ReviewsNetwork Interface Unit Module

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..

Check Stock

2X Analog Stick Black Replacement Compatible with Sony Playstation Portable PSP 1000 Series

UMD Laser Lens Disk Drive Module Unit KHM-420AAA Connector Replacement Compatible with Sony PSP 1003 1000.
Tips: This is UMD Laser Lens Disk Drive Module Unit KHM-420AAA replacement to replace your old damage UMD Laser Lens Disk Drive Module Unit KHM-420AAA, don't include instructions, please install it by a professional technician..
Broken your UMD Laser Lens Disk Drive Module Unit KHM-420AAA, don't need to change new machine, just buy this item and replce your damage UMD Laser Lens Disk Drive Module Unit KHM-420AAA , let your Device work again again..
Compatible with: Sony PSP 1003 1000 (Please check your machine model before your purchase).
Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..

Check Stock

Intel Dual Band Wirless- MQUPIN Intel 7260.HMW Dual Band Wireless Card-AC 7260 Network Adapter+Bluetooth 4.0 USE for Intel AC Half Mini Pcie Card 802.11 b/a/g/n/ac(1 Pack)

☞MQUPIN Only use for HALF MINI PCI-E Interface.If you are not sure that 7260 network card supports your computer, please give the computer model or original network card picture to us to help you match it..
☞Important Notice: Please must check and confirm your computer's motherboard whether open USB bus before purchase, because this card is going Bluetooth USB bus, if the motherboard does not open the USB bus, then it's unable to use Bluetooth function, also in the device manager cannot identify the new USB Bluetooth hardware.
☞Wide Range Of Uses: Living in rapid development, now an ordinary electrical appliance can have wireless WIFI function, this network card can be used in laptops, desktop computers, small consoles, all-in-ones, advertising machines and other common equipment, but It should be noted that he must have a mini pcie interface to use.
☞Supported Operating Systems: Win7, Win8, Win10, Linux Root4.2.0+, but XP system does not support.Delivers dramatically faster Wi-Fi speeds (up to 867 Mbps1) than 802.11n, with more bandwidth per stream 433 Mbps), more capacity for more users (extended channel bonding 80MHz), broader coverage and better battery life (more data transmit efficiencies reduce power consumption).

Check Stock

HangTon BVP HDC Camera MSU RCP CNU 700 Remote Control Cable for Sony CCA-5 Hirose 8 Pole Male to Male (5 Meter)

Hirose 8-pin male to Hirose 8-pin male connectors.
5m Control cable for Sony CNU-700 Camera Command Network Unit, HDCU-1000/1500 Camera Control Unit, CCU-790P/590P CCU.
Control cable for Sony RCP-700/701/750/751/920 Remote Control Panels, MSU-900/MSU-950 Master Setup Unit, VCS-700..
Provide the control interface for MSU, RCP, and CNU remote controllers Operation for Sony BVP and HDC series cameras.

Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.

Check Stock

Intel Centrino Advanced-n 6235ANHMW Dual Band Network Card, Bluetooth 4.0 Wirless Card for Laptop PC, 2.4G/5G Wi-Fi Card, Internal Network Adapter Card for M93Z M93P M62Z M72Z M73 M83 M82

【Model】Original intel centrino advanced-n 6235ANHMW wireless network card. This wireless network card is dedicated version for Lenovo, and it has Mini PCI-E interface. Broader coverage, more data transmit efficiencies reduce power consumption.
【Performance】It supports 2.4G/5G dual band WiFi wireless network, the maximum connection speed is up to 300Mbps. Bluetooth 4.0 Wi-Fi card, it has larger capacity, higher speed and extremely low latency.
【Compatibility】This wireless network card supports for 802.11a, 802.11b, 802.11g, 802.11n network standard.This wireless network card is compatible with Lenovo M93Z M93P M62Z M72Z M73 M83M82 series.
【Quality】The internal computer networking card is made of high-quality material. Exquisite workmanship, long product life.Portable circuit module board, efficiently avoid from corrosion and abrasion, durable and stable to use.
【Notice】This wireless network card is dedicated version for Lenovo computers, may not support other computers. Please pay attention to purchase. If you have any other questions, please feel free to contact us.

Check Stock

Honeywell YTH5320R1000 Wireless Focuspro Thermostat Kit, Non-Programmable Redlink Enabled

EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
Module receives communication from the wireless devices.
Maintains 62 F for heating and 82 F for cooling.
THERMOSTAT: Same great features of the FocusPRO thermostat - now wireless..

Check Stock

Linksys Incorporat - Linksys Etherfast Dsl/Cable Router - BEFSR41

The Linksys EtherFast cable/DSL router connects multiple PCs to a high-speed broadband Internet connection or to an Ethernet backbone. Configurable as a DHCP server, the EtherFast router acts as the only externally recognized Internet device on your local area network (LAN). The router can also be configured to block internal users' access to the Internet. A typical router relies on a hub or a switch to share its Internet connection, but the Linksys EtherFast router channels this connection through the full-duplex speed of its built-in EtherFast 10/100 four-port switch. This combination of router and switch technology eliminates the need to buy an additional hub or switch and serves your network as a completely dedicated, full-duplex backbone. Now your entire network can enjoy broadband Internet connections supported by its switched backbone. This unit requires an external cable or DSL modem with an Ethernet RJ-45 interface. This product comes with a one-year warranty..

Check Stock

Honeywell YTH6320R1001 Redlink Wireless Focuspro Thermostat Kit, 2 Packs

EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.

Check Stock

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..

Check Stock

Adafruit ItsyBitsy M4 Express Featuring ATSAMD51

The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..

Check Stock