ReviewsNeoprene Duct Connector

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ...t hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesiv....
Check Stock

90 Degree Dryer Close Elbow Vent Tube Connector，Metal Elbow Connector for HVAC Duct Ducting Pipe or Hose Ductwork, 4\

  • ✔ [Widely Compatible] The end of elbow connector is simple to adjust using duct crimper, crimped at the end of elbow connector. This ideal connect with most pipe, most commonly used in HVAC appliance venting, especially clothes dryer or bathroom venting. You must make sure that your your pipe size matches this one before purchasing. This is very important important important..
  • ✔ [Venting Kit Assembly Included] : 1 X 90 Degree Elbow. Solving the problem that pipe linking with steering. makes it very versatile..
  • ✔ [Simple Install by Yourself] This elbow connector is simple to connect with pipe. Fitting perfectly with any other 4” pipe, vent and connector, just push the elbow connector into the pipe and fittings together. Easy to use DIY and it’s a perfectly designed product for home improvement..
  • ✔[Premium Quality Affordable] 4" diameter 90 degree duct elbow connector is so lightweight and made of flame resistant steel and long durability. It is the best way to ensure better air circulation at your home. You don't have to compare other prices and quality. Buying directly is the best option..
  • ✔ [Best Choice With Confidence] This LG venting kit is a perfect choice for you, There is no reason for 100% refund or exchange within 30 da....
Check Stock

Tech Drive Duct Increaser and Reducer, 6 inch to 4 inch Inline Adapter for Heating Ventilation and Air Conditioning and Exhaust Ventilation Systems, Made from Aluminum.

  • It's use to Connector two different size duct, used for Heating Ventilation and Air Conditioning system duct work in any building or home improvement..
  • Designed to transition between 6 inch (150mm) to 4 inch (100mm) diameter ducts..
  • Easy installation, using duct tape or duct clamps to connect air duct adapter..
  • Made of aluminum metal that is corrosion resistant and can withstand high temperatures. it's can be prevent corrosion and oxidation,rust moisture and reduces fire hazards..
  • Ideal for ducting your Tumble Dryer, Bathroom or Kitchen exhaust fan, In-Line Fans, or Cooker Hood..
Check Stock

WHITE DRYER DUCT TO WALL CONNECTOR QUICK CONNECT FOR DRYER VENT 6 FOR 4 TUBES… 1 Pack

  • New Aftermarket Quick Dryer Duct Vent Wall Connector.
  • Compatible with 4” dryer duct hose ~ Overall Diameter measures approximately: 6".
  • Does NOT include Mounting Hardware or Vent hoses ~ Easy Two-piece assembly – See images for instructions.
  • Quantity: 1 ~ Color: White ~ Made in USA!.
  • Convenient dryer maintenance and overall safety - provides a simple, easy and quick access point to the dryer duct for cleaning of lint and debris on....
Check Stock

Powerful Industrial Exhaust and Ventilation Fan (14 Inch)

  • HIGH-CAPACITY FAN: Ventilation fan operates on a single, impact-resistant centrifugal blower wheel with 109 CFM, 0.9 Sones, and 120V for a powerful and effective performance.
  • HEAVY-DUTY: Housing is constructed of 20-gauge galvanized steel and features a 6" round metal duct connector to provide long-lasting use.
  • CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
  • EFFECTIVE: Motors are permanently lubricated to provide continuous and quiet operation.
  • VERSATILE: Install fan in ceiling or wall -wherever it's needed most!.
  • 109 CFM 0.9 Sones (AMCA), 120V, 1.1 amps.
  • White Polymer Grille with 6-Inch round duct connector.
  • Low profile, white polymer or painted white enamel steel grille.
  • Single, impact-resistant centrifugal blower wheel.
  • 20 gauge galvanized steel housing and can be ducted horizontally or vertically - in-line ducting available with separate adapter.
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ... hose made of high quality flame retardant aluminum that measures 4" (diameter) x 10 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesiv....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ...t hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesiv....
Check Stock

doublesmt 6 Inch Thread Portable A/C AC Air Conditioner Exhaust Hose Coupler/Coupling/Connector, Support Clockwise/Counter-clockwise Thread, AC Hose Coupler Coupling Extension

  • ✅ Universal Clockwise Counterclockwise threaded coupler connects to a threaded hose. Exhaust Hose Coupler provide a best solution for putting my ac exhaust through the wall or your window..
  • ✅ Using this portable air conditioner connector to extend the exhaust duct no longer needs to distinguish between left-handed and right-handed. Left-handed and right-handed can be used. One left-handed and one right-handed can also be connected..
  • ✅ Ac air conditioner exhaust hose coupler:secure fit on 6-inch tubes with no leak. Compatible with Outer diameter 138mm. Inner diameter 6 inch..
  • ✅ Portable ac flex duct coupler inner: diameter does not take the thread into consideration and is the maximum diameter of a compatible tube..
  • ✅ Using this 6 inch portable ac connector to extend the exhaust duct no longer needs to distinguish between left-handed and right-handed. Left-handed and right-handed can be used. One left-handed and one right-handed can also be connected.6 inch or 5.9 inch is same product..
Check Stock

Broan-Nutone L400 High Capacity Ventilator Fan, Commercial Exhaust Fan, 2.3 Sones, 434 CFM

  • HIGH-CAPACITY FAN: Ventilation fan operates on two impact-resistant centrifugal blower wheels at 434 CFM, 2.3 Sones, and 120V for a powerful and effective performance.
  • HEAVY-DUTY: Features a sturdy, 4.5" x 18.5" metal duct connector to provide long-lasting use.
  • CUSTOMIZATION: Fan ducts horizontally, vertically, or in-line with a separate adapter for your convenience.
  • EFFECTIVE: Automatic backdraft dampers and permanently lubricated motors provide continuous and quiet operation.
  • VERSATILE: Install fan in ceiling or wall -wherever it's needed most! Not for use over tub or shower..
  • Two impact resistant centrifugal blower wheels and quiet automatic backdraft dampers.
  • Can be ducted horizontally or vertically.
Check Stock

AC Infinity Inline Duct Fan Silencer 6 Noise Reduction Muffler Blower Silencer for Indoor Hydroponics Grow Tent Ventilation Systems

  • A duct muffler designed for use with inline fans in grow tents, bathroom fans and other HVAC applications..
  • Features dual aluminum flanges to help absorb sound waves from fan vibrations and airflow..
  • High-quality neoprene foam in an egg crate pattern that will reduce fan noise by up to 50%..
  • Galvanized steel body that is corrosion-resistant and can withstand extreme temperatures..
  • Duct Opening Diameter: 6 inches | Length: 20 inches | Weight: 3.90 pounds.
Check Stock

iPower 6 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose with 4 Stainless Steel Clamps for HVAC Ventilation, Silver

  • Duct fan connector: It's compatible with 6 inch diameter dryers/fans. Is primarily used with duct fan systems in various air circulation and ventilation projects to transport air. Increasing airflow and reducing space usage.
  • Flexible installation: The length and shape are flexible to change for exhaust fan blower or inline fan.
  • With 4 stainless steel duct clamps in the same duct opening size for ensuring a seamless junction.
  • Fire proof coating: Flexible ventilation ductings made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
  • Wide applications: Perfect for hydroponic planting rooms and grow tents, bathrooms and lofts, heating and cooling transportation or other devices. Also can be used to cool closets, racks and cabinets.
  • Package includes: 6 inch ventilation ducting.
  • 2 pairs 6 inch stainless steel clamps. Note: Temperature endurance range from 0 - 185°F (-18℃ - 85℃).
Check Stock