ReviewsNetwork Switch Unmanaged

Reidubo 6 Port Ethernet PoE Switch with 4-Port PoE, 2 Uplink Port, 100Mbps, 75W, Unmanaged, Plug and Play, Extend & VLAN(Compatible with TP-Link &Ubiquiti Access Point-AP WIFI6)

  • ...e needed,which makes the PoE Switch simpler and lighter. Ideal for PoE IP Camera, Access Point, IP Phone and other PD devices..4KV lightning protection design allows your products and equipment to operate stably even in bad weather. Supporting IEEE802.3af/at PoE Protocol, with per port output power of 15.4W/30W..
  • 【Unmanaged Plug and Play &Multiple installation options】Reidubo PoE Switch support automatically detect devices, just plug in the power cord and network cable.Easy setup with no software installation or configuration needed.Supports desktop, wall or rack placement.It can be installed in office, home, and commercial locations, it is the good choice for high bandwidth requirements.
  • 【Intelligent PD Detection& QoS function】The PoE switch will automatically identify whether the device connected to the port needs power supply. If it is a non-poe device that does not require power,the power of the port can be automatically turned off, which can protect the non-POE device from damage.When the poe switch is carrying full traffic, Quality of Service(Qos) optimizes network management which make the PoE Switch prioritize the transmission of important content on 1-2 ports.
  • 【Extend & VLAN Mode(E+V)】In standard mode, all PoE ports are able to co....
Check Stock

MokerLink 48 Port Gigabit Ethernet Switch, Dual Power Supply, Fanless Metal Rackmount Unmanaged Plug and Play Network Switch

  • Gigabit Ports: 48 gigabit ethernet ports, switching capacity is 112Gbps, each port can reach 1G rate at the same time, with higher data throughput. 8K Mac address table, more devices can be connected and can be used in large networks.
  • Dual Power Supply: built-in two identical power supplies form redundant backup. If one fails, the other takes over immediately, with higher reliability..
  • Easy to Use: Unmanaged Plug and Play, just plug in the power cord, connect the ethernet cable to your device, can be used without configuration..
  • Stable and Quiet: Durable Metal housing, fanless silent, double side cooling holes, LED indicator lights, stable operation, easy to maintain network status.
  • Widely Used: desktop or rackmount placement, widely used in home/business/data network, such as IP cameras, Wireless Access Point, Computer Networks devices, switch and router data transmission etc..
Check Stock

YuanLey 5 Port Gigabit PoE Switch with 4 Port PoE+ 1000Mbps, 802.3af/at 78W Built-in Power, Fanless Metal Unmanaged Plug & Play

  • [All Gigabit Ports] Includes 4 Gigabit POE ports, 1 Gigabit UpLink Ethernet port, all ports up to 100/1000Mbps speed, has excellent network performance..
  • [78W High PoE Power] Support IEEE 802.3af/at PoE power supply. The whole power is 78W, up to 30W per port. Suitable for poe power supply for multiple devices..
  • [Unmanaged Switch] All ports support PoE, and support automatic detection, can connect POE and non-POE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and Play, no configuration required, can be easy installed..
  • [Extend Function] When the extend mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety..
  • [Wide Applications] High Power, Built-in power supply. Compact design. Durable Metal. Bilateral heat dissipation. LED activity indicator lights. Can be widely used in security monitoring, computer networks, wireless coverage, office and home networks, etc.. Aslo we provide the best after-sale sevice, 100% Satisfaction..
Check Stock

48 Port Gigabit PoE Switch Unmanaged with 48 Port IEEE802.3af/at PoE+@400W, 2 x 1G SFP, NICGIGA 50 Port Network Power Over Ethernet Switch, Desktop/Rackmount

  • 48-port Gigabit PoE+ switch with 48 PoE+ 10/100/1000 Mbps RJ45 ports, 2 Gigabit uplink SFP ports. SFP ports can provide more bandwidth and connect different devices such as routers, NVRs, etc..
  • Supporting IEEE 802.3af/at, each port provides up to 30W of power and a total PoE power budget of 400W. Widely used in HD IP cameras, IP phones, wireless access points, computer network equipment and other scenarios. 【Please note: not support passive PoE.】.
  • 4KV lightning protection design can protect products and equipment from damage even in bad weather. With industrial-grade fan and metal shell to ensure good heat dissipation and stability of the device. Supports desktop and rack mounting (built-in mounting ears)..
  • Unmanaged plug and play, support power detection function, automatic detection of PD devices, compatible with non-POE devices to provide data connection, no software or configuration required, support automatic MDI/MDIX and non-blocking data forwarding..
  • Every NICGIGA PoE switch is rigorously tested for reliability, quality and performance. We provide a one-year warranty and lifetime technical support for the entire product..
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • ...ort PoE Switch: Unmanned PoE switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 Gigabit Ethernet Uplink port, 4 PoE+ ports providing up to 30W per port, total PoE power budget 65W(Include 48V 1.35A external power supply).
  • Power Over Ethernet, Plug And Play: Compliant with IEEE 802.3af/at POE standard, this gigabit unmanaged poe switch 4 port can automatically detect and identify PD devices that comply with the standard and supply them with power through the network cable. Plug and play, easy setup with no software configuration required. It can meet the POE power supply requirements of security monitoring, teleconferencing systems, wireless coverage and other scenarios..
  • 300 Meters Extend Transmission: Automatically detect the transmission distance and adjust the transmission rate, extend up to 300m(980ft) data and power PoE transmission range (Speed will drop to 10 Mbps). For better result over long distances transmission, use cat5e cables or above..
  • PoE Auto Recovery: This 4 port gigabit poe switch equipped with professional poe chip, it can intelligently detect the data exchange between the poe port and the terminal device. When an abnormality is detected, it will automatically restart and return to normal without affecting other ports, reducing ma....
Check Stock

24 Port Gigabit Ethernet PoE Switch with 2 Uplink Gigabit Port & 2 SFP Port, YuanLey Unmanaged 24 Port PoE+ Network Switch, Rackmout, Build in 400W Power, Support 802.3af/at, Plug and Play

  • 【28 Port Gigabit PoE+ Switch】Total Max 400W internal power budget, up to 30W per PoE port, add-on 2 gigabit uplink port, 2 SFP port. IEEE802.3af/at compliant, automatically detects and identifies PD devices.Support AI Watchdog intelligent detection. Automatically restart the disconnection devices to make operation and maintenance more easier..
  • 【VLAN Switch】PoE ports will be isolated respectively but can communicate with uplink port,Better Network Bandwidth up to 56 Gbps with higher Security. Ideal for PoE IP Camera, EAP, Access Point, IP Phone and other PD devices..
  • 【6KV Lightning Design】Protect the product and equipment not be damaged even in bad weather. Sturdy Metal Housing supports Desktop or Rack Mount in many different usage scenarios..
  • 【Unmanaged Plug-and-Play】Easy to use and simple set up with no software or configuration needed. Supports auto MDI/MDIX and Non-Blocking Data Forward..
  • 【Customer Service&Technicoal Support】PoE switches are rigorously tested for reliability, quality, and performance. We supply a year warranty for whole products and lifetime technical support..
Check Stock

16 Port PoE Switch, 16 PoE+ 100Mbps Ports with 2 Gigabit Uplink Ethernet Ports, 1 Cambo SFP, Unmanaged Plug and Play, Each Port Up to 30W, High Power Total Budget 300W, 803.af/at Compliant, Rack Mount

  • 【PLUG AND PLAY】16 x 10/100Mbps PoE ports and 2 gigabit ethernet uplink ports and 1 SFP port unmanaged PoE switch, easy setup with no software installation or configuration needed. Does not have IP address or web interface..
  • 【HIGH PERFORMANCE】 Compliant with IEEE 802.3af/at Network protocol standard, supports PoE power up to 30W for each PoE port(Total of 300W PoE power budget).Compact & Sturdy Metal Housing design makes it safe to use in various environments.
  • 【STANDARD POE SWITCH】PD Detection, Automatically detect and provide required power for your PoE devices and protect your non-PoE equipment from being damaged. PoE Extension data transmission up to 600ft long distance if needed (Transmission Speed will be reduced to 10Mbps if extend function is operating, must use high quality cable).
  • 【Sturdy Metal Case】Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
  • Note: Do not support passive 24V PoE device E.g. ubiquiti access point.
Check Stock

MokerLink 18 Port Gigabit PoE Switch, 16 Gigabit PoE+ Ports, 2 Gigabit Uplink, 250W IEEE802.3af/at, Metal Rackmount Unmanaged Plug and Play Ethernet Switch

  • 18 Gigabit Ethernet Ports: Includes 16 Gigabit POE+ ports and 2 Gigabit UpLink. All port support 10/100/1000Mbps, high speed transmission.
  • 2 uplink, can be more flexible to connect to different network devices, such as routers, NVRs, servers, etc..
  • High POE Power: Maximum support 250W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*.
  • Unmanaged Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: The traffic are isolated from PoE Port 1-16,just only communicate with the uplink port 17/18, reduce network congestion, increase bandwidth utilization and improve network security.
  • Widely Used: Small and compact size design. Durable Metal housing. LED indicator lights. Industrial fan ensure good heat dissipation. Widely used in home and business network, such as IP cameras, Wireless Access Point, Computer Networks devices, etc..
Check Stock

PoE Texas GPOE-8A | 8 Port Gigabit Passive 802.3af PoE Injector Without Power Supply

  • Instantly upgrade your network to PoE using this unmanaged PoE midspan injector with 8 PoE ports.
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
  • Passive Mode A power and data delivery compatible with IEEE 802.3af devices like Cameras, IP phones, Wireless Access Points and More.
  • Power Supply NOT included - Use with a 48-56v DC power supply for IEEE 802.3af applications.
  • Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

PoE Texas 12 Port Gigabit PoE Injector with 48 Volt 60 Watt Power Supply for 802.3af Devices

  • Instantly upgrade your network to PoE - Unmanaged PoE midspan injector with 12 PoE ports.
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough.
  • Power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af devices.
  • Includes 48 volt 60 watt UL approved power supply for a shared budget of 60 watts.
  • Backed by 1 year warranty - For expert technical support from Austin Texas, please call 512 479 0317.
Check Stock

TEROW 12 Port Gigabit PoE Switch | Unmanaged Ethernet Switch with 8 Port PoE(30W Each)+2 Uplink+2 SFP Slots Ethernet Splitter with IEEE 802.3af/at | Plug & Play | Fanless Housing | Sturdy Metal

  • ...dapts to various harsh working environments. Built-in protection circuit, when a short circuit or overload occurs, the port will automatically fuse to protect the safe operation of the switch and other port equipment, and the power supply will be restored after the danger is eliminated..
  • 【Built in 120W Power】The unmanaged network switch has a built-in 120W power supply, and each PoE port can provide 30W power. The ethernet splitter supports 12-port full Gigabit transmission speed, including 8 10/100/1000M POE ports, 2 Gigabit uplink ports and 2 SFP ports. It has extremely fast data processing capabilities and supports 100M remote transmission..
  • 【Plug & Play】Simple set up with no software to install or configuration needed. Each port supports MDI/MDIX auto-flip and duplex/rate auto-negotiation. And with no configuration necessary making it perfect for home/small office and small-medium businesses. We will provide you with unconditional refund within 30 days to let you have better shopping experience. If you have any questions, please feel free to contact us..
Check Stock