ReviewsNickel Oxide

Michigan Drill 212C Series Cobalt Steel Extra-Long Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/4\ Size, 12\ Length (Pack of 1)

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • 135 degrees split point for nonslip starting on hard materials.
Check Stock

Drill America TSD Series M42 Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Threaded Shank, Spiral Flute, 135 Degrees Split Point, 1/8\ Size (Pack of 25)

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Featured with 135 degrees heavy duty split point and surface treated for drilling hard, tough, high tensile strength materials.
Check Stock

iexcell 1500 Pcs M3 x 4/6/8/10/12/16/20/25/30/35/40/45/50 Alloy Steel 12.9 Grade Hex Socket Head Cap Screws Bolts Nuts Washers Assortment Kit Black Oxide Finish

  • ✔ Includes 500 Pcs, 13 Sizes, M3 Hex Socket Head Cap Screws, Thread Pitch 0.5 mm, Thread Size ( Diameter) 3 mm, Head Diameter 5.5 mm, Head Height 3.0 mm, Thread Length From 4 mm to 50 mm.
  • Material of Screws: Alloy Steel 40Cr, Black Oxide Finish.
  • Strength Grade of Screws : 12.9 Grade, Hardness: HRC 39-44, Tensile Strength: 1220N/mm².
  • ✔ Includes 500 Pcs M3 Nuts to Meet Different Applications, Material of Nuts: Alloy Steel 10B21, Black Oxide Finish.
  • ✔ Includes 1 Pcs Hex Key, Hex Size: 2.5 mm, to Drive These Screws Conveniently and Easily, Material of Hex Key: Chrome-Vanadium Steel, Nickel Plated, Higher Strength, Anti-rust.
  • ✔ Includes 500 Pcs Φ3 Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged, Material of Washers: Alloy Steel 10B21, Black Oxide Finish.
  • ✔ Package: All These Screws, Nuts, Washer and Hex Key Packed In a Sturdy Easy-use Plastic Storage Box, Organized Conveniently and Easily.
Check Stock

iexcell 1500 Pcs M3 x 6/8/10/12/14/16/20/25/30/35/40/45/50 mm Alloy Steel 10.9 Grade Hex Socket Button Head Cap Screws Bolts Nuts Washers Assortment Kit Black Oxide Finish

  • ✔ Includes 500 Pcs, 13 Sizes, M3 Hex Socket Button Head Cap Screws, Thread Pitch 0.5 mm, Thread Size ( Diameter) 3 mm, Head Diameter 5.5 mm, Head Height 1.6 mm, Thread Length From 6 mm to 50 mm.
  • Material of Screws: Alloy Steel 10B21, Black Oxide Finish.
  • Strength Grade of Screws : 10.9 Grade, Hardness: HRC 32-39, Tensile Strength: 1040 N/mm².
  • ✔ Includes 500 Pcs M3 Hex Nuts to Meet Different Applications, Material of Nuts: Alloy Steel 10B21, Black Oxide Finish.
  • ✔ Includes 500 Pcs Φ3 Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged, Material of Washers: Alloy Steel 10B21, Black Oxide Finish.
  • ✔ Includes 1 Pcs Hex Key, Hex Size: 2.0 mm, to Drive These Screws Conveniently and Easily, Material of Hex Key: Chrome-Vanadium Steel, Nickel Plated, Higher Strength, Anti-rust.
  • ✔ Package: All These Screws, Nuts, Washer and Hex Key Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.
Check Stock

Pure Tone Mono Multi-Contact 1/4 inch Output Jack - Black Nickel

  • US Spec 3/8 x 32 threads per inch - 3/8 inch bushing thread length.
  • Highly conductive Black Nickel finish (not Black Oxide).
Check Stock

EZ on the Earth Battery Recycling Container Kit 1 Gallon Battery Recycling Pail pre-Paid Mail Back Recycle kit for Lithium Batteries and Other Dry Cell Batteries

  • UN approved battery recycling pail, 1-gallon.
  • Battery recycling kit includes all shipping and packing materials needed.
  • Acceptable batteries for this kit: Alkaline, Nickel Cadmium (NiCad), Zinc-Carbon (Zn) (more below).
  • Acceptable batteries (cont.): Rechargeable Lithium-ion (Li-Ion), Nickel-Metal Hydride (NiMH), Mercury, Silver-Oxide.
  • Properly recycling batteries keeps mercury and other hazardous substances out of the environment.
Check Stock

Seymour Duncan Invader Humbucker Set Electric Guitar Electronics

  • The Invader Set is the tried and true solution for guitarists who seek the heaviest metal tone imaginable. .
  • This crushing set of our Invader humbuckers delivers massive output for thick and heavy distortion..
  • Hand built in the Santa Barbara CA factory the Invader uses a three large ceramic bar magnets, oversized metal oxide poles, nickel silver bottom plate 4-conductor lead wire for multiple wiring options and is vacuum wax potted.
Check Stock

Hyper Tough 107-Piece 1/4", 3/8", 1/2" Drive Socket Set

  • General-purpose tools are ideal for most home projects.
  • Have machined jaws for extra strength and precision.
  • The ergonomically non-slip handles are sturdy, lightweight and comfortable.
  • Black-Oxide Hex key Metric and Nickel finished SAE color for easy distinguish.
Check Stock

Performance Tool W38790 11 pc. X-Trax SAE Hex Bit Set

  • Patented gripping edges work with standard recessed hex fasteners, or use at an angle to remove old, stripped, rusted or painted fasteners.
  • Chrome vanadium steel for strength and durability.
  • Chrome nickel and black oxide finish resists corrosion.
  • SAE sizes: 1/4 inch Dr. x 37mm: 1/16, 5/64, 3/32, 7/64, 1/8, 5/32 inch.
Check Stock

SUNJOYCO 69pcs 2 inch Quick Change Roll Lock Sanding Discs Set, Surface Contidioning Discs 1/4\ Pad Holder for Sander Die Grinder Accessories Sanding Disc Grind Deburr Strip Grind Polish Rust Removal

  • ...ou from worrying about falling off when using..
  • WIDELY USED: Our quick change disc is perfect for the surface prep, finishing, deburring and polishing of wood, plastic, pipes, carbon steel, cast iron, titanium, aluminum, brass, bronze, copper, or hardwoods as well as heat-sensitive materials such as stainless steel, nickel alloy or cobalt alloys..
  • HIGH COMPATIBILITY: With the 1/4" discs pad holder, this 2 inch quick change sanding discs set can be attached to 1/4 collet die grinders, rotary tools and drills. It is suitable for many grinding tools. Just make sure the size is right before purchasing..
Check Stock

Battery Tester with Meter Electric Voltage Tester for AA AAA C D N Button Cell Batteries

  • Battery type : AA, AAA,C, D, N, Button Cell , Lithium, Camera battery.
  • Voltage of battery: 1.5V,3V,6V,9V,12V,15V,22.5V.
  • Can test Alkaline, Carbon-zinc, Silver oxide, Lithium, Nickel cadmium and mercury batteries.
  • Test all common batteries to determine if they are charged or need replacement..
Check Stock