ReviewsNon ferrous Materials

Red Label Abrasives 1 1/2 inch X 50 YD Sanding Shop Roll, 150 Grit

Premium aluminum oxide semi-closed coat product for general purpose use.
This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
Recommended for dry sanding only | Can Be used on damp materials.

Check Stock

BOSCH T118G 5-Piece 3-5/8 In 36 TPI Basic for Metal T-Shank Jig Saw Blades

For sheet metal 17-26 gauge, very thin metals 1/64 In. to 3/64 In. thick (ferrous and non-ferrous).
36 TPI tooth design for smooth cuts in very thin materials.
High-speed steel construction for maximum life in straight cuts.
3-5/8 In. overall length, 2-5/8 In. working length.
Proper lubricant is recommended when cutting metal.

Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..

Check Stock

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.

Check Stock

WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polishing

This kit includes complete rotary tool accessories of cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleaning, meet your various DIY application requirements.
All purpose accessory for cutting, grinding, sanding, carving and polishing on variety of materials.
Suitable for most ferrous and non-ferrous metals, castings, welded joint. Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless.
Shank Diameter: 1/8-inch, universal fitment for use on all major brands.
Reusable storage case for easy storage and carrying.

Check Stock

25 x TopsTools T118A Metal Cutting Jigsaw Blades Compatible with Bosch Dewalt Makita Milwaukee and many more

25 piece TopsTools universal Jigsaw saw blade accessory kit.
TopsTools T118A Jigsaw blades are designed and engineered using the highest quality materials and processes.
T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models.
Ideal for sheet metal 10-16 gauge, thin metals 1/25 In. to 1/8 In. thick (ferrous and non-ferrous).

Check Stock

Benchmark Abrasives Cylindrical Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SA-5

Benchmark Abrasives SA-5 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
Double-cut or Crosscut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hardwood, and ceramic..
Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..

Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..

Check Stock

Tance Multifunction Mini Bench Saw Mini Table Saw for Cutting Wood Copper 4 Inch US Plug

2. Using high-efficiency cut to low-noise motor drive,.
Features: 1. Lightweight and easy to carry,.
3. With two kinds of material saw blade,.
4. Can be plastic, wood, glass, stone and other non-metallic materials and copper, aluminum and other non-ferrous metal materials for cutting.

Check Stock

TEMO SF-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 6 Inch Long Shank

These carbide burrs are designed to grind and shape aluminum and other non-ferrous metals. They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading..
Made with tungsten carbide and suitable for deburring and polishing..
Extra long 6" shank. Aluminum cut head and meet US standard with 1/4" (6.35mm) shank,1/2" (12.7mm) head diameter, 1" (25.4mm) cut length, and 7" total length. | SF-5L6 Round Nose Tree Head Shape.
Individually packaged with a protective plastic tube..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

Benchmark Abrasives Flame Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SH-5

Benchmark Abrasives SH-5 flame shape burrs are great for interior contour work and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..

Check Stock