount, rode video microphone, monitor, etc. Besides, features an abundance of 1/4"....
Rosette at right side is to mount compatible with ARRI standard rosette handgrip for handheld shooting.
NATO rail at left side is to mount NATO handle....
Includes a HDMI cable lock (On Upper Left Corner) for organizing the cable as well as protecting your camera HDMI port from damaging.
Made of aluminum alloy, sturdy and lightweight.

Check Stock