ReviewsNissan 350z Intake Manifold

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..

Check Stock

GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips , black

Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
The extruded U-nuts can be used to replace/fix to the bumper.
The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement.
Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details).
Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) 10pcs Plastic Push Clips as pictured.

Check Stock

Air Cleaner Intake Hose Tube with Clamps for 2007-2013 Nissan Altima 2.5L 4 Cylinder Engine 16576-JA000

... Please make sure to match the exact part numbers between this part and the part that you are replacing..
【Function】Air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects the air filter box and the intake manifold. The intake hose cracks, chips, or breaks can develop cracks and holes which can result in a check engine light (CEL), poor fuel economy, and hesitation during acceleration, under these circumstances, you need replace it timely!.
【High-quality】Made of rubber materials that contain the component of high-tenacity fibre, have more enhance antioxidant and anti-aging, fully resist cracking caused by drying and prevent soften from high temperature. While this is NOT a genuine OEM part, but it's good value, the price is only a small part of the dealer!.
【Warranty】A professional auto parts manufacturer, strictly based on oe quality parts for open mold manufacturing, to ensure accurate product adaptation. We provide 1 year warranty service, If you are encounter product installation, product quality and other problems, please feel free contact....

Check Stock

E-Tuner 4

EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..

Check Stock

Replacement Exterior Door Handle Kit - Replaces 80607-CD41E, 80606-CD01E - Compatible with Nissan 350Z 2003, 2004, 2005, 2006, 2007, 2008, 2009 - Driver and Passenger Side - Year Model 03 - 09

Replacement Exterior Door Handle Kit - Allows both the driver side and passenger side door of your 350Z to be opened from the outside. This is a common issue of the 350Z with the plastic pieces being broken inside the door handle due to wear and tear..
Compatible Replacement for Nissan 350Z - This replacement door handle for the front left driver and front right passenger side door fits 2003, 2004, 2005, 2006, 2007, 2008, 2009 350Z all with a 3.5L V6 Engine. If you are unable to open the doors from the outside then you may have to replace your door handles..
Replaces Part# 80607-CD41E, 80607-CD400, 80607-CD401, 80607-CD40A, 80607-CD40B, 80607-CD40C, 80607-CD40D, 80607-CD40E, 80607-CD41D, 80606-CD01E, 80606-CD00E, 80606-CD000, 80606-CD001, 80606-CD00A, 80606-CD00B, 80606-CD00C, 80606-CD00E, 80606-CD00D, 80606-CD01D usually found on popular 350Z models with years 03, 04, 05, 06, 07 , 08, 09..
OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is direct replacement part for your factory 350Z exterior door handles and will fit, work and look exactly like the factory part. This exterior door handle kit also has a keyhole for the driver's side of your 350Z..
Lifetime Warranty - This replacement part from AA Ignition comes comple....

Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....

Check Stock

4 Pack Speaker Wire Harness Adapter Replacement for Nissan Speaker Harness 2004-2021 Infiniti Speaker Harness 2006-2018 Car Speaker Connector Harness Adapter

【Compatibility】Car Door Speaker Wiring Harness Adapter Replacement for Nissan speaker adapter, Nissan Murano 2003-2019,Nissan Frontier 2011-2019,Nissan Juke 2011-2019,Nissan Maxima 2004-2019,Nissan Pathfinder 2005-2019,Nissan Quest 2004-2017, Nissan Rogue 2008-2019,Nissan Cube 2009-2015,Nissan Sentra 2004-2018,Nissan Titan 2004-2019, Nissan Versa 2005-2019,Nissan 350Z 2003-2009, Nissan NV1500/2500/3500 2012-2018, Nissan Armada 2004-2015.
【Compatibility】Speaker Wiring Harness Adapter Compatible with Nissan Xterra 2005-2015, Nissan Altima 2004-2019, Speaker Wiring Harness Adapter Compatible with Infiniti, Infiniti M35 2006-2010, Infiniti G35 2003-2015, Infiniti FX50 2009-2018, Infiniti EX35 2008-2012, Infiniti Q40 2007-2015, Infiniti FX37 2009-2018, Infiniti FX35 2003-2012, Infiniti FX45 2003-2008, Infiniti G37 2007-2015, Infiniti G25 2007-2015, Infiniti QX70 2009-2018.
【OEM Perfect Fit & Easy to install】4 Pack speaker harness adapter for Nissan, 2 Pin infiniti speaker wire harness, Manufactured with factory quality nissan speaker wiring harness, no soldering or splicing, made your speaker upgrades really simple..
【20 Year Warranty】Superior Nissan speaker harness is committed to better serving our clients through quality products,....

Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
Package Contents: 1 Engine Intake Manifold Flap Motor.

Check Stock

KFE KFE815-104 Ultra Quiet Advanced Premium Ceramic Brake Pad FRONT Set For: Nissan Altima, Sentra, Cube, Juke, Maxima, Versa, 350Z; Infiniti G20, G35, I30; Suzuki SX4

OEM Fitment and Warranty – Perfect fitment, no issues, and no hassle Limited Warranty.
Low Noise - Dual-Rubber Shims dramatically reduces vibration noise.
Less Break-In Time - Thermo Scorched manufacture process help reduce break-in time.
Increase Brake Bite, Long Life – Slots, and Chamfered edges features enhances brake bite, extends pad life and reduces noise. *Please check per your vehicle application.
not all applications have slotted/chamfered features.
Compatible With FRONT Brake Pad For: 02 Infiniti G20, 05 Infiniti G35 AWD, 03-04 Infiniti G35 Non-Brembo, 01 Infiniti I30, 02-04 Infiniti I35, 03-05 Nissan 350Z Non-Brembo Calipers, 13 Nissan Altima S Coupe, 02-12 Nissan Altima Exc SE-R 09-14 Nissan Cube, 11-17 Nissan Juke Exc Nismo RS, 01-03 Nissan Maxima, 07-19 Nissan Sentra Exc Spec-V, 09-12 Nissan Versa 1.8L Sedan, Hatch, 08 Nissan Versa Non-ABS, 07 Nissan Versa, 09-13 Suzuki SX4.

Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..

Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
Molded to Factory Dimensions for a Perfect fit.
Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.

Check Stock