ReviewsNema Motor

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

Siemens 14DUE32AF Heavy Duty Motor Starter, Solid State Overload, Auto/Manual Reset, Open Type, Standard Width Enclosure, 3 Phase, 3 Pole, 1 NEMA Size, 10-40A Amp Range, A1 Frame Size, 120 Separate Control 60Hz Coil Voltage

  • Price For: Each Standards: UL, CSA Enclosure NEMA Rating: No Enclosure Starter Type: NEMA Style Hz: 50/60 Item: NEMA Magnetic Motor Starter Auxiliary Contact Form: 1NO Number of Poles: 3 Overload Relay Amp Setting: 5.50 to 22A Action: Nonreversing NEMA Size: 1 Width: 3.5" HP @ 3 Phase - 575V: 10 HP @ 3 Phase - 480V: 10 HP @ 3 Phase - 240V: 3.
  • HP @ 3 Phase - 208V: 3 Height: 7.44" Depth: 3.75" Coil Volts: 120VAC Amps AC: 27 Country of Origin (subject to change): Mexico.
Check Stock

Siemens 14FUF32BA Heavy Duty Motor Starter, Solid State Overload, Auto/Manual Reset, Open Type, NEMA 1 General Purpose Enclosure, 3 Phase, 3 Pole, 2 NEMA Size, 13-52A Amp Range, B Frame Size, 110-120/220-240 at 60Hz Coil Voltage

  • Price For: Each Standards: UL, CSA Action: Nonreversing Starter Type: NEMA Style Item: NEMA Magnetic Motor Starter Auxiliary Contact Form: 1NO Number of Poles: 3 Height: 7.44" Depth: 3.75" Enclosure NEMA Rating: No Enclosure Coil Volts: 120VAC Overload Relay Amp Setting: 10 to 40A Amps AC: 27 NEMA Size: 1 Hz: 50/60 Width: 3.5" HP @ 3 Phase - 480V: 10.
  • HP @ 3 Phase - 240V: 7-1/2 HP @ 3 Phase - 208V: 7-1/2 Country of Origin (subject to change): Mexico.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

FYSETC Ender 3 S1 3D Printer Stepper Motor 42-40 Nema 17 Ender 3 CR6 SE Extruder Motor 2 Phase 1A 1.8 Degree with 39.3in Connecting Cable Compatible with Ender 3 Pro V2 Ender 5 Pro Plus CR-10 E-axis

  • Motor Model: 42-40 Nema 17, widely work for Most 3D Printer Reprap Ender 3 CR-10. It fits for the E-axis of Crealit Ender series and the CR series,....
  • High torque -Holding torque up to 0.45Nm. Low noise, have better high speed performance..
  • Size: 42mm X 42mm X 40mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable..
  • With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading. The line sequence....
  • Package Includes: 1 x 42-40 Nema 17 Stepper Motor.
Check Stock

Worm Gear Nema23 Stepper Motor 3.5A L2.1inch Gearbox Ratio 30:1 Speed Reducer for CNC DIY Router

  • 2 phase stepper motor 2.1inch long, 1.3Nm.
  • Speed reducer motor output speed 0--20 R/min.
  • Applied to CNC Router, Engraving, Milling, Lathe. Fast Delivered 4-6 days after shipping..
Check Stock

CNCTOPBAOS 3 Axis GRBL Control Board USB Port CNC Router Controller Board grbl 1.1f with GRBL Offline Controller Remote Hand Control for CNC Engraving Milling Machine Mini DIY 1610 CNC 3018 PRO

  • ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller.
  • ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
  • ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
  • ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
  • ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
  • Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
  • ♞【Offline Controller】It supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check Stock

3Pcs Nema23 Stepper Motor Mount 57 Stepping Motor Mounts Mounting Base Plastic Bracket Clamp Support Holder Fixed Seat for CNC Router Milling Engraving Machine DIY Acessories

  • 【Usage】for Nema23 Stepper Motor Bracket/57 stepper motor.
  • 【size】 57*57*40cm【Material】Plastic.
  • 【Package Includes】3pcs 57 Stepper Motor Mounting Bracket.
  • 【Precise Hold-cutting】This motor mount bracket owns convenient mounting holes. These holes is cut by puncher, perfect matched with the 57 stepper motor..
Check Stock

MINARIK MM23001C 0-90/0-180V-DC 1/4-2HP 5A AMP DC MOTOR DRIVE D506404

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

STEPPERONLINE 1 Axis Stepper CNC Kit Nema 34 12.0 Nm(1699.68oz.in) 6A Stepper Motor & Driver

  • 1 xDigital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit.
  • 1 xNema 34 Stepper Motor Bipolar 1.8deg 12.0 Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires.
Check Stock

General Pump DCFSCP24GZ Flat Surface Cleaner C/W Brush Skirt, 3-Arm, Brass Inlet Water Filter, Zerk Fitting, 24\

  • 4.0 HP Nicolini Motor 5/8" shaft Nema 56c operates on 220-230V/17A circuit.
  • Direct drive Bertolini WBH 2130 pump w/brass manifold and ceramic plungers.
  • Low RPM pump and motor-1750 RPM-means less noise and longer life.
  • Quick connect outlet and Water filter Garden hose connection for inlet are Included.
  • Pump and electric motor are made in Italy.
Check Stock