ReviewsNon Ferrous Copper

Imachinist S621214SS Bi-Metal 62\ Long, 1/2\ Wide, 0.025\ Thick Bandsaw Blades for Cutting Stainless Steel Hard Metal (14TPI)

  • Bi-metal type, M42 grade, 62" long, 1/2" wide, 0.025" thick, 14TPI for stainless steel.
  • Suitable for cutting stainless steel and other steel (hardness less than 30HRC), don't recommend to cut non-ferrous metal.
  • 14 TPI is constant teeth profile, teeth size: 6/10TPI003e8/12TPI003e14TPI003e14/18TPI003e24TPI.
  • Please do NOT cut any ferrous metals like aluminum, copper, brass with this blade.
  • Suits all bandsaws which use 62" long, 1/2" wide band saw blade.
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

12 sticks BLUEFIRE 1/2 lb Low Temperature Aluminum Zinc Alloy Brazing Rods All-Purpose Easy Melt Welding Rod for Soldering Aluminum Copper Stainless Steel Iron Metals Simple DIY Solution

  • Superior Performance - Works at much lower temperatures (728 °F/387°C) than most comparable brazing alloy products, allowing you to repair and fabricate more aluminum and other non-ferrous parts..
  • Perfect Welding Results: strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent machinability..
  • Scope of Application:Works with aluminum, aluminum alloy, steel and iron, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals. Allowing you to apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane torch like the best metalwork enthusiasts do..
  • WARRANTY -- If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

Makita Cup Saw 22Mm Bimetal D-17011

  • Suitable for steel aluminium non-ferrous metals copper brass wood plastic and PVC.
Check Stock

Tance Multifunction Mini Bench Saw Mini Table Saw for Cutting Wood Copper 4 Inch US Plug

  • 2. Using high-efficiency cut to low-noise motor drive,.
  • Features: 1. Lightweight and easy to carry,.
  • 3. With two kinds of material saw blade,.
  • 4. Can be plastic, wood, glass, stone and other non-metallic materials and copper, aluminum and other non-ferrous metal materials for cutting.
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker

  • Zircon’s MS 740 is a multi-surface scanner with 4 modes that allow you to detect and mark the location of studs, metal and live AC wiring.
  • ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results.
  • Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists.
  • Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster.
  • AC Scan finds and traces live, unshielded electrical AC wires.
  • WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes.
  • Integrated erasable wall marker enables users to mark targets with the simple push of a button.
Check Stock

SHARS HSS Center Drill Combined Drill and Countersink (#3-1/4\ 4\OAL 404-1367) P}

  • Made of premium M2 High Speed Steel and ground.
  • HSS material provides good wear resistance in mild steels and non-ferrous materials such as plastics, aluminum, copper, brass, bronze, rubber and wood.
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

6 Pack Simichrome Polish 1.76 oz Happich Metal Polishing Paste 390050 Bakelite Test

  • Simichrome Polish produces a rich, brilliant shine on any uncoated, non-ferrous, metal surface such as chrome, silver, brass, gold, copper, pewter, aluminum, magnesium, stainless steel, and more..
  • NOT FOR SALE IN CALIFORNIA - ALL CALIFORNIA ORDERS WILL BE CANCELED.
Check Stock

Cut Off Wheels and 1 Mandrel Kit, 20Pcs 3” x 1/16” x 3/8” Thin Cutting Discs with 1 Mandrel for Die Grinder

  • 【Material】The cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting.
  • The mandrel is made of A3 carbon steel with black plating, durable..
  • 【Function】The ultra-thin cutting wheel can achieve precise and fast cutting, while reducing burrs and material waste, minimal burrs and material waste. 3/8" & 1/4'' Mandrel are designed to fit mini cut-off wheels..
  • Perfect for General Purpose metalworking: Stainless Steel, Sheet Metal, Ferrous & Non-ferrous Metal, Cast Iron, Angle Iron, Rebar, Aluminium and Copper Cutting..
  • 【Fit for Tools】The Cut-off wheel mandrel with 1/4” Shaft, for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount. It's a great essential die grinder accessory..
  • 【Package】20pcs 3-inch Cut-Off Wheels + 1pc Adaptor kit.
Check Stock