ReviewsNegative Printing Plate

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

BabylissPRO Ceramix Xtreme 1 Straightening Iron Red

  • The BaBylissPRO Ceramix Xtreme hair straightener features ceramic plates for even heat distribution to eliminate damaging hot spots while far-infrared....
  • Ceramic plate technology deliver even heat distribution without hot spots & negative ions leave locks smooth & shiny..
  • Use this ceramic flat iron to smooth & straighten hair. It can also be used to create loose, beachy waves..
Check Stock

16mmx16mm Batteries Spring YQBOOM 20 Pairs Metal Battery Contact Nickeling Plate Replacement Negative to Positive Battery Springs

  • 【Product Name】:Battery Spring Negative to Positive Contact Plate.
  • 【Battery Contact Plate Size】:16mm x 16mm/0.63" x 0.63".
  • Spring Length: 12mm/ 0.48". Package Content: 20 Pairs x Battery Spring Plate. See Figure 2 for details..
  • 【Spring Contacts Material】:High quality metal material makes better durability, beauty and electrical conductivity. Effectively protect the battery and reduce power waste..
  • 【Metal Battery Contact Plate】: This product is for 18650 case box only. Note: Battery is not included..
  • 【Worry-free Shopping】: If you have any question, please contact us directly. We promise to provide quality products and friendly customer service to make customers good purchase experience..
Check Stock

For YAMAHA MT-07 Tracer/MT-09/FZ-09/ MT-10 License Plate Holder Rear Tail Tidy Fender Eliminator Kit & LED Turn Signal

  • High Quality lightweight fender eliminator,Material:3MM Aluminum plate,CNC maching.
  • Include the LED light,Surface finish:Aluminum plate- Anodized surface protective layer.
  • includes indicator mounting position. -This lightweight aluminum bracket easily mounts a standard size number plate.....
  • LED Turn Signals Light-Brand New ,Super Bright Material: High Quality ABS plastic Voltage: 12V LED Quantity:12 LED.
  • Double sided LED Light,Color:Amber/White Connect:3 Wires (Black:Negative；Red:Positive，Amber light.
  • Blue:Positive,White Light,you can use for brake....
Check Stock

KOYOFEI 2PCS 3D Printer Platform for Elegoo Mars 3 Building Plate and Magnetic Sheet Flexible Steel Plate Flex Bed for Elegoo Mars 3 3D Printer 150x95mm

  • Flexible and Magnetic Platform: The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from....
  • Robust and durable stainless steel material: The magnetic printing platform is made of high quality stainless steel material and has good elasticity.....
  • Size information: The size of the magnetic steel plate is 150 * 95mm, and the thickness of this platform is 3-4mm, compatible with ELEGOO Mars 3. Due....
  • Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing....
  • Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated,....
Check Stock

Negative Supply Basic Film Carrier 35 - Quickly Scan Using a Digital Camera

  • Use: Introducing the Negative Supply Basic Film Carrier 35: The perfect tool for scanning strips or full rolls of 35mm film quickly, easily, and affordably whether you’re at home, on the go, or in the studio.
  • Benefit: Everybody loves 35mm film thanks to its ease and access, and the ability to quickly and genuinely capture life’s moments. Whether it’s a day at the beach, a casual walk around your neighborhood, or photographing a holiday event, 35mm film is perfect for these and more. This Basic Film Carrier 35 extends that ease and access, allowing you to easily scan and share your photographs with friends and loved ones.
  • Construction: With a solid hand assembled build, the body of the device is produced in house using a proprietary process pioneered by Negative Supply utilizing 3D Printed Carbon Fiber PETG and bonded Tolex (what’s on the outside of audio equipment and guitar amplifiers). Using fasteners, 3D Printing, and the very best 3M adhesive, we believe this device solidly lives up to the Negative Supply standards.
  • Fast: Keeping your film perfectly flat with our unique channel guides, the Basic Film Carrier 35 allows you to scan a full-length roll of film in as fast as two minutes.
  • Ideal For: Building off the wide ecosystem of Negative Suppl....
Check Stock

uxcell 20Pairs 18650 Battery Negative to Positive Conversion Spring Contact Nickeling Plate 16.5mmx16mm

  • ⚡: 20 Pairs 18650 Battery Positive Negative Conversion Spring Contact Nickeling Plate 16.5mmx16mm.
  • ⚡: Overall Size: 16.5 x 16 x 0.3mm/ 0.65 x 0.63 x 0.012inch(L*W*T).
  • Package Content: 20 Pairs x Battery Spring Plate.
  • ⚡: Battery plate is using in battery case box.
  • ⚡: This product is for 1 x 18650 battery case box only. Note: Battery is not included..
  • ⚡: It is made from metal, has great electrical conductivity, better electric performance..
Check Stock

uxcell 50Pairs 18650 Battery Negative to Positive Conversion Spring Contact Nickeling Plate 16.5mmx16mm

  • ⚡: 50 Pairs AA Battery Positive Negative Conversion Spring Contact Nickeling Plate 16.5mmx16mm.
  • ⚡: Overall Size: 16.5 x 16 x 0.3mm/ 0.65 x 0.63 x 0.012inch(L*W*T).
  • Package Content: 50 Pairs x Battery Spring Plate.
  • ⚡: Battery plate is using in battery case box.
  • ⚡: This product is for 1 x 18650 battery case box only. Note: Battery is not included..
  • ⚡: It is made from metal, has great electrical conductivity, better electric performance..
Check Stock

Silk Screen Printing Machine 4 Color 4 Station Screen Printing Press Screen Printing Machine Printer DIY T-Shirt

  • Screen printing is arguably most versatile in printing, almost everything can be used as substrate. Our company provide this 4 color 4 station screen....
  • Assembling video instruction will be sent online. Please contact us if you need any instruction..
  • Plate washing is one of the most important processes during screen printing. Premium plate-washing tank of our company is furnished with water tank,....
  • 1800W Flash Dryer (006042) Foundation is consistent with heating box ,stable, saving-space and overcoming the flaw caused by traditional “十”that....
Check Stock

Taiss 4PCS License Plate Light,Waterproof Bolt Lamp,12V License Plate Light,Ultra Bright White LED Bulb,Used In Trucks，Automobiles And Motorcycles Etc. F-027-4P

  • Product name: license plate lamp (the license plate lamp is equipped with a 12V Led white lamp).
  • Material: aluminum alloy shell, long service life, safer and more reliable.
  • Product specifications: working voltage: DC12V；.
  • Product features: good sealing performance.
  • Installation: The positive line is connected to the positive line of the lamp power supply to be lit, and the negative line is connected to the negative line of the power supply, which is applied to automobiles, motorcycles, trucks, bicycles, ATVs, etc..
Check Stock

EasyinBeauty Hair Straightener Flat Iron with Ionic Infrared, Professional Hair Straightener and Curler 2 in 1 Ceramic Tourmaline, Flat Iron for Hair with 5 Adjustable Temp, LED Display, Fast Heating

  • ROCK A GORGEOUS LOOKING HAIRSTYLE ANYTIME: Our flat iron hair straightener 2 in 1 comes with fast heating, negative Ion and infrared light helps you to create any look in no time. Transforms messy hairstyle into all kinds of professional back from salon results..
  • STABLE & NO HAIR DAMAGE: Newest hair flat iron heating tech features 5 adjustable temperatures ranging from 300 to 450° F stable heat. Infrared and a 2 million negative ion technique take less time than others to style your hair effectively & safely without damaging the hair..
  • CERAMIC GLAZE HAIRCARE COATING PLATE: To achieve a best Hair straightening result, hair straightner with ceramic coated titanium plate helps you to create any look in no time. 3D floating plate continuously moves while straightening & curling, ensures a comfortable and smooth hair..
  • FOR ALL HAIR TYPES: Flat Iron helps you to create beachy wave, bouncy curls and straight tresses perfectly. Go unlock your classy styles with our flat iron for all type of hair. Perfect gift packed with glove and hair clips suitable for styling thin hair and thick hair..
  • GOOD SERVICE & SAFE GUARANTEE: We sincerely hope that using our product will be a wonderful experience. EasyinBeauty will provide you excellent services and 100% satisfact....
Check Stock