ReviewsNibbler For Metal Roofing

Metal Roofing Screws 1000 10 x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

#10 Sheet Metal ROOFING SCREWS. Our metal roofing screws are galvanized for corrosion resistance..
1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

Check Stock

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
Non-toxic, eco-friendly, low VOC & made in the USA.
1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

Check Stock

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
Non-toxic, eco-friendly, low VOC & made in the USA.
4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.

Check Stock

New Metal Nibbler Drill Attachment, Electric Sheet Metal Cutter, Electric Drill Plate Cutter, Electric Drill Shears Attachment Cutter Nibbler

【Sharp And Durable】Electric drill plate cutter is made of high quality steel and iron, sharp and sturdy, and it supports double-head cutting, fast and time-saving. Anti-rust and corrosion resistant, not easy to break and deform, can be used for a long time..
【Cutting Range】The metal nibbler drill attachment is suitable for cutting flat sheet metal less than 1mm. This nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm)..
【Wide Compatibility】The Electric Drill Shears has a wide range of application and is compatible with most of the hand drills, lithium drills and impact drills in the market. It can be used to cut all kinds of metal plates, such as aluminum, steel, iron, copper and other alloy materials..
【Warm Remind】 We do not recommend cutting stainless steel and special high hardness alloy material, otherwise it will damage the machine. If stainless steel must be cut, the thickness of stainless steel must not exceed 0.5 mm..
【Package Contents】 The package includes 1 electric drill plate cutter (drill not included), 1 large wrench, 1 small angle wrench, 1 L-shaped wrench and 1 instruction manual. The blade is very sharp, so please be care....

Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

#12 Sheet Metal ROOFING SCREWS. Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.

Check Stock

Metal Roofing Screws: (250) 10 x 2\ Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
Metal Screws are painted to closely match many brands of metal roofing though color may vary.
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
#10 Sheet Metal roofing screws are galvanized for corrosion resistance.

Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
Metal Screws are painted to closely match many brands of metal roofing though color may vary.
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.

Check Stock

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..

Check Stock

VEVOR Sheet Metal Nibbler 380W, Electric Metal Nibbler 1800RPM High Speed Rotor 0.07in/1.8mm, Metal Nibbler Cutter w Replaced Blades Storage Case for Cutting Stainless Steel, Aluminium, Plastic

Suitable for Various Materials: The power shears & nibblers can cut up stainless steel, aluminum, plastic, or other metals. Steel Sheet: 0.5~1.8mm.
Excellent Cutting Capability: The metal nibbler cuts material at 1800rpm speed without sparking, leaving a burr-free cut edge. The nibblers can be spun 360 degrees to help you accomplish a wide range of cutting shapes..
Humanized Design: The handle is ergonomically designed, the slim body provides easy gripping. One-key button sliding switch for quick closing and continuous operation.
Complete Accessories: Our nibbler tool is equipped with a pair of replacement tool blocks, a wrench, a set of hook-type tools, two hexagon spanners, two carbon brushes, and comes with a toolbox for easy carrying..
Easy to Replace & Operate: The Cutting Blade and Guide block is easily replaced with a wrench to offer the cutting performance. The sheet metal nibblers are light and portable, effortless to use..

Check Stock