ReviewsNhou Oil Undercoating

Fluid Film Undercoating Spray Gun Special Coating System, 1 Liter Reservoir Tank, Spray Nozzle, 22

Durable pneumatic air application gun that's excellent for applying automotive rustproofing with the two wand nozzle extensions and rubberized undercoating, chip guard, truck bed liner, and other general-purpose coatings without the extension. Gun can be used with oil, solvent, and water-based materials..
Precisely machined light weight well-balanced gun. Can be used for applying different viscosity coatings and various textures. This gun is great for use applying Herculiner and all other single and two component sprayable truck bed liner coatings..
Gun includes 2 attachable 22" long flexible extension wands. One wand has a multi-directional nozzle for applying rustproofing coatings into hard-to-reach areas and inside hollow frames, and the second wand has a straight single-direction nozzle..
Applicator gun has a die-cast aluminum alloy body with an easy grip trigger handle, plus an air pressure regulator with gauge. Gun also includes a 25 ounce suction feed aluminum fluid cup with cup assembly..
Buy with confidence, if you're not satisfied with this item at anytime within the first year of purchase, we'll provide a refund or replacement..

Check Stock

Signature Hardware 948495 Cypress 34\ Undermount 60/40 Double Basin Stainless Steel Kitchen Sink

Boasting a highly functional design, the 32” Cypress double-bowl sink features a large basin for washing dishes and a smaller basin for prep work. A low center divide allows for large pots and pans to be maneuvered easier. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and cleaning dishes, while the undercoating prevent condensation buildup in the cabinet below..
Covered under Signature Hardware's limited lifetime.
Undermount installation – sink will install under the counter top.
It is recommended to have the sink at the job site before cutting cabinet or counter top.
Sound absorption pads on the underside of sink.
Has an undercoating to prevent condensation buildup.
Basin Dimensions (Left): 18-1/4" L x 19" W x 9" D.
Basin Dimensions (Right): 12-1/8" L x 19" W x 9" D.

Check Stock

Signature Hardware 948475 Sitka 25\ Drop In or Undermount Single Basin Stainless Steel Single Hole Kitchen Sink

Ideal for a busy kitchen, the 25" Sitka stainless steel sink can handle the demands of frequent use. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A pre-drilled mounting hole on the back rim accepts your choice of single-hole faucet..
Covered under Signature Hardware's limited lifetime.
Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
It is recommended to have the sink at the job site before cutting cabinet or counter top.
Sound absorption pads on the underside of sink.
Has an undercoating to prevent condensation buildup.
Basin Dimensions: 22-1/4" L x 17" W x 10" D.

Check Stock

Signature Hardware 948490 Calverton 30\ Drop In or Undermount Single Basin Stainless Steel Kitchen Sink

The 30” Calverton Stainless Steel Sink features easy-to-clean, rounded corners within its sizable bowl. This durable basin is made of 304-grade stainless steel that requires very little maintenance. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A rear-center drain location provides more room for food preparation or dish cleaning without blocking the drain..
Covered under Signature Hardware's limited lifetime.
Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
Single basin design for maximum workspace.
It is recommended to have the sink at the job site before cutting cabinet or counter top.
Sound absorption pads on the underside of sink.
Has a undercoating to prevent condensation buildup.
Sink Length: 29-3/4" (from left to right).
Sink Height: 10-1/8" (from top to bottom).
Basin Dimensions: 27-11/16" L x 16" W x " D.

Check Stock

TCP Global Air Undercoating Spray Gun with Suction Feed Cup - Apply Sprayable Truck Bed Liner Coating, Rubberized Undercoat, Rust Proofing, Chip Guard Paint - Pneumatic Automotive Application Sprayer

Durable pneumatic air application gun that’s excellent for applying automotive rust proofing, rubberized undercoating, chip guard, truck bed liner and other general purpose coatings. Gun can be used with oil, solvent and water-based materials..
Precisely machined light weight well-balanced gun that can be used for applying different viscosity coatings and various textures. This gun is great for use applying Herculiner and all other single and two component sprayable truck bed liner coatings..
Applicator gun has a die-cast aluminum alloy body with an easy grip trigger handle..
Gun also includes a 25 ounce suction feed aluminum fluid cup with cup assembly..
100% Satisfaction Guarantee: Buy with confidence, if you’re not satisfied with this item at anytime within the first year of purchase, we’ll provide a refund or replacement..

Check Stock

30 Inch Drop In Kitchen Sink Stainless Steel - BoomHoze Single Bowl 16 Gauge Top Mount Kitchen Sink Handmade Deep Kitchen Sink Basin

✔Indestructible & Durable Construction: The Sink is constructed by 16 gauge T-304 stainless steel for exceptional resistance to corrosion, rust, and scratches. Added R10 design could let your wiping reach to each corner. Easy to clean and long-lasting..
✔Heavy Duty Undercoating & Thick Rubber Padding: Extra thick rubber dampening pads cover over 80% of sink base to absorb noise. And heavy duty stone guard undercoating to prevent condensation and protect kitchen cabinets..
✔Fast & Complete Drainage: Visible X-shaped water guideline on the slightly sloped bottom of topmount kitchen sink leads to fast and complete drainage, no blockage. Besides, deep single bowl prevents splashing from happening..
✔Sink Dimension: 30" x 22" x 10" (minimum cabinet size is 33") | 10mm radius slightly curved inside corners for easy cleaning..
✔Package Included: Box comes with stainless steel kitchen sink, roll-up dish drying rack, bottom rinse grid, 3.5" basket strainer drain, cutout template and topmount installation clips..

Check Stock

Signature Hardware 948483 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel Single Hole Kitchen Sink

Offering a pair of offset basins, the 33" Sitka double-bowl sink brings separation to your kitchen's workspace. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A pre-drilled mounting hole on the back rim accepts your choice of single-hole faucet..
Covered under Signature Hardware's limited lifetime.
Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
It is recommended to have the sink at the job site before cutting cabinet or counter top.
Sound absorption pads on the underside of sink.
Has an undercoating to prevent condensation buildup.
Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.

Check Stock

BoomHoze Matte Black Bar Sink Drop In - 15 x 20 x 10 Inch Stainless Steel Topmount Kitchen Sink Drop-In 10 Inch Deep Single Basin Bar Prep Sink with Bottom Rinse Grid

Indestructible & Durable Construction: this sink is constructed by 16 Gauge T-304 Stainless Steel(1.5mm thick) for super sturdy and extremely durable..
Black NANO-PVD Finished: An innovative NANO-PVD surface treatment for super hydrophobic, anti-physical scratching and self-cleaning, ensuring no water trace, oil & stain resistance, and corrosion & rust resistance. Easy to clean and long-lasting..
Noise Minimization and Anti-condensation: Extra thick rubber dampening Pads & heavy duty stone guard non-toxic undercoating to minimize noise and reduce condensation..
Sink Dimensions: 15"L x 20"W x 10"D | Standard 3.5" drain openings with removable basket | 10mm radius slightly curved inside corners for easy cleaning..
Package Include: stainless steel black bar sink, stainless steel dish grid, strainer set, mounting hardware – LIFETIME LIMITED WARRANTY..

Check Stock

Signature Hardware 948481 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel 4-Hole Kitchen Sink

The 33" Sitka double-bowl sink has offset basins that provide separate working spaces. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
Covered under Signature Hardware's limited lifetime.
Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
It is recommended to have the sink at the job site before cutting cabinet or counter top.
Sound absorption pads on the underside of sink.
Has an undercoating to prevent condensation buildup.
Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
Faucet Centers: 8" (distance between the installation holes for the faucet handles).

Check Stock

Signature Hardware 948492 Calverton 32\ Drop In or Undermount 40/60 Double Basin Stainless Steel Kitchen Sink

Featuring a large basin for washing dishes and a smaller basin for prep work, the 32” Calverton Double-Bowl Sink is functionally designed. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below..
Covered under Signature Hardware's limited lifetime.
Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
Sink features dual basins with a 60/40 split.
It is recommended to have the sink at the job site before cutting cabinet or counter top.
Features a low center divide for maneuvering large pots and pans.
Sound absorption pads on the underside of sink.
Has an undercoating to prevent condensation buildup.
Sink Length: 31-3/8" (from left to right).
Sink Width: 20-3/8" (from front to back).
Basin Dimensions (Left): 13-1/2" L x 15-5/8" W x 7-1/2" D.
Basin Dimensions (Right): 14-7/8" L x 18-1/4" W x 10" D.

Check Stock

Air Undercoating Spray Gun with 750ml Suction Feed Cup, Apply Sprayable Truck Bed Liner Coating, Rubberized Undercoat, Rust Proofing, Chip Guard Paint - Pneumatic Automotive Application Sprayer

Durable pneumatic air application gun that's excellent for applying automotive rust proofing, rubberized undercoating, chip guard, truck bed liner and other general purpose coatings. Gun can be used with oil, solvent and water-based materials..
Precisely machined light weight well-balanced gun that can be used for applying different viscosity coatings and various textures. This gun is great for use applying Herculiner and all other single and two component sprayable truck bed liner coatings..
Applicator gun has a die-cast aluminum alloy body with an easy grip trigger handle, plus an air pressure regulator with gauge..
Note: Gun accepts 1 quart bottles and cans with 1.75 inch standard U.S. outside diameter threads. Gun does not fit UPOL or Custom Coat branded 1 liter bed liner bottle threads..
Buy with confidence, if you're not satisfied with this item at anytime within the first year of purchase, we'll provide a refund or replacement..

Check Stock