ReviewsNetwork Topology

(2) JBL Pro JRX215 15″ 2000w PA/DJ Speakers+Powered 12-Channel Mixer+Stands

  • ...ipod Speaker/Lighting Stands+(2) 20 Foot 1/4″-SpeakOn Cables.
  • Features of JRX215:, JRX215 15″ Two-Way Sound Reinforcement Loudspeaker System, JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil, JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver, Advanced network topology crossover design, High-voltage capacitors and inductors with massive cores and heavy gauge wire, Progressive Transition high frequency waveguide, 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
  • Details:, Power Rating : 250 W / 1000W, Frequency Range (-10 dB) : 41 Hz – 18 kHz, Frequency Response (±3 dB) : 59 Hz – 13 kHz, Sensitivity (1w/1m) : 99 dB SPL, Nominal Impedance : 8 ohms, Recommended Amplifier Power : 250 W to 500 W into 8 ohms, Maximum SPL: 129 dB, Nominal Dispersion : 90º x 50º, Crossover Frequency : 2.2 kHz, Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in), Weight : 27.4 kg (60.5 lb).
  • Rockville RPM109 12 Channel 4800w Powered Mixer, 7 Band EQ, Effects, USB, 48V , RMS Power Output:, …..600w x 2 @ 4 Ohm, …..450w x 2 @ 8 Ohm, …..1200w x 1 @ 8 Ohm, Program Power Output:, …..1200w x 2 @ 4 Ohm, …..900w x 2 @ 8 Ohm, …..2400w x 1 @ 8 Ohm, Peak Power Output:, …..2400w x ....
Check Stock

XTOOL D9 Automotive Diagnostic Scan Tool with 3 Years Updates($900 Value), 2023 Newest, CAN FD & DoIP, Topology Mapping, 42+ Services, ECU Coding, Bi-Directional Control, All Systems Diagnostics

  • 【Smart Diagnostic System】XTOOL D9 is a 2023 new released 9.7” smart diagnostic tool featured OE level all systems diagnostics, Module Topology Mapping, full bi-directional controls, 35+ special functions, ECU coding capabilities, support CAN FD/DoIP/RP1210/OBDII protocol vehicles, comes with Complete Connector Kit and can work with key programmers, inspection camera to extent capabilities. NOTE: Please reach us with VIN # via xtoolofficial @ hot mail c om to check compatibility before purchase!.
  • 【Module Topology Mapping】XTOOL D9 intelligent diagnostic computer comes with Module Topology Mapping that displays interrelationships among various vehicle modules and views faulty modules in one glance to reduce guesswork performing all systems scan and improve diagnostic efficiency by 60% for automotive technicians, mechanics, car dealers and advanced DIY mechanics. NOTE: Software already released for GM, for Ford, for Toyota, for Honda, for Nissan, for Mazda and for BMW. More to come..
  • 【ECU Coding + Programming】XTOOL D9 ECU Programming & Coding tool can perform Offline Programming on Ford, Lincoln, Mazda vehicles, to update ECU software/firmware, program....
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • ...-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca jack to feed the next amp..
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 140x2 RMS @2 Ohms, 50x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you ....
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 3000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 3000 Watt Car Amplifier has a power rating distribution as followed 160x2 RMS @2 Ohms, 60x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you ....
Check Stock

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 Watts Car Amplifier has a power rating distribution as followed 280x4 RMS @2 Ohms, 50x4 RMS @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you....
Check Stock

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 1500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 1500 Watts Car Amplifier has a power rating distribution as followed 200x4 RMS @2 Ohms, 40x4 RMS @2 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you....
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 5000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 5000 Watt Car Amplifier has a power rating distribution as followed 330x2 RMS @2 Ohms, 105x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you....
Check Stock

LAUNCH X431 PAD VII, 2023 J2534 Reprogramming Tool, ECU Online Coding, Topology Map Intelligent Diagnostic Scanner, 2 Years Free Update, Upgraded of X431 PAD3/ V+, 50+ Services, Bi-Directional Control

  • 【LAUNCH X431 PAD VII, 2023 Top Diagnostic Scanner】 The latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 30+ car brands (the most on market), ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 50+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII is a worthwhile investment for repair shops and mechanics..
  • 【Huge-Upgraded ECU Programming & Coding】 Beyond the reach of most competitors, LAUNCH X431 PAD VII features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools.
  • 2) Programming offline or online, manual or automatic to meet more needs.
  • 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality d efect firmware. Coding features: Recode ECU Data, Personalization, and loads of more..
  • 【LAUNCH X431 PAD VII, 50+ Services & Topology】 LAUNCH X431 PAD VII bidirectional scan tool has 50+ service functions, like Oil Reset/ABS Bleeding/Injector Coding/AdBlue Reset … to win more business. Topology mapping checks DTCs and all-system communication status visually in....
Check Stock

(2) JBL JRX215 1000w 15" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer

  • ...er w/USB, Effects/14 XDR2 Mic Pres. : JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil.
  • JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
  • 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50.
  • Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.....
Check Stock

HIFIMAN HE-R9 Dynamic Closed-Back Over-Ear Headphones with Topology Diaphragm, Wired/Wireless, W/WO Bluemini R2R (Wired)

  • Best-sounding Dynamic Drivers: High sensitivity thanks to HIFIMAN’s use of a rare earth magnet.
  • Topology diaphragm for detailed high frequency response to 35kHz. The “Topology Diaphragm” refers to the diaphragm with a special Nano particle coating applied to its surface. By carefully controlling the diaphragm surface structure you can yield different results in acoustic performance to a degree previously unobtainable..
  • Bluemini R2R (User Separate Purchase or Come with HE-R9 Wireless Version): R2R Structured Bluetooth DAC and Amplifier.
  • Small but Mighty: HYMALAYA MODULE, HIFIMAN Custom Created DAC.
  • Ultra-small, highly efficient energy consumption, exceptional high-resolution wireless audio..
  • Elegance Outside, Strength Inside: The exterior of the headband is covered by high-quality leather, giving it a soft and elegant appearance. Inside, there is high-grade memory foam, selected to achieve the most comfortable fit and elasticity. The headband skeleton itself is made of solid steel. The structure is both lightweight and strong, robust yet delicate, and designed to convey detail and musicality that is unmatched in the market..
  • Large Ear Cups for Superior Acoustics: The crimson red ear cups are large, with internal space that hel....
Check Stock