ReviewsNickel Copper Alloy Wire

25 Ft. 3/16 OD Copper Nickel Brake Line Tubing Coil and Fitting Kit, 25 Ft of 3/16' x 25'

Complete Brake Line Tubing Kit- Includes 1 Pcs 25 Feet 3/16" Copper Nickel Brake Line(0.028" Wall Thickness) & 16 Fittings(10 x 3/16” (3/8-24) Inverted Tube Nuts, 2 x 3/16” (7/16-24) Inverted Tube Nuts, 2 x 3/16” (1/2-20) Inverted Tube Nuts, 2 x 3/16” (9/16-18) Inverted Tube Nuts).
High Quality- This brake line coil is made from Copper-Nickel alloy. It is malleable, easy to bend and not easy to break. Designed by 0.028" wall thickness and anti-rust, more flexible and durable for use..
Widespread Application- 3/16 brake line tubing kit for use in fuel and transmission systems. It is also widely suitable for household, industrial and commercial uses..
Rust and Corrosion Proof- Our copper-nickel fuel tube line last longer than standard steel tubing. It won't rust, corrosion resistance..
Warranty- Our brake line meets all SAE and ISO specifications. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..

Check Stock

3PCS DIY Twisted Copper Wire Tool Winding Copper Wire for Jewelry Making, Artifact Handmade Antique Jewelry Accessories Mini Pin Vise Jewelry Making Tool (Tools&Copper)

★ Reliable Workmanship: Top quality, silver appearance, fine texture. The exterior of this tool is made of high-quality alloy, compact and firm, not easy to deform..
★ Double Ended Design: The twisting copper wire tool adopts a double-ended design, and the inner cores are made of copper. Each core has two ends, a total of four ends, the replacement & accessories of the core can clamp the copper wire or small tools within the range of 0.3-3.2mm..
★ Size Information: The size of the copper wire winding tool is approximately 10.5 cm/4.1 inches long. The size of the inner core is about 3.5 cm/1.37 inches long. This tool is small in size and easy to carry and store..
★ Value Packaging: In addition to the two jewelry wire making tools, there is also a roll of 12 meters long 0.3mm thick copper wire in the wire wrapping kit. With these jewelry making tools, you can make many beautiful handicrafts, such as beautiful antique hairpins, bracelets, necklaces and so on..
★ DIY Your Own Jewlery：Use this wire twisting tool to design and handcraft a unique gift as professional for your friends. Bring you a lot of diy jewelry fun and sense of accomplishment..

Check Stock

JRready ST6327 DT Deutsch Connector Kit, 2 3 4 6 8 12 Pin Gray Waterproof Electrical Connector with Size 16 Stamped Contacts, Seal Plugs and Deutsch Pin Removal Tool（Upgraded DRK-RT1), 106PCS

DT Connector Kit Package List: 1 set connector kit (includes 2 3 4 6 8 12 cavities), 35 pairs stamped terminals(pin socket), 10 pcs seal plugs, 1 pcs Deutsch connectors removal tool..
Deutsch Connector Materials: PA66 nylon, durable and waterpoof, convenient to connect and disconnect, suitable for long time use..
Pb-Free Stamped & Formed Contacts Materials: Copper(Nickel Overall, Wire Barrel Tin Plated), durable and waterpoof, convenient to connect and disconnect, suitable for long time use..
Upgraded Deutsch pin size: JRready Contact size 16 has a wider wire range for 14-18 AWG. We have extended the use of this product to the limit.Tinned Copper(Nickel plating and Tinned copper end). Can be connected by crimping and soldering, Increase solderability, corrosion resistance and reduce crimping resistance..
Versatility: JRready connectors suitable for various waterproof electrical connections of motorcycle, scooter, car, truck, quad bike, caravan, marine, jet ski, boats..

Check Stock

25 Ft. 3/16 OD Copper Nickel Brake Line, Rustproof Brake Line Tubing Coil and Fitting Kit, 3/16' x 25 Ft (Includes 16 Fittings)

〖Brake Line Tubing Kit〗- Includes 1 Pcs 25FT 3/16" Copper Nickel Brake Line(0.028" Wall Thickness) & 16 Fittings(10 x 3/16” (3/8-24) Inverted Tube Nuts, 2 x 3/16” (7/16-24) Inverted Tube Nuts, 2 x 3/16” (1/2-20) Inverted Tube Nuts, 2 x 3/16” (9/16-18) Inverted Tube Nuts).
〖Rust and Corr-osion Proof〗- Our copper-nickel fuel tube line last longer than standard steel tubing. It won't rust, corr-osion resistance..
〖Premium Material〗- This brake lines are made from Copper-Nickel alloy. It is malleable, easy to bend and not easy to break. Designed by 0.028" wall thickness and anti-rust, more flexible and durable for use..
〖Wide Application〗- Very suitable and compatible for use in fuel and transmission systems. It is also widely suitable for household, industrial and commercial uses..
〖After-sales Service〗- Our brake line meets all SAE and ISO specifications. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..

Check Stock

Automatic Electric Wire Stripping Machine, Scrap Cable Stripper for Scrap Copper Recycling, Compact & Portable Aluminum Alloy Construction, Extra Blade Included, 1.5mm-25mm

ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use..
EASY OPERATION & WIDE COMPATIBILITY: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 0.06” (1.5mm) up to 0.98” (25mm)..
THE CROWN OF COPPER CABLE RECYCLERS: This wire stripping machine removes the plastic and rubber insulation from undamaged scrap wire - a must-have for recycling your copper cable..
1/4 HP SINGLE PHASE INDUCTION MOTOR: Motorized to save you time, effort, and money, it creates a fast stripping speed of 50 feet per minute, plus the hands-free design increases safety and convenience..
PERFECTLY PORTABLE: Measured at 9.4” x 12.6” x 12.6” and weighing only 33 lb, this cable stripper is portable and convenient to move around your workstation..

Check Stock

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.

Check Stock

Larsen NMO150-450-800 Tri-Band Nmo Antenna

0-6 GHz Motorola-style mounts for 3/4" holes..
Fully weatherized cable interface and a center pin that removes to convert it from a standard to a high frequency mount..
Zinc alloy body plated with copper and nickel. Nickel plated brass ring..

Check Stock

279838 Dryer Heating Element for Whirlpool Kenmore Dryer Thermal Fuse3392519(2Pcs) Thermostat 3977767 & 3977393&3387134 Replacement Parts Compatible Maytag

Upgrade: Our parts are made of heavy duty nickel-chromium alloy and reinforced coils. Our upgraded plating process eliminates coil overheating and short circuit.
279838: The heating element is a coiled wire made of nickel and chrome alloy, rated at 5400 watts and 240 volts, and has 2-5 / 16″ male terminals..
Tool: The coiled wire on the 279838 heating element receives and resists the controlled electrical dryer current, which allows the wire to heat up. The heat generated is used to dry the laundry in the dryer. In order to complete this repair, you need a 1/4 inch nut wrench and a needle nose pliers.
Compatible models: 279838、2438、279816、3387134，AP3094254、279838A，279838VP，3398064、8565652，AH334313，EA334313，PS334313，PS334313，EED4400WQ0，W10724237，EXP279838.
Best after-sales: For whatever reason, you are not satisfied, contact us. We will promptly give you a solution. Refund or deliver a new product to you. This is our responsibility. The Gorang team always provides buyers with a quality shopping experience..

Check Stock

Artistic Wire Silver Plated Tarnish Resistant Colored Copper Craft Wire, 24 Gauge / .51 mm

Uses: Perfect for wire wrapping jewelry. This high quality wire is available in many colors and gauges for a jewelry, craft or hobby project that requires a wire that holds it's shape..
Hardness: Artistic Wire is dead soft tempered wire that is malleable and shapeable. Easy to bend and holds its form..
Metal/Plating: Round copper wire plated with a layer of pure silver and a tarnish resistant color coating to resist discoloring, chipping, & peeling. REACH and RoHS compliant. Meets EU Nickel Directive..

Check Stock

Hsing 100W Concrete Vibrator Vibration Motor with Speed Controller, AC 110V 3600rpm Single Phase Power Concrete Vibrators for Shaker Table (100W + Controller)

[ Adjustable Eccentricity Block ] - The eccentric block is easy to adjust, multi-voltage, power optional, Meet all kinds of requirements according to different usage..
[ Pure Copper Enameled Wire Stator ] - The stator use high temperature resistant pure copper enameled wire, full copper winding, and adopts special vacuum dip coating process, Class F insulation grade.
[ High Quality Import Bearing ] - The bearing is import, Low noise, high efficiency, smooth operation, fast heat dissipation, low temperature rise, Long service life..
[ Aluminum Alloy Case ] - Aluminum alloy case, light weight, fast heat dissipation and low temperature rise, anti-oxidation and anti-rust coating connecting piece, excellent waterproof and insulation..
[ Widly Application ] - The small vibration motor can be widely applied in Mining, metallurgy, coal, electricity, construction, chemicals, medical equipment, food machinery, etc..

Check Stock

4LIFETIMELINES 25 ft 1/4 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, 16 Fittings Included, Inverted Flare, SAE Thread, 0.028 inch wall thickness

True copper nickel alloy non magnetic tubing - super easy bending and flaring, no tools necessary.
Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing.
Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
Lifetime warranty, we promise as long as the lines are installed correctly out lines will outlast the life of the vehicle.
Complete 1/4" Replacement Kit Includes 16 Fittings: 2 x 1/4” (7/16-24) Inverted Tube Nut, 10 x 1/4” (7/16-24) Inverted Tube Nut (Long), 2 x 1/4” (9/16-18) Inverted Tube Nut, 2 x 1/4” (1/2-20) Inverted Tube Nut.

Check Stock