ReviewsNickel Tube Pipe

[5 in 1]Swaging Tool Copper Tube Expander Manual Copper Pipe Swage Too Expander Drill Bit Soft Copper tubing Tool bit with for HVAC Repairing Air Conditioner

Material:This Manual tube expander is bearing steel material, blackened surface treatment process to prevent pipe drill bit rusting..
Contains: 6pcs hexagonal handle tube expander + 5pcs bell mouth expander,Air Conditioner Copper Tube Expander Tool Drill Sets.
Specifications: 7/8 (22.2mm), 3/4 (19mm), 5/8 (15.9mm), 1/2 (12.7mm), 3/8 (9.5mm), 1/4 (6.3mm).
Function: When the air conditioner is installed, expand the copper pipe to make the two copper pipes interconnected. (It needs to be installed on a hand electric drill).
Operation method: according to the expanding pipe diameter, select the corresponding expanding head and install it. In order to prevent the edge of the pipe from cracking, the tip of the expanding head should be used to expand the pipe. Then insert the whole expanding head into the copper tube and apply force evenly until the cup mouth is formed..

Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....

Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

...d 7/8", pipe benders The head can be replaced to meet more needs..
HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools and easy to carry. We provide a 12-month warranty. Your order is delivered quickly by Amazon..

Check Stock

ENGA Bathroom Square Matte Black Solid Brass Hand Held Shower Head With Wall Connector and Hose System Wall Mount Handheld Showerheads Set

INCLUDES: Handheld shower head（Brass）, 1.5M shower hose（304 stainless steel），shower holder（Brass )..
BRASS HIGH PRESSURE HANDHELD SHOWER: 44 Powered Anti-Clogging Silicone Jets,Prevent lime and hard water deposits,strong shower stress Wash off easily Shampoo on thick hair..
HAND SHOWER HOLDER:Brass Material,Adjustable,The male thread standard ½” NPT PIPE connectors and the male thread G1/2" shower hose connectors..
SHOWER HOSE: The external tube, 100% made by stainless steel, and two solid BRASS/COPPER connectors ensure non-rusty and durable.The internal pipe, 100% made by premium material EPDM, which is non-toxic & odorless, heat-resistan and cold resistant, high water pressure resistance..
APPEARANC AND DURABILITY: With the Brushed Nickel coating appearance style and the multi-layered electroplating passing the Salt Spray Test, it can easily face the surface corrosion by humid environment in the shower room..

Check Stock

Exhaust Front Mid Link Pipe,Motorcycle Exhaust Mid Header Pipe Stainless Steel Replacement for AFRICA TWIN CRF1000L ADV 2016 ‑2019

◇[Excellent Performance] - This middle link pipe is connected to the silencer tube and will not rust even when exposed to high temperature or rain. The product also has good performance in reducing exhaust gas temperature and is not easy to form water..
◇[Perfect substitute] - Motorcycle middle tube design, easy to install. A good alternative to old or broken. You don't have to worry about installation problems at all. This steel intermediate tube is easy to install and can directly replace the original middle tube. Good performance in reducing the exhaust temperature..
◇[Compatibility] - This exhaust middle pipe is designed for Honda MSX125 2013-2015. These parameters are very important for the suitability of your car, please don't ignore it..
◇[Durable] - Made of high-strength stainless steel, -resistant and durable. Our motorcycle middle exhaust pipe use strict quality control standards, improved design, advanced production processes and more durable intermediate connections..
◇[High-profile decoration] - This exhaust connect pipe is stylishly designed to provide bold decoration for your motorcycle. This is the best choice for making your motorcycle better. 100% new aftermarket exhaust pipe mid section..

Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..

Check Stock

EZPHIX Pipe and Tube Cutter, Ratcheting Hose Cutter One-Hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4\ O.D. PEX, PVC, and PPR Pipe (orange42mm)

003cp003eThe durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting003c/p003e.
003cp003e【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue.003c/p003e.
003cp003e【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. T....

Check Stock

Enga Solid Brass High Pressure Hand Held Shower Wand Square Head with Adjustable Supply Elbow Wall Connector Shower Holder and Hose Set, Brushed Nickel

INCLUDES: Handheld shower head（Brass）, 1.5M shower hose（304 stainless steel），shower holder（Brass )..
BRASS HIGH PRESSURE HANDHELD SHOWER: 44 Powered Anti-Clogging Silicone Jets,Prevent lime and hard water deposits,strong shower stress Wash off easily Shampoo on thick hair..
HAND SHOWER HOLDER:Brass Material,Adjustable,The male thread standard ½” NPT PIPE connectors and the male thread G1/2" shower hose connectors..
SHOWER HOSE: The external tube, 100% made by stainless steel, and two solid BRASS/COPPER connectors ensure non-rusty and durable.The internal pipe, 100% made by premium material EPDM, which is non-toxic & odorless, heat-resistan and cold resistant, high water pressure resistance..
APPEARANC AND DURABILITY: With the Brushed Nickel coating appearance style and the multi-layered electroplating passing the Salt Spray Test, it can easily face the surface corrosion by humid environment in the shower room..

Check Stock

Libraton Pex Cutter 1-1/4\

【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..

Check Stock

50 PCS 1 inch Greenhouse Clamps Clips Black ABS Snap Clamp Tube Clip Garden Buildings Tube Clip for Greenhouse Film, Sunshade Nets, Frame Shelters

Specification: You will get 50 pieces black tube clips, each black snap clamp length is 3inch (8cm), the outer diameter is 1.26 inch (3.2cm). It is suitable for pipes diameter up to 1 inch, as well as pipes with slightly larger or smaller diameters, please confirm the pipe diameter before purchase..
Widely Use: These rugged ABS fixtures are suitable for fixing greenhouse film, sunshade nets, seam frames, etc. It can also be fixed line cover, shelter, bird protection, dog bed, shower curtain, wire, branches and other places..
Practical Application: These snap clamps are compatible with many types of 1 inch pipes, such as PVC pipe, metal pipe, plastic pipe, wood pipe, steel pipe, etc. as long as the pipe size is appropriate, it is basically suitable. It fastens the plastic to the pipe so that you can easily build a greenhouse with these plastic clips..
Reliable Material: These tube clips are made of high quality ABS material, it has the characteristics of high temperature resistance, wind resistance, nice strength, good toughness and not easy to fracture. Seiko production, smooth surface without burr, stable structure, with better grip..
Flexible Use: The tube clip is very light and flexible, can be moved at any time and easy to install, it is the ideal ch....

Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
Comes with five roller, which is suitable for cutting pipes of different sizes..

Check Stock