ReviewsNon ferrous Metal Products

SHDIATOOL Metal Cutting Diamond Blades Set of 2 Pieces

  • 1PC Metal Cutting Diamond Disc plus 1PC All Purpose Metal Cutting Blade.
  • Metal Cutting Diamond Discs are specially designed for cutting steel tube, iron rebar (Less than dia 25mm), angle steel.
  • All Purpose Metal Cutting Blade has Wide Application - Granite, Marble, Aluminum, Steel, Wood....
  • No risk of break of disc,so much safer than abrasive cut-off wheel.
  • Blades are made with high hardness diamond, could be used for cutting all ferrous and non-ferrous metals, with a Lower Cost per Cut.
Check Stock

New Security Walk-Thru Metal Detector, Full Warranty , 6 Zone 6M

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • LED alarm light on column, displaying the area of metal detected accurately..
  • Six interlaced detection regions of the same high with the body and combining.
Check Stock

Benchmark Abrasives Cylindrical Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SA-5

  • Benchmark Abrasives SA-5 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Timber Wolf Bandsaw Blade 1/2\ x 93-1/2\

  • Designed for use in many standard stationary band saws..
  • Optimized tooth geometry for applications in ferrous and non-ferrous metals..
  • Bi-Metal blade construction for long life performance..
  • Precision sharpened teeth for clean, accurate cuts..
Check Stock

Benchmark Abrasives Flame Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SH-5

  • Benchmark Abrasives SH-5 flame shape burrs are great for interior contour work and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Walk-Thru Metal Detector, Full Warranty , 6 Zone 6M, Security for Schools,Office

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • LED alarm light on column, displaying the area of metal detected accurately..
  • Six interlaced detection regions of the same high with the body and combining.
Check Stock

BOSCH BS62-18MD 62 x 3/8 x 18T Metal Bandsaw Blade

  • Designed for use in many standard stationary band saws..
  • Optimized tooth geometry for applications in ferrous and non-ferrous metals..
  • Bi-Metal blade construction for long life performance..
  • Precision sharpened teeth for clean, accurate cuts..
Check Stock

Benchmark Abrasives Oval/Egg Shape Premium Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SE-5

  • Benchmark Abrasives SE-5 oval/egg shape burrs are great for contouring and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Inverted Cone Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SN-4

  • Benchmark Abrasives SN-4 inverted cone burrs are great for rear-side chamfering, edge milling, and machining on hard-to-reach areas. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Pointed Cone Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SM-3

  • Benchmark Abrasives SM-3 cone burrs are great for narrow contours, surface machining, and getting at rounded edge and surface processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Pointed Cone Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SM-5

  • Benchmark Abrasives SM-5 pointed cone burrs are great for narrow contours, surface machining, and getting at rounded edge and surface processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock