ReviewsNetwork Expansion Module

QNAP DUAL-PORT 10GBE NETWORK ADAPTOR

5 GbE network expansion card The 5 GbE network expansion card delivers speeds of up to 5 Gbps.

This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
3.5" TFT Display (320 x 240) 12 lines or speed dial keys.
HD Voice up to 7KHz on all audio paths, Asian character support.
2 x Ethernet 10/100 or GigE (VVX410 ), 4-way navigation cluster.
Supports VVX Expansion Module and VVX Color Expansion Module.

【ATX power splitter board】ATX power splitter board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V10.8V (ADJ) output voltage..
【Precise Screw Positioning】The voltage output terminal of the ATX power expansion board corresponds to each screw terminal..
【With an acrylic box】At the same time, the panel is also equipped with an acrylic box kit for easy use..
【Easy to Connect】Compatible with 3.3V: STM32 MCU, network communication equipment, such as WiFi for Bluetooth and other devices, generally for microcontrollers, and some lowpower modules, etc. 5V: for Raspberry Pi/Tinker Board/Nano Pi/USB interface, etc..
【Widely Compatible】Compatible with 9V motor drive, display drive module, etc..
12V motor drive, LED lights, vehicle equipment requiring less than 24w of power, etc..

This product provides a convenient and cost-effective way to power equipment..
This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
With small size, easy to carry and store, convenient to use and with good performance..

...b Gateway】Please make sure your smart devices is compatible with Tuya. This Tuya ZigBee smart wireless gateway works with 2.4G WIFI and ZigBee HA 3.0. It is integrated WIFI module and Zigbee module, so that the Tuya Zigbee sub-devices can be controlled remotely via WiFi on the APP or locally controlled via Zigbee network. Via Zigbee protocol, even if WiFi is not available at home, it will not affect local control of the sub-devices..
【Group Control & APP Push】 Automated scenarios can be set through the APP. Add your Tuya Zigbee devices on Tuya APP (make sure the sub-devices support Tuya), and create smart group for automated smart scenarios applications. Through smart settings, the smart home hub gateway will automatically push notifications to the APP. This Zigbee WiFi Gateway Hub supports up to 30 sub-devices online at the same time..
【Compatible with Tuya ZigBee Hub (Also Smartthings Supported)】- Considering the status of unstable network or no network, ZigBee 3.0 switch module is really an irreplaceable must to combine with ZigBee gateway to form a home LAN, NO MORE WORRY about no and weak network, easily get control via connected devices as long as there is stable ZigBee signal.
Allows for more devices connected via ZigBee than WiFi prot....

A general add-on heated bed power expansion module for 3D printer.
Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....

ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..

INDUSTRY-LEADING ELECTRIC-GENERATOR TECHNOLOGY: This customizable, versatile energy-storage system connects to your Yeti solar-powered generator via the Yeti Link Expansion module (generator and module sold separately) to provide even more backup power. This expansion battery has a 1,200-watt-hour capacity and charges in 11 hours when plugged into a 72-watt wall charger..
EXPAND YOUR SOLAR-POWER PORTABLE GENERATOR: Increase your Yeti (1000 or larger) by 1.2 kWh with the Yeti Tank battery. Connect this cost-effective lead-acid battery to our high-quality Yeti X and lithium power stations to easily scale your energy storage capacity with the Yeti Link Expansion Module (sold separately). Battery input and output are 100 A..
SAFE & USER-FRIENDLY: We prioritize product safety with multiple layers of protection, including over- and undervoltage protections, temperature protections, and a battery management system to monitor individual cell and battery-pack health. All elements of the product are designed for ease of use..
INNOVATORS IN PORTABLE POWER: Goal Zero created the portable power station category 10 years ago, presenting a new way forward in portable energy use at home, on the job, and off grid. Our products are engineered with precision here in the U....

An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver.
View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide..
An OTA antenna must be installed to use the Module..
A satellite signal and a DISH Network programming subscription is required to operate the OTA module..