ReviewsNodemcu Development Board

ACEIRMC ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Internet for Arduino IDE Micropython (6pcs)

  • ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • Full I/O port and Wireless 802.11 supported, direct download no need to reset.
  • compatible for Arduino compatible, works great with the latest for Arduino.
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime..
  • Package included: 6 x ESP8266 NodeMCU WiFi Development Board.
Check Stock

DORHEA 3Pcs ESP32 Development Board WiFi + Bluetooth Microcontroller Dual Cores ESP-32 ESP-32S Board ESP-WROOM-32 CP2102 Chip 38Pin Narrow Version 2 in 1 Dual Core Low Power Consumption ESP-32S

  • The esp32s module has 38 pins and has more features than a 30-pin module, narrower width, compatible with breadboard.
  • ESP32 is a WiFi+Bluetooth chip developed. It is designed to provide access network functionality for embedded products..
  • ESP32s development board support Lua program, easy to develop, support of three modes: AP, STA and AP + STA..
  • NodeMCU-32S is based on the ESP-32S module. The platform uses many open source projects , this module is safe, reliable, and scalable to a variety of applications..
  • NodeMCU-32S includes firmware that can run on ESP32 Wi-Fi SoC chip, and hardware based on ESP-32S module..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

Arduino | Step by Step: The Ultimate Beginner’s Guide with Basics on Hardware, Software, Programming & DIY Projects (Arduino | Introduction and Projects Book 1)

  • Advancing the development of robotics technology w/ Earth's 2nd biggest & most advanced starter kit for Arduino. 65+ pieces w/ FIVE main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3, ESP32 WiFi+Bluetooth and ESP8266 NodeMCU development platforms.
  • Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users.
  • Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield.
  • All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly.
  • Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable orga....
Check Stock

HiLetgo 3pcs NodeMCU GPIO Board ESP8266 NodeMCU Pin Out IO Out 1 into 2 for ESP8266 ESP-12E NodeMCU Development Board

  • NodeMCU can be connected through by Pin Header & Screw Terminal.
Check Stock

ACEIRMC D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino (3pcs)

  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications..
  • MH-ET LIVE D1 mini ESP32 ESP-32 WiFi+Bluetooth Interne.
  • 100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios..
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO..
  • D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible with Arduino.
Check Stock

Module A9G Board, A9G Development Board GSM/GPRS + GPS/BDS Module Wireless Data Transmission + Positioning Board

  • ★[A9G Development Board] – The A9G development board is a versatile development board based on A9G GPRS / GSM + GPS / BDS module that can be used to validate the basic communication functions and peripheral functions of the A9G module..
  • ★[Multifunction] – A9G development board with the basic phone / SMS, GPRS networking communications, GPS / BDS dual-mode positioning capabilities..
  • ★[Specification] – A9G development board contains a lithium battery charging management, microphone, speaker interface, USB communication interface, multiple user keys / led, TF card slot, accelerometer, I2C2 interface, ADC interface..
  • ★[External Interface] – A9G development board camera expansion board, an external 30W / 200W camera.A9G development board coin machine expansion board, can be external traditional coin machine..
  • ★[After-Sale Service] — Good day. every effort to provide customers with satisfactory service.If you have ANY questions, please email us and BELIEVE us, we will reply you soon..
Check Stock

7Pcs ATTINY88 Microcontroller Development Board 16Mhz I2C and SPI 26-PWM Digispark ATTINY85 Nano V3.0 Extended Module

  • ATTINY88 micro development board based microcontroller development board similar to the board line, only cheaper, smaller, and a bit less powerful..
  • With the ability to use the familiar IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much..
  • ATTINY88 micro development board has 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • ATTINY88 micro development board support for the IDE 1.0+ (OSX/Win/Linux).
  • The MH-ET LIVE Tiny88(16.0Mhz) is fully assembled except for the headersincluded and easy to solder them by yourself..
Check Stock

LGDehome Gold Plated Solderable Breadboard for DIY Electronics Projects Compatible with Arduino Soldering Projects Pack of 12 Black+Blue+Red+Green+Gold

  • Anti-Oxidation:High quality Gold plated finish to prevent oxidation,Accurate hole spacing,Board takes solder easily,and all holes are through-plated....
  • Wide application:Fit for a variety of MCU boards.Compatible with Arduino Nano, Pro Mini,ESP8266, NodeMCU,MCU boards etc.
  • Convenient to use:Perfect for moving projects from bread board to final project.Easy to connect to the components without using the header connectors.....
  • LeadFree and RoHS compliant for longer shelf life.
  • Package inlcuded:6 pack 2.05"x3.5" Gold-plated Solder-able Breadboard (2xBlak+2xBlue+2xRed)+5PCS Green double sided Breadboard+2 pcs Copper Strip....
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in....
  • Breadboard PCB for any type Raspberry Pi GPIO.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
Check Stock