ReviewsNickel titanium Alloys

KEO 53513 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 3/8\ Shank Diameter, 5/8\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 53512 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 5/16\ Shank Diameter, 1/2\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

BHA Green Zirconia with Grind Aid Quick Change Sanding Discs Type R Male Roll On, 2' (36 Grit) - 25 Pack

  • 2 Inch Diameter Quick Change Sanding Discs made with premium Zirconia abrasive grains featuring Active Grinding Aid which prevents loading and reduces heat buildup.
  • Excellent for use carbon steel, cast iron, titanium, aluminum, brass, bronze, copper, or hard woods as well as heat sensitive materials such as stainless steel, nickel alloy or cobalt alloys..
  • Feature Male Type R - Quick Roll On / Roll Off fastening system and are meant to be used with a 2-inch backing pad that can then be attached to any ¼” power drill, air grinding tool, or die grinder..
  • Available in 36 grit, 40 grit, 60 grit, 80 grit, and 120 grit.
  • Comes with 25 Quick Change Sanding Discs Per Pack.
Check Stock

Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Use for radius and contouring part surfaces.
  • Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous.
Check Stock

Happy Smiley Crying Face Charm Bracelet Fashion Jewelry Titanium Steel Unisex (c)

  • Material:Titanium steel,Designs: Smiley Crying Face Bracelet.
  • A pure meaningful symbol of your belief of love and salvation. whatever happy or sad, good or bad, keep going,life going,you going Perfect birthday gift for a son or daughter, brother or sister, niece or nephew, boyfriend or girlfriend, best friend or for everyone..
  • High-quality materials: The smiley face bracelet uses metal, copper and alloys as the main materials. After rigorous contact tests, nickel-free, lead-free, and cadmium-free products are safe for humans and harmless to health. When you wear them, they will not fade easily and look very shiny..
  • Applicable occasions: smiling face fashion personality bracelet is definitely a perfect gift for ladies, men, girlfriends, teenagers, daughters, best friends or your special friends, your birthday gift, anniversary gift, Christmas gift, for them Of graduation gifts, Valentine's Day gifts, Anniversary gifts..
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

THINBIT 3 Pack LGT040D2RE 0.040\ Width 0.100\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

THINBIT 3 Pack LGT020D2RE 0.020\ Width 0.060\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Cuts up to .060" deep. Can be used for parting stock up to .120". Cuts flush to collet face or shoulder of larger diameter..
  • Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
  • TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree..
Check Stock

CynKen 1x200x200mm Titanium Plate Sheet TA2/GR2 Sheet

  • High strength - density titanium alloy generally about 4.5g / cm3..
  • High heat intensity - temperature of several hundred degrees higher than aluminum..
  • Good corrosion resistance - Titanium work in a humid atmosphere and seawater, the corrosion resistance is far superior to stainless steel.
  • for pitting, etching, stress resistance particularly strong.
  • and other organic materials have excellent corrosion resistance..
  • Good low temperature performance titanium alloys at low temperatures and extremely low temperatures, can still maintain its mechanical properties..
Check Stock