ReviewsNato Straps

NICEYRIG Cage for Panasonic Lumix GH5/GH5 II/GH5S, Integrated with Camera Cable Lock Cold Shoe Mount - 191

[VERSION 2] Dedicated for Panasonic Lumix GH5/GH5MII/GH5S. SD card slot, battery compartment, and all camera controls are accessed with this cage..
[Cold Shoe Mount, NATO Rail And ARRI Locating Hole On The Top] Enable you to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc..
[NATO Rail And Cable Lock Design On The Side] Two NATO Rails are on the left and right side to mount NATO quick release accessories, such as Niceyrig handle 268/187. Also, features HDMI cable lock on the left for firmly holding your cable in place.
Features strap hole to attach strap, which facilitates for handheld shooting. There are anti-skid pads on the bottom to keep the camera more stable..
Made of quality aluminum alloy, strong and durable.

Check Stock

NICEYRIG Camera Cage Kit with Cheese Top Handle Cold Shoe Mount NATO Rail Compatible with Panasonic Lumix GH5/ GH5 II/ GH5s

[VERSION 2 CAGE] Dedicatedly designed for Panasonic Lumix GH5/ GH5 II/ GH5S. SD card slot, battery compartment, and all camera controls are accessed. There are 1/4" and 3/8" mounting points for additional accessories attachment..
[Cold Shoe Mount, NATO Rail And ARRI Locating Hole On The Top] Allow to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc..
[NATO Rail And Cable Lock Design On The Side] Two NATO Rails are on the left and right side to mount NATO quick release accessories, such as Niceyrig handle 268/187. Also, features HDMI cable lock on the left for firmly holding your cable in place.
[DSLR Cheese Top Handle] Built-in shoe mount for microphone and video lights, the grip is suitable for handheld shooting.
[Durable and Lightweight] Made of high quality aluminum alloy.

Check Stock

NICEYRIG Quick Release NATO Top Handle with 15mm Rod Clamp, Cold Shoe Mounts for DSLR Camera/ Camcorder/ Cinema Camera Cage

The nato handle is designed for quick release attaching and detaching on the camera. Simply slide onto NATO rail and tighten down the wingnut screw. Get your handle off without needing an Allen key every time..
You can twist the thumb screw off, adjust the handle 180 degree for camera and rigs balance or rotate the nato clamp to use this as a side handle..
The handle is equipped with two shoe mounts at both ends for attaching on camera lights, microphone shock mounts, etc. There are 1/4"and 3/8" mounting points for additional accessories attachment..
The 15mm rod clamp allows for attachment of EVF mount or microphone shock mount and so on. Made of aluminum alloy, lightweight and durable..
This cheese handle is compatible with small-sized camera cages and NATO Rails: compatible with A7/A7R/A7s/A7II/A7RII/A7SII, A6000/A6300/A6500 camera cages, applicable Panasonic G7, GH4, GH5, G85, compatible with Fujifilm X-T2 camera cages, etc..

Check Stock

SmallRig Cage with Sun Hood for SmallHD 702 Touch Monitor CMS2684

【Safe installation】The cage secures to the monitor via three 1/4”-20 screws, with one on the top and bottom, and one on the back.Features....
【Multiple Threaded Holes】Featuring multiple 1/4’’-20 and 3/8’’-16 threads for ARRI allows for mounting accessories such as Magic Arm 2115,....
【Built-in NATO Rails】The bottom features a NATO rail for NATO clamp compatible accessories to quickly release your setup, such as Monitor Mount....
【With Sun Hood】 Dedicated sun hood is included to provide glare protection when shooting outdoor..
【Work with V Mount Battery】 The backplate is compatible with V-Lock Battery Mount 1846 to attach a V Mount battery..

Check Stock

Nitze Lil Stinger Handle Universal Mini Handle Grip with Built-in QR NATO Clamp - PA28M-AK

【Built-in QR NATO Clamp】Nitze mini top handle grip built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever..
【ARRI Locating Holes】ARRI locating holes on the front of the handle can be mounted with Nitze N54-F4 low profile monitor holder. The monitor holder mount supports 180° tilt and 360° swivel with free stop. Dynamic design, arbitrarily adjust the monitor angle which you want..
【Cold shoe Adapter】Mini camera top handle grip equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility..
【Multiple Mounting Points】Nitze nato rail top handle PA28M-AK is filled with 1/4”-20 threaded holes and ARRI locating holes all around the handle for additional attachment options and DIY operations, and connect a variety of accessories for expansion..
【Ergonomic Design】All aluminum alloy material, Nitze nato clamp top handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting. No slip, no sharp edges..

Check Stock

SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299

【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....

Check Stock

OneTigris Single AR Mag Pouch Rifle Ammo Holster with Detachable Mag Sheath (Multicam)

COMPATIBLE - the MOLLE mag pouch fits for 223, 5.56 NATO, AR 15 with 30 Round Mags like M4 and M16, STANAG, PMAG, Lancer L5, FAB Ultimag, Hexmag HX.
QUICK INSERT - the mag pouch with removable plastic insert to hold mags tight and draw mags quickly.
ADJUSTABLE - the magazine pouch with hook and loop and retention straps in both sides to maximize the adjustability.
DIY - the OneTigris mag pouch with loops in front and back for bungees and more setup.
CUSTOMIZATION - Large space in front panel (Loop Side) for patche/badges.

Check Stock

Yamaha FG800 Folk Acoustic Guitar Vintage Tint

Body Body type: Dreadnaught Cutaway: Non-cutaway Top wood: Solid Spruce Back & sides: Nato/okume Bracing pattern: Scalloped Body finish: Gloss Orientation: Right handed Neck Neck shape: Info not available Nut width: 1.69" (43mm) Fingerboard: Rosewood Neck wood: Nato Scale length: 25" Number of frets: 20 Neck finish: Matte Electronics Pickup/preamp: No Brand: Not applicable Configuration: Not app.
Yamaha's FG800 Folk Acoustic Guitar is a reasonably priced entry-level acoustic guitar featuring one of the most popular tonewoods - solid Sitka spruce - for the top.
This gives you a nice mellow tone with a slower response, and keeps the guitar nice and lightweight, a combination that is ideal for a beginner trying to find their way around the instrument.
The nato back and sides also keeps the guitar lightweight and inexpensive while not sacrifcing tone.
Other features of the FG800 include a rosewood fingerboard and bridge, black and white body binding, die-cast tuners, and a tortoise pickguard.

Check Stock

SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K - KCVB2419

6K includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. This is a basic and l....

Check Stock

NATO Handbook

Extensive Compatibility : Dual ball heads with magic arm features for NATO Clamp and 1/4"-20 Screws (With Retractable Pins) on the end for DSLR cameras, action cameras, LED lights, flashes, etc..
Anti-twist Retractable Pins : Magic arm with the retractable Pins on each end to prevent twisting. The locating pins are retractable spring designs. You can mount it on the accessories with 1/4" locating holes and NATO Rail or with a 1/4" threaded hole and NATO Rail..
360° Flexible Adjustment : The camera magic arm with an adjustable thumb lever could be adjusted in different positions and angles via both the ballhead and ballhead clamp. It comes with a small magnetic wrench at the bottom to tighten the thumbwheels..
12Ib Payload : The max load capacity of the magic arm is 12Ib (5.5kg). Firmly fix your field monitor, LED lights, audio recorders, etc. Each ballhead is 0.79 inch (20 mm) in diameter. This item weighs only 0.2 Ib (91g) , making it easy to carry around and store..
Durable and Stable : The magic arm holder is made of CNC-processed aluminum alloy and stainless steel, which is durable. The ball head with rubber rings is more stable. The rubber pads on each end protect your device from scratching..

Check Stock

Casio 74243710 Genuine Factory Replacement Parts fits DW-5600 DW-6900 G-5700 GA-100 GDF-100 GL-7200 and GLS-5600 Series

Casio MIL-SHOCK Adapters allow you to use a nylon ZULU, NATO, RAF or other one-piece watch strap(fits 22 mm - 24 mm wide straps).
Fits the following G-SHOCK series: DW-5600, DW-6900, GA-100, GA-110, GDF-100, GL-7200, GLS-5600.
Customer Feedback: Will fit: GW-M5610, GW-8900. Will NOT fit without modification: GW-5600J, AWG-100.
This newest version is easier to install and fully reversible.
Included: Two adapters, 1 pair of easy-install spring bars.

Check Stock