ReviewsNon contact Current Measurement

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....

Check Stock

Klein Tools CL380 Electrical Tester, Digital Clamp Meter and Non-Contact Voltage Tester, Auto-Ranging and TRMS, 400 Amps, LCD Display

Electrical Tester measures both AC/DC current via the clamp.
Non-contact voltage tester integrated into the clamp jaw.
High-visibility reverse contrast LCD display for improved viewability in all ambient lighting conditions.
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
Measures AC/DC voltage, DC micro-Amp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads.

Check Stock

AIOMEST Digital Clamp Meter 6000 Counts, TRMS Multimeter with Auto Ranging, Amp Meter Measures Inrush AC&DC Current, AC&DC Voltage, Resistance, Capacitance, Diodes and Temperature

✨【6000 COUNTS CLAMP METER】: AN-6205 clamp meter is professionally designed for electricity circuit properties measurement. Test a wide range of measurements including AC/DC Voltage 0.01mV~600V, AC/DC Current 0.01A~600A, Resistance 0.1Ω~60MΩ, Continuity and Diode Test..
✨【AUTO POWER OFF SAFELY】: When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. The auto power off mode can provide the voltmeter with a longer service life while also better protecting the battery..
✨【STRONG OPERABILITY】: Built with 1.34 inches large double open jaw and pick up AC/DC Current flowing through the conductor, increasing safety while improving this meter’s capabilities. Over-load protection circuit can effectively help you to carry out measurement work within the measurement range. Auto ranging and auto LCD backlight make your measurement more convenience..
✨【CONVENIENT FEATURES】: The avometer included relative value, MAX/ MIN, data hold, inrush current test and audible continuity test, ideal for electrical troubleshooting problems, circuit properties measurement, automotive repair and maintenance, lab, industrial and household applications..

Check Stock

Kyoritsu 2300R True RMS AC/DC Fork Current Tester, 100Amp, 10mm Conductor

True RMS reading is an essential feature for accurate measurement.
Non contact voltage function indicates the presence of AC voltage by warning the user with an audible signal.
Set the DC current range to zero in one touch with the zero adjust function.
Designed to international safety standard IEC61010-1 CAT.3 300V.

Check Stock

Normally Open Current Switch Adjustable Isolation The AC Current Monitoring Current Detection Protection AC 0.2-30A SZC23-NO-AL-CH

Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..

Check Stock

Amprobe TACH-10 Tachometer with Contact and Non-Contact Measurement

Combination contact and non-contact measurements for measuring rotational speed of motors, conveyor belts, and other moving and rotational systems.
Contact measurements in RPM, m/min, ft./min, or yd./min and non-contact measurement in RPM for flexibility of use.
LCD display measures 15 x 33mm (0.6 x 1.3 inches) for readability.
Non-contact measurements using infrared beam function at a distance of 5 to 30cm (2 to 13 inches).
User selectable units for contact measurement: RPM, m/min,-Feet/min, yd/min.

Check Stock

Digital Clamp Meter Multimeter AP-7200A True RMS Clamp Multimeter 1999 Counts for Measure DC AC Voltage Current Resistance Diode Test with NCV Continuity Buzzer Data Hold Backlight

【True RMS Clamp Multimeter】The AC voltage and current measurement of AP-7200A clamp meter is true RMS measurement, which is more accurate for....
【Non Contact Voltage Detection (NCV)】With the NCV function of AP-7200A multimeter, you can easily detect and know if there is electricity in the....
【Multi-function Auto Range Clamp Meter】This portable clamp meter supports auto ranging, flashlight, function selection dial, data hold, Max/Min....
【Wide Applications】The clamp tester is compact, easy to operate, convenient to carry and low power consumption. It is ideal to be used in car....
【100% Satisfied After-Sales】AOPUTTRIVER provides 2 years product warranty and lifetime tech supports. Please don’t be hesitate to contact us if....

Check Stock

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

... 【Easy to Contact】The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security..

Check Stock

AEMC MN291 Compact AC Current Probe with 5' Lead, 0.5A to 240A Range, 100mVDC/A Output

True RMS reading is an essential feature for accurate measurement.
Non contact voltage function indicates the presence of AC voltage by warning the user with an audible signal.
Set the DC current range to zero in one touch with the zero adjust function.
Designed to international safety standard IEC61010-1 CAT.3 300V.

Check Stock

UEi DL479 Digital Clamp Meter T-RMS Auto Ranging 6000 Counts, HVAC Current Voltage Tester, Measures AC Amps AC/DC Volts Temperature Capacitance Frequency Diodes Duty Cycle Continuity Resistance NCV

【Innovative Super Large Full Display】This Clamp has a large full display and auto function, which makes it easy to read and operate. The Amp meter is as big as your phone and can be easily put in your pocket.
【Smart True-RMS clamp meter】 This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
【Multi-function and Large Range】 Backlit LCD Display, LED Flashlight, Temperature Measurement included K-Type Thermocouple, Low Battery Indication, Auto power off after 15 minutes inactivity. Large measure range can measure DC/AC current up to 600A.
【NCV Defection Function】 Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
【Highly Automation】Automatic recognition of AC and DC voltage, resistance, diode, capacitor.
Avoid hazardous situations by using the convenient clamp to safely measure AC or DC current without having to strip a cord or break a circuit.

Check Stock

USB C Power Meter Tester, Eversame USB Voltmeter Ammeter Load Tester with Braided USB C to USB C Cable(1.5Ft/50cm) - Test Speed of Charger Cables - PD 2.0/3.0 QC 2.0/3.0/4.0

【MULTIFUNCTIONAL TOOL】: Support quick charger recognition.
QC2.0/QC3.0, Voltage/Current/Power Detection.
cable impedance measurement. Automatically recognize QC multiple protocols such as PD QC2.0 QC3.0/4.0 MTK. Allows you to check the charging performance of the output wall/car/solar panel chargers and USB charging cables. It can be also used to find the highest current of the Wireless Charger, and test capacity and electric energy of power bank..
【WIDE RANGE APPILCATION】: Widely used in the quality inspection of digital devices with Micro USB and Type C peripheral. Great for testing and getting real draw ratings on various chargers and equipment, such as PC/Laptop/Desktop Computer/Mobile Phone/Power Bank/Charger/Discharge Load/Car Charger/Cable. With this tester, you can see clearly what was happening when charging various USB devices, ranging from iPhones, to Tablets and batteries..
【BRIGHT COLOR DISPLAY INTERFACE】: 1. Measurement Main Interface 2. Quick Charge Identification Interface 3. Data Recording Interface 4. Wire Group Impedance Measurement Interface 5. Voltage Graphing Interface 6.Current Graphing Interface 7. Settings Interface. Voltage measuring range 4.5-24V.

Check Stock