ReviewsNi Alloy Tube

Heyiarbeit RC Antenna Tube Green with Green Mount and Cap for RC Boat 5pcs

  • 【Parameters】- Tube Inner Diameter: 2mm/0.08".
  • Material: Plastic Tube, Aluminum Alloy Mount.
  • 【Good Material】-The antenna base is made of high-quality aluminum alloy material, waterproof, wear-resistant, corrosion-resistant, sturdy and durable.
  • The antenna tube is made of high-quality plastic, sturdy and durable, and has good flexibility, It protects the fragile receiving antenna and protects the antenna from damage, Won't break in a collision.
  • 【Easy to Use】-This antenna tube is easy to trim and use, you can cut it to fit the size, well-made, durable, very suitable for protecting your antenna.
  • antenna base can be used as a good support for the transmitting antenna, which helps to fix the receiving antenna at a proper angle to obtain the best signal.
  • 【Application】- RC antenna mount is compatible with DIY RC model, such as RC boat, RC vehicles and so on.
  • 【Package Contents】- 5 pcs x RC Antenna Mount +5pcs x Antenna Tube.
Check Stock

Dragon Fire Performance Ignition Tune Up Kit Spark Plug Wire Set & Iridium Spark Plugs For 1999-2017 Chevrolet GM Chevy LS LSX LS1 LS2 LS3 LS6 LS7 OEM Fit Kit

  • MANUFACTURER: Dragon Fire Performance MODEL: Tune Up Kits.
  • SPARK PLUGS: Latest Evolution Iridium High Performance | PLUG WIRES: 10mm / 100 Ohms.
  • Compatible with 1999-2017 Chevrolet LS Series V8 (Round or Square Coil).
  • FEATURES: Spark Plugs: Iridium for industry leading performance in high temperature engines with quicker acceleration and longer life. Plug Wires: High Heat Silicone - Ni-Chrome Alloy (Ni-Cu) – Kevlar Core - High Tensile Strength Fiberglass Protection Mesh - Rated to 600°F - Long Service Life – Maximum Voltage: 80,000 VAC – Direct OEM Replacement.
  • WIRE LENGTHS – 8x10.5" / SPARK PLUGS - Full Set 8pcs (Pre-Gapped).
Check Stock

40x40x20mm Super Strong Neodymium Block Magnet, N52 Permanent Magnet Disc, The World's Strongest and Most Powerful Rare Earth Magnets - One Piece

  • HIGH QUALITY- Made from strong neodymium-iron-boron alloy (NdFeB) and have a stylish nickel coating (Ni-Cu-Ni) with an appealing silver surface --- All the magnets are magnetized axially and have a maximal operating temperature of 80 degrees Celsius..
  • EXTREME DURABILITY - Nickel-Copper-Nickel triple layer coating for superior durability..
  • MULTIPLE USES - These Magnets are Ideal for DIY craft projects,science project magnets. Use these rare earth magnets for anything, including finding studs in your wall, fastening, lifting,hanging objects, various projects & presentations, education, & more..
  • DIMENSION - Diameter 40mm x thickness 20mm(approx.1.57"x0.79" ).Tolerances: 0.2mm x 0.2mm..
  • 100% MONEY-BACK GUARANTEE! If these magnets don't live up to your expectations, don't worry. You can send them back for a full, complete refund of every penny you paid! You take NO RISK when you purchase with us today!.
Check Stock

RUNCL Fishing Hook Remover, Long Nose Hook Extractor, Fish Release Tool for Saltwater/Freshwater, Ice Fishing Dehooker, 10.6/13.6 Inch

  • 【10.6" Aluminum Alloy Long Nose Fish Hook Remover】: Our this fishing hook remover equipped with longer nose than needle nose pliers, can reach deep into the fish mouth, never worry about injury. The aluminum alloy tube is much more firm and durable than plastic ones. Size: Total Length: 10.6inch(27cm), Tube Length: 9inch(23cm).
  • 【Squeeze Out Fish Hook Extractor】: The fishing hook extractor constructed with spring-loaded trigger handle, makes it more convenient to take off fishing hooks with only just one hand even in a wet or cold situation, easy to work with.
  • 【Stainless Steel Rounded Hook】: The removal hook is designed to be more rounded, less harm to fish mouth and fishing line. And there're two small groove on the tube opeing, help to fix the fish hook firmly and avoid slippage. Stainless steel material avoid rust and keeps a long last life time.
  • 【Widen Hollow Out ABS Handle】：Ergonomic design, features in widen handle with anti-slip rubber strips, offers a solid grip even with wet hands.
  • the hollow-out handle made of high strength ABS significantly reduces the weight without sacrificing strength and....
Check Stock

uxcell 304 Stainless Steel Capillary Tube Tubing 7mm ID 8mm OD 300mm Length 0.5mm Wall

  • Capillary Tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes..
  • Exceedingly demanded in precise apparatus or instruments,automatic instruments,eletronic parts,oil or gas plants and other industries..
  • Stainless Steel Tube is a good choice for most applications due to greater corrosion resistance and precision..
  • Alloy 304 stainless steel is one of the most common stainless steel and it is having nickel and chromium alloy metal as non-iron constituents..
  • Please check the correct size before purchasing..
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

20Inch Bike Fat Air Fork Snow/Beach Bike Fork Double Shoulder Air Gas Suspension Magnesium & Aluminum Alloy Spread 135mm Fit 4.0’’Fat Tire

  • Material: Magnesium and Aluminum Alloy , sturdy and durable..
  • Size: Travel:140mm, straight tube : Aluminum alloy Φ28.6x230mm (1-1/8), Spread 135mm..
  • Features: Rebound adjust, Lock-out system, Air spring..
  • Steady: The inner tube diameter is 34mm, stronger than the previous 30/32mm inner tube, steady and sturdy..
  • Suitable for:20 inch Snow/ Beach Bike - 4.0" Tire, E-Bike, etc..
Check Stock

AIRCAT 1431: 1/2-Inch Impact Wrench 1,000 ft-lbs

  • Power and Performance: 800 ft-lbs of maximum torque.
  • Twin Hammer Mechanism: Breaks loose stubborn, rusty lug nuts at low decibel levels.
  • Ni-Cr-Mo Alloy Steel: Triple heat treated mechanism parts and anvil provide ultimate reliability.
  • Impact Wrench: Ergonomic handle for the user's ultimate comfort.
  • AIRCAT Line: The most significant advances in the performance of pneumatic power tools.
Check Stock

Yaheeda Tube Bender Kit,90 Degree with Reverse Bender for Copper Aluminum Soft Steel Brass 1/4” to 7/8”, HVAC Refrigeration Industry Maintenance,Containing Tube Cutter & Deburrer

  • Our manual tube bender has a compact structure, which allows it to function normally even in limited spaces. The body is made of alloy aluminum, durable and light weight, can finish the bending tasks easily. Beside the tube bender, tube cutter and durring tool are also in the package, get multiple tools in one purchase..
  • This tube bender is not hard to assemble, there is an illustrated guidance of assembly and how-to-use in the package. No more screws or nuts means no worry about losing accessories. Assembly is easy, and using is even more easier, labor-saving and time-saving, can improve the working efficency vastly..
  • The maximum bend angle of this tube bender is 90°obversely and reversely. In the situation like facing wall or corner that obverse bending is not convenient, you can use the reverse bending mode to finish task without problem..
  • The tube bender is widely applicable for pipes at different O.D.s:1/4",5/16",3/8",1/2",5/8",3/4",7/8"(6mm,8mm,10mm,12mm,16mm,19mm,22mm).There are replacable bender heads in the package with percise size all made of alloy aluminium, durable and easy to use..
  • Our tube bender is compatible with copper,aluminium,thin steel pipes,widely useful in sanitation,HVAC,radiant floor heating,refrigeration AC system and hydruali....
Check Stock

FirstPower 3.7Ah12V Battery - Compatible with DEWALT 12V DW9071 DW9072 DC9071 DE9037 DE9071 DE9072 DE9074 DE9075 152250-27 397745-01 2-Packs

  • 【Battery Features】: NI-MH, 12V, 3.7Ah, 2Packs. Replace for all original 12V NI-MH& NI-CD battery model. Powers entire line of 12V NI-MH& NI-CD tools, allowing users to run multiple tools off of the same battery pack..
  • 【Compatible with Dewalt 12V NI-MH& NI-CD Tools】: Replacement battery, Not original. Fits current model 12V NI-MH& NI-CD tools and original charger. E.g: DW9071 DW9072 DC9071 DE9037 DE9071 DE9072 DE9074 ....
  • 【High Capacity & Easy to Install】: High capacity XRP battery has 25% more run-time than standard batteries. The same function and size as original 20V battery, so very easy install and it fits perfectly. Not tight or loose..
  • 【Charge Stable】: Top A grade NI-MH Battery Cells,Built-in protection against potential damage caused by overcharging, overheating and short-circuit protection. Not hot when charge. Tested by manufacturer to match Original & OEM product..
  • 【NOTE】: NOTE: Please don't over charge the battery.
  • Cool down the battery before recharge it. Store it in a clean, dry, cool place away from heat and metal....
Check Stock

Sudaderas con Capucha para Mujer Sudadera con Capucha suéter Chaleco suéter bebé niña Sudadera con Capucha Sudaderas Blue

  • capucha suéter con capucha mujeres sudaderas con capucha para niñas Womens Pullover Sweatshirts Casual Crew Neck Long Sleeve Color Block Tops Blouse Sweatshirt Teen Girls girls sweatshirt long sleeve top sweater cute sweater for women dance clothes for little girls sweater for teen girls Sudadera para niñas suéter de manga larga suéter lindo para mujeres ropa de baile para niñas suéter para niñas Women Long Sleeve Round Neck Sweatshirt USA Print Pullover Loose Tunic Shirts Blouse Tops.
  • Sweatshirt Teen Girls clothes for teens clothes teen girls crop top juniors crop top hoodie for juniors top sweaters for women Ropa para adolescentes ropa para niñas adolescentes crop top juniors crop top hoodie para juniors top sweaters para Women Loose Lantern Sleeve Sweater Casual O Neck Sweatshirt Pullover Cozy Ladies Coat Suéter flojo de la manga de la linterna de las mujeres Sudadera con cuello en V informal Sudadera con jackets for women ladies sweater crop top hoodies crop top.
  • sweatshirt crop tops long sleeve cute sweaters for girls Chaquetas para mujer suéter de mujer crop top sudaderas con capucha crop top sudadera crop tops de manga larga Womens Hoodie Letters Long Sleeve Sweatshirt Pullover Tops Blouse Outerwear Sweatshirt Teen Girls flowy crop to....
Check Stock