ReviewsNegative Insert

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

【Specifications】Voltage Supply: 9-12V DC Input.
Input Distortion: less than 1% (at 1KHz).
【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..

Check Stock

zonoz FS-5 Digital Film & Slide Scanner - Converts 35mm, 126, 110, Super 8 & 8mm Film Negatives & Slides to JPEG - Includes Large Bright 5-Inch LCD & Easy-Load Film Inserts Adapters

FILM TO JPEG IN SECONDS – Powerful 14/22MP zonoz FS-5 High Resolution Film Scanner. Converts Old 35mm, 126, 110, Super 8 & 8mm Negatives & Slides to JPEG Digital Files. Perfect for Enhancing & Printing Old Photos & Sharing Old Film Formats on Social Media..
SIMPLE & EASY TO USE – Largest on market, 5-Inch Wide Screen TFT LCD Color Display, – High Definition Built-In Color Display Features Adjustable Brightness. Simple and Easy to Use Stand-Alone Operating Film & Negative Scanner - No Computer or Software Required. Mac & PC Compatible "Plug-and-Play" no drivers or software required..
AN ADAPTER FOR EVERYTHING – Unit Arrives w/Multiple Film Inserts & Adapters for Fast, Flexible Operation.
Big One-Touch Buttons Allow for One-Step Scan & Save.
INTUITIVE USER INTERFACE – Once the image appears, press "Capture/Scan". It is that easy. Dedicated Scan & Home Buttons Provide Easy One-Press Scanning & Quicker Menu Navigation.
View & Edit Current Slide or Gallery Pictures on the Color Display. Includes Helpful Tray & Insert Directory.
Easily Edit Image RGB & Resolution, Browse Gallery, (supports up to 32GB SD Card) & More..
WHAT'S INCLUDED – FS-5 Film & Negative Scanner, 35MM Slide & Negative trays, USB Power Cable, Worldwide Voltage 110V/240V USB AC Ada....

Check Stock

GELRHONR 1Ft RCA Male Plug to AV Screw Terminal Cable, Free-Soldering,Phono RCA Cable Audio Adapter to 2 Screw Terminal Female Audio/Video Connector-2PCS

✪ RCA to Screw Terminal adapter Cable:Can extend the length of the RCA Audio male cable and audio signal transmission,connector for RCA to connect the audio and video interface of the device.Such as home theater, background music, converter, etc., for transmitting audio and video signals..
✪ RCA to AV Screw Terminal with Solderless type:Easy to use,stripped about 1/2" of wire end.After that simply loosen the terminal screws with a Phillips screwdriver, insert the cable, and screw it tightly..
✪ Gold-plated design:Gold plated connector makes it durable for using and improve the signal transmission.Our RCA cable audio adapters make perfect transmission effect.
✪ EASY INSTALLATION,Positive +/ Negative marked：Clearly marked, Positive +/ Negative - points are labeled in the black plastic housing with molded letters.Pay attention to the polarity when connecting the wires..
✪ Wide applications: suitable for most audio/video speaker CCTV applications for RCA cable..

Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
For semi-finishing and finishing operations.

Check Stock

AXLIZER 2PCS PC Motherboard Internal Speaker, Computer Motherboard Built-in Speaker, Motherboard Buzzer, Alarm Buzzer, Computer Box Speaker

Material: 100% brand new high-quality plastic and metal, durable, fine workmanship, corrosion resistance, more stable performance, stable performance, high reliability..
With BIOS alerts, you can easily get feedback, quickly find problems, or ensure normal startup without installing multimedia.
through computer power supply, we will hear familiar sounds..
Wiring: red is positive and black is negative (in fact, both positive and negative wires can be used as long as they are connected to the speaker interface). Two 6cm / 2.36 inch red and black wires can keep the PC shell clean and tidy..
The 4-pin female connector is directly inserted into the speaker interface of the main board, which is convenient to insert into the speaker interface of the front panel of the main board. These speakers are used to obtain the beep specification from the main board alarm system and other electronic products. Keep the cables inside your computer cabinet in order..
In many cases, you may not need a complete set of multimedia speakers on your PC or office environment. You can still hear this PC boot specification boot with built-in speaker installation to ensure all work results are accurate. You can also hear a beep confirm when you plug in the USB device..

Check Stock

ZONOZ FS-3 22MP All-in-1 Film & Slide Converter Scanner w/16GB SD Memory Card, Speed-Load Adapters for 35mm, 126, 110 Negative & Slides, Super 8 Films - Worldwide Voltage 110V/240V AC Adapter (Blue)

ZONOZ FS-3 22MP All-in-1 Film & Slide Converter Scanner w/ 16GB SD Memory Card, Speed-Load Adapters for 35mm, 126, 110 Negative & Slides, Super 8 Films - Worldwide Voltage 110V/240V AC Adapter (Blue).
With our zonoz FS-THREE film scanner, you won't need anything else to get started. Using the film scanner is very easy with our intuitive design. Just load the film or slide onto the negatives or positives holder, and insert into place. Once the image appears, press "Scan". It is that easy. Your image has been scanned and saved to the FS-THREE's built-in memory. Items can also be saved to an SD card also (This Bundle Includes a 16GB SD Memory Card)..
The zonoz FS-THREE also has some very convenient features like scanning resolution and brightness. You can also flip/mirror images to eliminate some simple loading errors. This amazing and portable film scanner is all you need to convert your old films and slides into permanent memories..
35mm negative film scanner with high resultion 22MP image output. Fast conversion, only takes seconds to scan an image. 35mm slide converter scanner with high resultion 22MP image output. Fast conversion, only takes seconds to scan an image..
This ZONOZ FS-THREE bundle includes a 16GB SD Memory Card. - Simple Unique Stand-A....

Check Stock

AEDIKO 50pcs CR2032 Vertical Button Cell Battery Sockets 3 Pin Holder Case Plastic Shell Type Black

50pcs CR2032 Coin Button Cell Holder,Fits CR2032 Button Cell (Battery is NOT Included).
Body Size: 23 x 18 x 5mm / 0.9" x 0.7" x 0.2"(L*W*H).
Two Negative Leads, and One Positive Lead,Easy to Connect to the Pin Connector.
Vertically Mounted,Easy to Insert or Remove, Holding the Battery in Place Firmly.
Ideal Accessories for DIY Project or Other Electric PCB Board.

Check Stock

TJATSE 5 Pieces Indexable Carbide Grooving Inserts GTN-2(QC1402) Multi Layer Tin Coated Cut-Off CNC Lathe Tool Inserts

【Cut-Off Grooving Inserts】:Made of solid carbide with multilayer coated, carbide CNC cutting offer long tool life and faster cutting speed, low friction coefficient, good wear resistance. Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength..
【TJATSE 5 x GTN 2(QC1402)】:Insert Type: GTN-2, Lead Angle: 0, Width(Thick): 0.087.

Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
It is not necessary to remove tool from chuck or tool post.
Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.

Check Stock

Accusize Industrial Tools 4 Pc 1/2'' Round Shank Indexable Boring Bar Set with Tcmt21.50 Carbide Inserts, 90 Degree, 2627-9104

Round shanks allow the operator to set positive or negative rake. indexing the insert.
Chip breaker eliminates long stringer chips. It is not necessary to remove tool from chuck or tool post.
A new cutting edge may be presented by simply. Screw Down Style..
Positive Rake 90Degree Lead. Uses 0.050" key. C6 grade: carbide for steel and alloy steel..
1/4" I.C. carbide inserts fit all bars. Radius = 0.015”. Key = T8. Shank: 1/2". Piece per set: 4..

Check Stock