ReviewsNbr Gasket

Quafwia 2 pcs Aluminum Camlock (1\ part D) Cam & Groove Hose Fittings, cam Lock Fittings Female Coupler x Female NPT Thread cam Lock Fittings camlock Coupling (1'')

  • NPT threads are designed specifically for the U.S. market.
  • A Camlock D with a Gasket, which has been assembled in the Camlock.
Check Stock

Beduan 270pcs Compressor O Rings Kit 18 Sizes Car Air Conditioning AC Rubber O-Ring Gasket Assortment Set (Green)

  • Made of commercial grade Nitrile Butadiene Rubber (NBR) material with corrosion resistance, abrasion, high temperature and high pressure.
  • NBR O-rings can be used under -40°C (-40°F) to 120°C (248°F) temperature.
  • Rubber Gasket provide a good sealing to prevent water leakage in oil lines, fuel plumbing, faucets, sinks, filters, toilets, and machinery.
  • Wide Applications for electronic equipment , Pipes, faucets, pumps, solenoids, pressure gauges, sensors, autos, motorcycles, ships, engines, spray guns, etc.
  • No contact corrosion, no pollution medium, no abnormal smell, environmental friendly. Different size O rings in one plastic organizer case, the required size can be easily selected, eliminating the trouble of sorting and selecting the size.
Check Stock

U-Turn Fasteners - Garlock 3000 Blue-Gard Non-Asbestos Sheet 1/16 Thick - 12 x 24 inch Gasket Material (1 Sheet)

  • 12" x 24" Rectangle Sheet of Garlock 3000 Non-Asbestos Gasket Material (4 Pieces).
  • 1/16 inch thick piece of Non-Asbestos Gasket Material. Common thickness for Gaskets.Easily cut with a knife or a press..
  • Branded Garlock 3000 Non-Asbestos Gasket Material. Premium Material made of aramid fibers and a nitrile (NBR) Binder. It exhibits effective sealing characteristics in a wide variety of application s in the following industries: water and waste water, oil and gas, and pulp and paper..
  • Great item to keep around with many uses. Use this sheet of material for cutting custom gaskets, leveling, and waterproofing..
  • Mega Value - Our Neoprene Material is offered in multiple thicknesses, shapes, and package sizes, providing multiplie pre-cut options so you can get the perfect shape and save money in bulk if desired..
Check Stock

Nipple, 1 X 4 In

  • Price For: Each Item: Y Strainer Connection Type: NPT Max. Pressure: 150 psi Length: 4-7/8" Pipe Size: 1" Gasket Material: NBR Width: 8" Height: 7" Flow Rate: 30 gpm Screen Area: 17" Max. Fluid Temp.: 140 Degrees F Blow-off Port: 3/4" Country of Origin (subject to change): Israel.
Check Stock

C-4401 Green, 1/8\ Thick Gasket Sheet (Synthetic Fiber, 20\x20\)

  • Compressed Non-Asbestos Synthetic Fiber, NBR Binder.
Check Stock

C-4401 Green, 1/16\ Thick Gasket Sheet (Synthetic Fiber, 30\x30\)

  • Compressed Non-Asbestos Synthetic Fiber, NBR Binder.
Check Stock

9 Pieces Blender Accessories Fit for Original Nutribullet Replacement Parts 600 Watt 900 Series Pro Extractor Blade for Nutri Bullet Replacer Blade nb-101b with Rubber Gaskets

  • ...w minutes, making healthy, nutritious smoothies for you and your family to enjoy at home or on the go. Sealed with silicone rubber ring, the replacement blades for Nutribullet have a better sealing effect, more durable and no leakage, just blending your way to a healthier lifestyle every day in no worry..
  • 【Extra 2 Gaskets】-- Please note one rubber washer is pre-installed in the blade assembly already for better seal to avoid leakage. You can use the accessories at once you receive them without any operation. Extra 2 Gaskets are for your future replacement. Do not install the extra Gaskets when test or use. One blade are only sealed with one Rubber Gasket. Every time before operating the appliance Please place the extractor blade onto the cup and twist until it is tightly sealed..
  • 【Package Included】 -- 1 x Blade Replacement with Rubber Gasket Seal O Ring pre-installed already in the blade. 2 x Rubber Gaskets, 1x Brush. Total 4 pieces a set for your Nutri bullet replacer blade. Blade Size: Diam 4 inch / 10.2 cm X Height 1.6 inch / 4.1 cm. Material: Stainless Steel Plastic Silicone..
  • 【Note】-- Never submerge the blade in water. Simply twist off the blade, hand wash with warm soapy water and rinse. Dry the extractor blade completely. DO NOT REMOV....
Check Stock

Sur-Seal NA1001.06230x30 Green/White/Blue Nitrile Aramid TEADIT NA1001 Non-Asbestos Sheet Gasket, 29.5\ Length x 31.5\ Width x 1/16\ Thick

  • SSS NA1001 is a compressed non-asbestos sheet gasket material.
  • SSS NA1001 is produced from a combination of aramid and other synthetic fibers and bonded with nitrile rubber (NBR).
  • Manufactured through the hot calendar process, SSS NA1001 has undergone rigorous quality control standards that are registered under ISO-9001 certification.
  • SSS NA1001 is suitable for service handling through the following general media categories: Diluted alkalis, Industrial gases, Mild organic and inorganic acids, Synthetic oils, and other general chemicals.
  • This unique blend of aramid fibers, fillers, and a NBR rubber binder provides improved torque retention and drastically lowered emissions levels.
Check Stock

TayMac RLB100 Threaded LB Conduit Body Die Cast Aluminum Stamped Steel Cover 1-Inch

  • Durable die cast aluminum body construction with a premium powder coat finish.
Check Stock

141 pieces Flat Washers, Seal Ring Seal, O-Ring Hydraulic Seal Kit Assortment Rubber Washer Different Size for Tap

  • Flat Gasket Combination Set: NBR gasket, O-ring for shaft and tube, with good airtightness..
  • Excellent Material: Nitrile rubber has excellent oil resistance, water resistance, wear resistance, high temperature resistance, and good air tightness.
  • it is a high-quality accessory for bearings and plumbing joints..
  • Uses: Suitable for faucets, cylinders, valves, pumps, automobiles, bearings, etc. Suitable for almost all bearings and faucet accessories..
  • Multiple Sizes: 18 sizes, according to different application scenarios, with different quantities, a total of 141 pieces, all are universal flat gaskets, one-stop shopping..
  • Boxed Packaging: pre-sealed small compartments, packed in a practical plastic box, with corresponding size markings, convenient for your use, and transparent cover at the same time..
Check Stock

MECCANIXITY Bonded Sealing Washers G1/2 28.5x19x3.4mm Carbon Steel Nitrile Rubber Gasket, Pack of 10

  • The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal.
  • Nitrile Butadiene Rubber (NBR): Hardness: 60A.
  • Working Temperature Range: -20°C to 100°C (-4°F to 212°F).
  • Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
  • The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines.
Check Stock