ReviewsNoise Damping Sheets

Siless 50 mil (1.3mm) 26 sqft Car Sound Deadening mat – Butyl Automotive Sound Deadener – Noise Insulation and Vibration Dampening Material ( 26 sqft)

★ Siless VIBRO 50 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well..
★ Advanced Formulation – SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today..
★ Value – SILESS VIBRO Damping Material is just priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!.
★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product..
★ SILESS VIBRO specifications — Thickness 50 mil, Coverage area 26 sqft, Number of sheets in the box 10, Each sheet size 23.6×15.94 inch. Installation instruction is included in the box. Please note: Siless Branded logo on the front is optional, some batches could have it and some not..

Check Stock

Thermalright TL-B8W CPU Fan Computer Case Fan Quiet 4pin PWM PC Fan, 80mm Silent Cooler Fan, 2200RPM Speed, CPU Cooling Fan(White)

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*25mm, Speed: 2200RPM±10%, Noise ≤24dBA Connector: 4pin pwm, wind pressure: 2.7mm H2O,Air Flow: 34CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers. Easy to install, can be combined with instructions or installation tutorials..

Check Stock

Siless Max 120 mil (3mm) 36 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (36 sqft)

★ Siless MAX VIBRO 120 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well..
★ Advanced Formulation - SILESS MAX VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today..
★ Value - SILESS VIBRO Damping Material is just under $1.95 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!.
★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product..
★ SILESS VIBRO specifications — Thickness 120 mil/ 0.12 inches/ 3mm, Coverage area - 36 ft², Number of sheets in the box - 29, each sheet size - 15.35x11.81 inches. The installation instructions are included in the package but a roller isn't..

Check Stock

Siless 80 mil (2mm) 36 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (36 sqft)

★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well..
★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today..
★ Value - SILESS VIBRO Damping Material is just under $1.59 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!.
★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product..
★ SILESS VIBRO specs — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area – 36 ft², Number of Boxes – 1, Number of sheets in box - 14, Each sheet size - 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn't. PLEASE NOTE: Siless Branded logo on the front is optional, some batches could hav....

Check Stock

Siless 50 mil (1.3mm) 52 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material ( 52 sqft)

★ Siless VIBRO 50 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well..
★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today..
★ Value - SILESS VIBRO Damping Material is just under $1.14 per ft², priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!.
★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product..
★ SILESS VIBRO specs — Thickness 50 mil/ 0.05 inches/ 1.27 mm, Coverage area 52 ft², Number of Boxes - 1, Number of sheets in box - 20, Each sheet size 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn't. PLEASE NOTE: Siless Branded logo on the front is optional, some batches could have it....

Check Stock

Siless Black 80 mil (2mm) 36 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (36 sqft)

★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well..
★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today..
★ Value - SILESS VIBRO Damping Material is just under $1.64 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!.
★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product..
★ SILESS VIBRO specs — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area – 36 ft², Number of Boxes – 1, Number of sheets in box - 14, Each sheet size - 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn't. PLEASE NOTE: Siless Branded logo on the front is optional, some batches could hav....

Check Stock

Siless Black 50 mil 52 sqft Sound Deadening mat - Sound Deadener Mat - Car Sound Dampening Material - Sound dampener - Sound deadening Material Sound Insulation - Car Sound deadening

★ Siless VIBRO 50 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well..
★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today..
★ Value - SILESS VIBRO Damping Material is just under $1.16 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!.
★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product..
★ SILESS VIBRO specifications — Thickness 50 mil, Coverage area 52 sqft, Number of sheets in the box 20, Each sheet size 23.6x15.94 inch. Installation instruction is included in the box. Please note: Siless Branded logo on the front is optional, some batches could have it and some not..

Check Stock

Mason Hanger Mount Vibration Isolator, Spring Isolator Type, 130 to 175 lb. Capacity Range - 5C143

... resilient, anti-vibration, the metal stud is two pieces terminated and bonded within the rubber..
【Anti Vibration Design】--These heavy duty mounts provide excellent noise and vibration reduction, Composite material with natural rubber by innovative synthesis make the rubber mounts more efficient and durable..
【Damping Capacity】--As a damping element for welding machine and other equipment for vibration, shock and noise control. These heavy duty rubber isolator mounts provide excellent noise and vibration reduction due to the softness of the rubber..
【Adapt to many kinds of motors】--Rubber isolator mounts are suitable for air compressors, diesel engines, gasoline engines, water pumps, Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications..
【More after-sales service】--We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the anti vibration bobbin mounts, please contact us by e-mail, we will try our best within 24 hours to reply..

Check Stock

4 X M6 Anti Vibration Rubber Bobbin Mounts 20x10Mm Male Boat Car Damper

Mainly used for air compressors, diesel engines, gasoline engines, water pumps..
Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious..
As a damping element for welding machine and other equipment..
In the radio equipment, instruments, instrument, protect machine vibration interference , have a good buffer..

Check Stock

Cuziss Glass Fiber Flight Controller Anti-Vibration Damping Plate Shock Absorber Set for QAV250 CC3D Naze32 Mini APM Mini Flight Control

Mainly Used: This anti-vibration rubber isolator mount is mainly used for air compressors, diesel engines, gasoline engines, water pumps..
Damping Elements: This anti-vibration rubber isolator mount always used as damping elements for vibration and noise control..
Main Function: This anti-vibration rubber isolator mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously..
Simple Geometrical Design: This anti-vibration rubber isolator mount adopts simple geometrical design that supports dynamic performance and stability under lateral/sideways forces..
Anti-Vibration Silent Block: In audio equipment and instruments, This anti-vibration rubber isolator mount avoids machine vibration interference, having a good buffer..

Check Stock

Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

...ry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: 003c0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V..
Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): 003e400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: 003e 100dB, IMD 60Hz & 1kHz, 4: 1: 003c0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch..
Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max..

Check Stock