ReviewsNon ferrous Electrode

Rockwell RW8966 Sonicrafter Oscillating Multitool Extended Life Bimetal Wood & Nail End Cut Blade, 1-3/16'

  • Use to make plunge cuts up to 1-5/8-inch deep.
  • Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
Check Stock

Makita B-65399 Impact Gold 14 Pc Titanium Drill Bit Set 1/4 In Hex Shank

  • Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
  • 135 degree split point geometry for faster starts and reduced walking.
  • Impact rated: For use in 1/4 inches Hex impact drivers.
  • For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check Stock

Rockwell RW8966.3 Sonicrafter Oscillating Multitool Extended Life Wood & Nail End Cut Blade (3-Pack), 1-3/16'

  • Use to make plunge cuts up to 1-5/8-inch deep.
  • Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
Check Stock

Belifu TENS Unit Electrode Pads Reusable Self-Adhesive Replacement Massage Pads Latex Free, Standard Connection Snap on 3.5mm Cable for Tens EMS Massager

  • Premium Reusable Pre-Gelled Conductive Electrodes: 10 Pairs of electrode pads, total of 20 pieces, flexible, comfortable, and easy to peel off..
  • Self-adhesive electrode Pads: Pre-Gelled gel electrodes with extra thick and conductivity gel requiring no extra spectra 360 electrode gel or conductive adhesive Gel..
  • Durable and Flexible: The Premium Soft-Touch white non-woven cloth of these electrode stimulation pads is very durable and provides perfect flexibility and comfort enabling curving to body contours and around Joints for high conductivity electric shock therapy without skin irritation or chafing..
  • Easy to Apply: can be applied to any contour of the human body – conforms to your body to provide maximum pain relief..
Check Stock

TENS Unit Replacement Pads, 40 Pcs 2' x 3.5' TENS Unit Pads, Large Rectangular Electrodes Pads for Electrotherapy EMS Massager

  • WHAT YOU GET: 40PCS 2x3.5" tens pads are packed in a pre-sealed plastic bag for durability and convenient storage.
  • UNIVERSAL COMPATIBILITY: Standard 2mm pin connector of electrode pads fits most TENS units.
  • EMS massagers and IF devices, such as YK15AB, TENS 7000, AUVON, iReliev, Balego TENS 2nd Edition, iStim EV-820, Easy@Home EHE009, Trumedic PL-009, Santamedical, PurePulse, Famidoc, Belmint, MessuPro, Med-Fit, Intelect 07-7717 TENS Units and more.
  • SAFE AND COMFORTABLE: Our tens electrode pads are flexible and super comfortable to touch, white non-woven backing and premium gel adhesive, Latex-free and non-irritating to your skin.
  • EXCELLENT CONDUCTIVITY: Premium carbon electrode pads provides superior high conductivity, effective to relief muscle sore and pain.
  • REUSABLE TENS PADS REPLACEMENT: Our tens unit electrodes pads are designed for multiple uses when applied and removed with care. 100% satisfaction guarantee and life-time customer service.
Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

  • Welding rod holder Accepts rods up to 5/16''.
  • Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
  • Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
  • Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
  • high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

TOMAX 12-Inch 100 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor

  • Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals.
  • Construction grade carbide teeth provide maximum resistance for longer life.
  • Electrophoretic Coating reduces the rusting and corrosion.
  • TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items.
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX.
Check Stock

TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor

  • Ideal for cutting Plastic, Aluminum and Non-Ferrous Metals.
  • Construction grade carbide teeth provide maximum resistance for longer life.
  • Electrophoretic Coating reduces the rusting and corrosion.
  • TCG Grind for a durable and smooth cut on non-ferrous metals, aluminum, and plastic items.
  • Quality Guarantee, Limited Lifetime Warranty by TOMAX.
Check Stock

Rockwell RW8967.3 Sonicrafter Oscillating Multitool Extended Life Bimetal Wood & Nail End Cut Blade 3-Pack 1-3/8

  • Use to make plunge cuts up to 1-5/8-inch deep.
  • Cut wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
  • Blade dimensions: 3.5 L x 1.35 W x .5 H inches.
Check Stock