ReviewsNn Sn686ss

Panasonic NN-TK73LSS 30-inch Trim Kit for 1.6 cu ft Microwave Ovens, Stainless Steel

Stainless Steel 30” Microwave Trim Kit compatible with 1.6 cu ft Panasonic Microwave Oven models including NN-SD7**S and NN-SN7**S.
Trim Kit Outer Size - 760mm or 30” (W) x 419mm or 16-1/2” (H) x 20mm or ¾” (D).
Required Cabinet Opening – 724mm or 28-1/2" + 8mm or 5/16” – 0mm (W) x 389mm or 15-5/16" +/- 2mm or 5/64” (H) x minimum 533mm or 21" (D) and minimum 920mm or 36-1/4” from the floor.
Tools Needed for Installation - Measuring tape, pencil, Phillips screwdriver, Ø 2 (5 /64") mm drill.

Check Stock

[Updated New] 7 Fins Blender Parts for Ninja Blender Cups Compatible with Nutri Ninja Auto-iQ BN800 BN801 BL642 BL642-30 BL685 BL685-30 BL687CO-30 Blender Replacement Parts Juicer Accessories

【Compatibility】-- The blender attachments compatible with Nutri Ninja 431KKU480, BL455-30, BL481-30, BL487, BL487A, BL487T, BL491, BL492, BL492IS-30, BL494, BL640-30, BL641-30, BL642-30, BL680A-30, BL681A, BL681C, BL682-30, BL682QT-30, BL685, BL685-30, BL687CO-30, BL2012, BL2013, BN800, BN801, NN100, NN100A, NN101, NN102, NN210, CT680SS, CT680CO2SS. ONLY fit 18,24,32-Oz cups, NOT fit 16-Oz blender cups..
【NOT Fit】-- The blender blade is not compatible with Ninja models listed below : BL451-70,BL454-70,BL482-70,BL660, BL663,BL740,BL770,BL771,BL773CO,BL780,BL820,BL830. ONLY fit 18,24,32-Ounce cups, NOT fit 16-Ounce blender cups..
【Extra 2 Gaskets】-- Please note one rubber washer is pre-installed already in the blade assembly to get tight seal to avoid leakage. Extra 2 Gaskets are for your future replacement use. Do not install the extra one when test or use. One blade are only sealed with one Rubber Gasket. Please make sure that the blender cups and blade are properly assembled every time before operating the appliance..
【Package Included】-- 1 x Blade Replacement with Rubber Gasket O Ring pre-installed already in the blade. 2 x Rubber Gaskets, 1x Brush. Total 4 pieces for your Ninja blades replacement. Blade Size: Diam 3.....

Check Stock

Turntable Motor for Panasonic F63265G60AP F63265G60CP Microwave Synchronous Motor NNSD987S NN-SD987S etc

❤Fits Part # F63265G60AP F63265G60CP E199325 E199578 NN-SD797S NNSD372S NN-SN977S NNSD745S NNSD945S NNSD987S NNSN736B NNSN736W NNSN744S NNSN766S....
❤Fits With Various Panasonic Brand Models.
❤30-Day Money-Back Guarantee And 180 Days Warranty.
❤Notice: This Is Third Part Item, Same Function As Original Part, Can Be Used Directly For The Model, Quality Ensurance.

Check Stock

SAMSUNG 1.2 Cu Ft PowerGrill Duo Countertop Microwave Oven w/ Power Convection, Ceramic Enamel Interior, Built-In Capability, 900 Watt, MC12J8035CT/AA, Fingerprint Resistant Stainless Steel, Black

Cyclonic wave microwave at every temperature level, cyclonic wave circulates heat in precise ultra efficient 3d waves for easier more versatile food preparation, even with more complex food textures.
Microwave controls: 20 preset sensor cook menu items, inverter turbo defrost, delay start and timer, more/less control, child safety lock, quick 30 sec and popcorn button with 3 cooking levels.
Minimum countertop footprint smart, compact design devotes less space to electronics and far more interior capacity.
up to eight pounds lighter than conventional microwave ovens.
Sensor invertor turbo defrost: Utilizes a microwave sequencing system based on inverter's continuous power delivery method to thaw foods more evenly and quickly. UL Certified.
TRIM KIT OUTER SIZE – 684mm or 27” (W) 472mm or 18 9/16” (H) 20mm or ¾” (D).
TRIM KIT INNER SIZE – 24 5/8" (W) x 13 7/16" (H).
CABINET OPENING – 648mm or 25-1/2" + 8mm or 5/16” – 0mm (W) 442mm or 17-3/8" +/- 2mm or 5/64” (H) minimum 533mm or 21" (D) and minimum 920mm or 36 ¼” from the floor.
COMPATIBLE MICROWAVE OVENS - This Trim Kit is designed for use only with the NN-SE9**S | NN-SD9**S | NN-SN9**S | NN-ST9**S Panasonic Microwave Ovens.

Check Stock

[Updated Version] 7 Fins Blender Blade Compatible with Ninja Blender Blade Replacement for Ninja Auto iQ BL682-30 BL642-30 BL450-30 BL482-30 BL687CO-30 ect. BL450-30 BL642-30 BL482-30 BL682-30 ect.

【Updated Blade Style】 As you can see from the picture, our latest ninja blender blade comes with new blade on the top. This blade is proven to have better balance and greater applicability.BPA free and Dishwasher safe..
【Compatibility】Our 7 fins blade is suitable for Nutri Ninja Auto iQ NN100, NN100A,NN101,NN102,BL2012,BL2013,BL450-30,BL455-30,BL481-30,BL482-30,BL485,BL486CO,BL487,BL487A,BL487T,BL491,BL492,BL492IS-30,BL494,BL640-30,BL641-30,BL642-30,BL680A-30,BL681A,BL681C,BL682-30,BL682QT-30,BL685-30,BL687CO-30,CT680SS,CT680CO2SS,CT641-30 (Please confirm your blender need 7 fins replacement blade before purchasing)..
【No Suitable for】 Please don’t order our 7 fins blade for these model: BL660, BL663, BL740, BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70..
【Extra Gasket】 There is already one gasket in blade when you receive it, the extra gasket is for replace in future,do not install the extra one when test..

Check Stock

Microwave Oven Synchronous Motor Replace for Frigidaire 5304464113 and Panasonic F63265G60AP F63265G60CP

Compatible with various brand models including Sanyo,Thermador, Sears and Maytag Microwave Motors and GE Profile microwave JES2251SJ02 with shaft "D"....
Compatible with Panasonic F63265G60CP models NNSD745S NNSD945S NNSD987S NNSN736B NNSN736W NNSN744S F63265G60AP and NN-SD797S NNSD372S NN-SN977S..
Compatible With Frigidaire Microwave 5304464113 Model CFMV152CLBA CFMV152CLWA CFMV152KBA CFMV152KQA CFMV152KSA CFMV152KMA..
Same function as original part, can be used directly for the brands and model above, recently produced motor, 100% new item, not the same as other....
Well protected by box, quality insurance by the same OEM factory, test before shipping, 100% quality warranty for 12 months..

Check Stock

Panasonic 27 TRIM KIT, 27 inch, Silver & Microwave Oven NN-SN966S Stainless Steel Countertop/Built-In with Inverter Technology and Genius Sensor, 2.2 Cubic Foot, 1250W

TRIM KIT OUTER SIZE – 684mm or 27” (W) 472mm or 18 9/16” (H) 20mm or ¾” (D).
TRIM KIT INNER SIZE – 24 5/8" (W) x 13 7/16" (H).
CABINET OPENING – 648mm or 25-1/2" + 8mm or 5/16” – 0mm (W) 442mm or 17-3/8" +/- 2mm or 5/64” (H) minimum 533mm or 21" (D) and minimum 920mm or 36 ¼” from the floor.
COMPATIBLE MICROWAVE OVENS - This Trim Kit is designed for use only with the NN-SE9**S | NN-SD9**S | NN-SN9**S | NN-ST9**S Panasonic Microwave Ovens.
Panasonic Microwave: This 1250 Watt high power, 2.2 cubic foot capacity stainless steel countertop/built in microwave delivers a seamless stream of cooking power for even cooking and delicious flavor.
Inverter Technology with Turbo Defrost: Patented Inverter Technology generates a seamless stream of power and delivers consistent, evenly prepared food without overcooking.
Advanced Inverter Turbo Defrost speeds up defrosting time.
Large Family Size: This countertop microwave with 16.5 inch turntable is thinner, lighter and more efficient, allowing you to devote less space to electronics and more to interior capacity.
Internal dimensions (H x W x D): 10.94 inch x 18.44 inch x 18.50 inch. Outside dimension HxWxD (Inches) 14 x 23.9 x 19.4.
Smart Cooking Settings with Genius Sensor: Built in automatic geniu....

Check Stock

KoolMore KM-MD-1SS 24 Inch Stainless Steel Microwave Drawer with 1.2 cu. ft. Oven, 1000W Power with 10 Custom Cooking Levels, Memory, and Timer Functions, Wall-Mounted with Flat Bottom

Inverter Technology with Turbo Defrost: Patented Inverter Technology generates a seamless stream of power and delivers consistent, evenly prepared food without overcooking.
Advanced Inverter Turbo Defrost speeds up defrosting time.
Compact Design: This countertop microwave with 15 inch turntable is thinner, lighter and more efficient, allowing you to devote less space to electronics and more to interior capacity.
Dimensions: Interior HxWxD :9 x 16.4375 x 18.5 inches, Dimensions-12 D x 19.1 W x 21.8 H inches.
Smart cooking settings with Genius sensor: Built-in automatic genius sensor adjusts power and times based on different foods.
Other advantages include 14 Preset menu items, quick-minute timer, delay start and child safety lock.
TRIM KIT OUTER SIZE – 684mm or 27” (W) 419mm or 16 1/2” (H) 20mm or ¾” (D).
TRIM KIT INNER SIZE – 22 5/8" (W) x 11 3/8" (H).
CABINET OPENING – 648mm or 25 ½” +8mm or 5/16” – 0mm(W) 389mm or 15 5/16” +/- 2mm or 5/64” (H) minimum 533mm or 21" (D) and minimum 920mm or 36 ¼” from the floor.
COMPATIBLE MICROWAVE OVENS - This Trim Kit is designed for use only with the NN-SE7**S | NN-SD7**S | NN-SN7**S | NN-ST7**S Panasonic Microwave Ovens.

Check Stock

Pack of 4 White Gaskets Rubber Sealing O-Ring Replacement Part for Nutri Ninja Blenders 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70

【Protect Blender】Better protection of the blender and play a role in sealing. It can be used for a long time. The diameter of the sealing o-ring is 10cm/3.94inch, please check if it is suitable for your Ninja Blender before you buy it..
【Wide Compatible】Compatible with blades for Nutri Ninja blender models: BL2012, BL2013, BL480, BL480D, BL481, BL482, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680, BL680A, BL682, CT640C, CT641, CT680, CT680A, CT680SS, CT680W, CT682SP, NN100, NN100A, NN101, NN102, NN210..
【Premium Material】 It’s made of rubber material, superior toughness, not easy to deformation. Easy to Install..
【Easy To Clean】Flexible O-ring, convenient to clean. Washing it in the water and dry it up..
【Package】Package includes 4 (four) white gaskets for Nutri Ninja Auto-iQ blenders..

Check Stock

URSUMER Ninja Blender Replacement Parts - 32OZ Ninja Blender Cups and 7 Fins Blade, Nutri Ninja Blender Parts Ninja Bullet Blender Cups for Auto iQ BL682-30 BL642-30 BL450-30 BL482-30 BL687CO-30 ect.

【Packing Listing】 1 X 32oz ninja blender cups replacement, 1 X 7 Fins ninja blades replacement, 1 X Sip Seal Lid..
【Compatibility】Our ninja blender accessories blade is 7 fins, 4inch"/10cm Diameter. It is suitable for Nutri Ninja Auto iQ NN100, NN101, NN102, BL2012, BL2013, BL450-30, BL455-30, BL455-30, BL481-30, BL482-30, BL485, BL486CO, BL487, BL487A, BL487T, BL491, BL492, BL492IS-30, BL494, BL640-30, BL641-30, BL642-30, BL680A-30, BL681A, BL681C, BL682-30, BL682QT-30, BL685-30, BL687CO-30, CT680SS, CT680CO2SS, CT641-30. Only fit for 18/24/32OZ nutri ninja blender cups..
【No Suitable for】Please don't order our 7 Fins Ninja Blender Blade for these model: BL660, BL663, BL740, BL770, BL771, BL773CO, BL780, BL780, BL820, BL830, BL450, BL451-70, BL454-70, BL482-70..
【Premium Quality】Made of High Quality 100% BPA-free High Impact Plastic and Food-grade High-strength Stainless Steel, Dishwasher Safe. Precision Durable and Work Great. Easy Installation and Cleaning, Perfectly Match of Original Parts. Replace your old or damaged ninja blender replacement parts to give your ninja blender a new look..

Check Stock

AxPower Replacement Parts for Ninja Blender with 2 24oz Cups and a 7 Fins Extractor Blade and a Cup Lid for Nutri Ninja Auto iQ BL642 BL682 NN102 BL2013 and more (4 Pack)

【COMPATIBLE MODEL】AxPower 7 fins extractor blade is compatible with Nutri Ninja Auto-iQ: NN100,NN100A,NN101,NN101-30,NN102,NN210,BL450-30,BL454Q,BL480-30,BL481-30,BL482-30,BL483-30,BL485,BL486CO,BL487,BL487A,BL487T,BL488W,BL490,BL491,BL492,BL492W,BL493,BL494,BL494C,BL641,BL680A,BL680A-30,BL682,BL682-30,BL682W,BL487CO,BL2012,BL2013,CT640,CT641,CT680,CT680A,CT680W,CT680SS,etc.(Only fits 18oz, 24oz, 32oz cups). Please make sure your blender need 7 fins replacement blade before order..
【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. The replacements are made of durable food-grade material, BPA free and dishwasher safe, not easy to break and scrape..
【IMPORTANT NOTE】 1. The rubber gasket in the bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. 2. Please check your blender model & size before your purchase..
【PACKAGE INCLUDED】 1x 7 Fins Replacement Bottom Blade, 1 x Cup Lid, 2 x 24oz Cup and 1 x Cleaning Brush as a gift..
【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top pr....

Check Stock