ReviewsNetwork Interface Module

Honeywell YTH6320R1001 Wireless Focuspro Thermostat Kit, Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

GeeekPi Raspberry Pi CM4 Router Board,Raspberry Pi Compute Module 4 Expansion Board Breakout Board Module for Raspberry Pi Compute Module 4 Series

  • CM4 Router Board is an expansion board based on the Raspberry Pi Compute Module 4. It brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage, and higher stability for a long time work compared with a USB network card..
  • The board still retains the characteristic GPIO pin header of Raspberry Pi, which makes it applicable for connecting other hat board such as Pi hats, sensors, and PoE hat board, and cooling fan, etc..
  • There is also a USB2.0 interface that can be connected to USB flash driver, USB keyboard, printers etc..
  • Besides, there is an OLED(0.91 inch) screen will help you to customize your Router Board's information display style..
  • 1 x 0.91 Inch OLED Display (Pre-installed).
Check Stock

Honeywell YTL9160AR1000 E-Connect Wireless Programmable/Non-Programmable Line Volt Thermostat Kit

  • Equipment Interface Module (Eim): All Hvac Equipment Is Wired To The Module. Module Receives Communication From The Wireless Devices.
  • Return Air Sensor: Works With The Equipment Interface Module To Maintain Safe Indoor Temperatures If Power Is Lost At The Wireless Thermostat. Maintains 62 F For Heating And 82 F For Cooling.
  • Red Link Wireless Technology: Powered By Red Link Reliability. No Interference With Other Wireless Devices In The Home.
Check Stock

StarTech.com Dual Port 40G QSFP+ Network Card - Intel XL710 Open QSFP+ Converged Adapter - PCIe 40 Gigabit Ethernet Server NIC - 40GbE Fiber Optic LAN Card - Dell PowerEdge HPE ProLiant (PEX40GQSFDPI)

  • 40GbE QSFP+ NETWORK CARD: Converged network adapter provides high bandwidth to servers and workstations for demanding applications.
  • includes virtualization (VT-c), SAN and iSCSI offload support.
  • TECH SPECS: 40 Gbps | Open QSFP+ Port, MSA Compliant | Intel XL710 Chip | MMF & SMF Fiber Support | PCIe 3.0 x8 | PXE Boot | 9K Jumbo Frames | VT-c | VLAN | Full & low profile | 2 Yr Warr.
  • TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits validation tools to validate performance.
  • Fiber LAN card compatible w/leading servers like Dell PowerEdge HPE ProLiant & Lenovo ThinkSystem.
  • FLEXIBLE: Use any MSA compliant QSFP+ module / direct attach cable (DAC) supporting different fiber types.
  • 40GbE Network Interface Card works w/leading switch, router, & device brands like Cisco & HPE.
  • WIDE HYPEVISOR & OS COMPATIBILITY: 40 Gigabit Ethernet NIC works w/Windows 7, 8, 8.1, 10.
  • Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019.
  • CONNECTIVITY TOOLS: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities.
Check Stock

Vanquisher 8-Inch Industrial Rugged Tablet PC, Windows 10 / GPS GNSS / 4G LTE/Drop Survival, for Enterprise Field Mobility

  • One year’s warranty. The package includes: the rugged tablet, US standard wall charger, USB cable, OTG cable, wrist strap..
  • Interface: full size USB, micro USB, micro HDMI, micro SD slot, Pogo pin (dock charger not included), standard earphone jack & DC input..
  • IP67 sealed water-proof and dustproof. Fully rugged construction, MIL-STD810G (temperature, RH, vibration, shock, drop). ideal for wild daily use & enterprise mobile applications such as warehouse work, land surveying, field data collection etc. Designed for mobile workforce, consultants, engineers, field geologists who have demand for real time data entry and reporting..
  • WIFI 802.11 a/b/g/n. Support 3G & 4G LTE network (AT&T, T-Mobile compatible)..
  • Windows 10 Pro. Intel X5 Cherytrail Z8350 Quad-Core processor with speed 1.44Ghz-1.92GHz. 4G RAM, 64G ROM. Up to 128GB expandable memory through micro SD. Support OTG mode (Mouse/Keyboard). Bluetooth 4.0.
  • Built-in u-blox GPS module, support GNSS. Positioning without network required. 7800mAh integrated nondetachable Lithium battery for 8+ hours full-shift..
Check Stock

Cumberland Swan/Vi-Jon 1000032061 Witch Hazel (Pack of 12)

  • USED FOR-- High quality generator controller is integrated with digital, intelligent, and network technology for the automation and monitoring system of a single generator set.
  • MULTIFUNCTION-- Realize the automatic start/stop, data measurement, alarm protection and "three remote" functions of the generator set. Speed sensor frequency range: 1Hz-10KHz, speed sensor voltage range: 0.5V-70V.
  • WITH LARGE-SCREEN-- The controller adopts large-screen liquid crystal (LCD) display, Chinese, English, Spanish and Russian optional interface operation, simple operation and reliable operation.
  • WIDE APPLICATION-- Generator controller is suitable for 3?phase 4?wire, 3?phase 3?wire, single?phase 2?wire, 2?phase 3?wire (120V/240V) power supply 50Hz/60Hz system.
  • GOOD REPLACEMENT-- This generator controller module is a good replacement for your old or broken one, comes with 4pcs brackets, easy to install.
Check Stock

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

  • Double way USBCAN II Debugger with 2 Road CAN interface, PC can be connected to a standard CAN network through the USB bus, the construction of Field bus testing laboratory, industrial control, intelligent building, data processing, automotive electronic.Support VC++, C#, VB, Labview and other two development interface functions..
  • Double way USBCAN II The debugger equipment, CAN bus circuit adopts DCDC power module, industrial grade magnetic coupling isolation chip CAN bus isolation, the interface adapter has a strong anti-jamming capability, greatly improve the reliability.Systems support for WIN98, for WIN200, for XP, for WIN7, for WIN8, for WIN10..
  • Double way USBCANII The debugger can use the USBCAN tools provided by our shop, directly to the CAN bus configuration, send and receive. Users can also refer to the store to provide the DLL dynamic link library, routines to write their own applications. Intuitive, fast hardware filter settings.Added USB protection, CAN bus protection circuit..
  • Double way USBCAN II debugger can be used as a standard CAN bus, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
  • at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
Check Stock

H310B Motherboard, M ATX Motherboard for LGA 1151 Series for, Support Gigabit Network,DDR4,M.2,PCIe3.0, Sata3.0,USB3.0,VGA, for DIY

  • Gigabit Network Card: For Realtek811 gigabit network card is adopted, which is a high performance network control chip specially designed for game players..
  • M.2 Hard Disk Interface: M.2 supports 32GB/s data transmission speed, which is a great choice for operating system and application driver..
  • H310B Motherboard: All solid state capacitor, onboard M.2 high speed hard disk interface, front USB3.0 interface, support 4K high definition video output, onboard gigabit network card..
  • SATA3.0 High Speed Interface: With SATA3.0 high speed interface, fast startup without waiting, strong compatibility, better read speed..
  • All Solid State Capacitor: All solid state capacitor performance is stable, greatly prolonging the service life of the motherboard..
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock