ReviewsNon ferrous Scrap Metals

Buried Treasure

  • MULTI-IQ TECHNOLOGY: Minelab’s revolutionary technology combines the power of multiple detectors into one, allowing you to effectively search all metals, all soils, all the time..
  • ACCURATE TARGET IDs: Identify your targets quickly and confidently to efficiently sort between trash and treasure with 119 Target IDs (20 ferrous, 99 non-ferrous)..
  • TARGET SEPARATION: Recovery Speed and Iron Bias help you discriminate between trash and treasure..
  • WATERPROOF: Go anywhere, even below the surface. The EQUINOX 900 is waterproof up to 16 ft (5 meters) with an IP68 rating..
  • ALL-TERRAIN: Outperform other detectors and dominate detection in any condition. Search all metals, all soils, all the time – including gold. With the Gold mode, no nugget will escape you..
Check Stock

Rockwell RW8930.3 1-1/8-Inch Sonicrafter Oscillating Multitool Bi-metal and Wood End Cut Saw Blade with Universal Fit System, 3-Pack

  • Use to make plunge cuts up to 1-5/8-Inch deep.
  • Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers.
  • Hardened teeth will cut non-ferrous metals.
  • Universal fit system adapts to other brands.
Check Stock

Annular Cutters 8pcs/Set,2''Cutting Depth,3/4''Weldon Shank,(9/16,11/16,13/16,15/16,1,1-1/16)inch Cutting Diameter Annular Cutters,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

  • Annular Cutter Kit includes 6 pcs high speed steel annular cutters,2"Cutting Depth,Cutting Diameter(9/16", 11/16'', 13/16'', 15/16'', 1“,1-1/16) and 2pcs pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

Benchmark Abrasives 4.5\ Super Thin Turbo Diamond Blade Angle Grinder Blades for Cutting Wood, Alloy Steel, Glass, Ceramic, Plastic, Iron, Marble, Stone, Metals, Tiles, PVC

  • HIGH-QUALITY, SUPERABRASIVE DIAMONDS - Made with the latest diamond vacuum-brazing process for the strongest bond possible to the steel core. Excellent for cutting through pre-stressed concrete, ferrous and non-ferrous metals, pipe, metal plate, steel bar, angle iron, ductile iron, rebar, steel rod, iron bars, ductile pipe, cast iron, copper, brass, stainless steel, aluminum, scrap metal, HDPE and PVC plastic pipe..
  • LASTS 100X+ LONGER - Compared to traditional abrasive cut off wheels and will cut with a constant, even cutting depth that doesnt wear down as you cut. Abrasive discs wear down and will shrink which can be dangerous. This diamond blade maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. Save time by using one blade without having to constantly put on a new disc..
  • SIDE COATING - Prevents stress build up and allows the side of the blade to be used for grinding. Trusted by firefighters and swat teams worldwide, this diamond blade is used as an emergency rescue and tactical entry tool..
  • SPECIFICATIONS - 12" diameter X .125 thick with a 1" Arbor with 20MM Bushing. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY - This product has a 100% lifetime warranty with free return....
Check Stock

TWIN-TOWN 12-Inch 96 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor

  • Real industry quality level with elegant and simple design, ideal for cutting applications for Plastic, Aluminum and Non Ferrous Metals by using a table saw or miter saw.
  • C4 construction grade tungsten carbide teeth provide maximum resistance for 2X longer life.
  • TCG Grind for durable and smooth cut on non-ferrous metals, aluminum and plastic items.
  • 12 inch 96T fine finish cut-off blade with a laser-cut 1 inch arbor.
  • Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp.
Check Stock

PrimoChill Liquid Utopia - 15ml Bottle

  • Offers full line protection against algae and corrosion. Protects ferrous and non-ferrous metals from corrosion..
  • Can be used in new install(recommended) or existing loops..
  • Bottle Size: 15ml. Dosage: Mix with 1 Gallon of DI or distilled water.
Check Stock

70PCS U Shank Jigsaw Blades Set for Wood Plastic Metal Cutting, Assorted U-Shank Jig Saw Blade Set Universal Replace 90% Jig Saws Such as Bosch DEWALT SKIL Black and Decker 6T 8T 10T 14T 18T 24T 32T

  • 【70PCS Super Set】70pcs U shank jig saw blades set includes: Metal cutting: 10pcs x 14TPI medium cut.
  • Non ferrous metals: 10pcs x 18TPI medium cut.
  • Non ferrous metals: 10pcs x 24TPI fine cut.
  • Non ferrous metals: 10pcs x 32TPI extra fine cut.
  • Wood and plastic cutting: 10pcs x 6TPI fast cut.
  • 【U Shank】More Power. Three contact points are designed on the U-Shank of the saw blade for maximum grip and stability. Make woodworking faster and safer.
  • 【Compatibility】Compatible with over 90% current jigsaws including Bosch , DEWALT , BLACK+DECKER , CRAFTSMAN , SKIL , and Milwaukee U Shank jig saws, the u-shank jigsaw blades metal cutting are a versatile addition to any toolset.
  • 【High Quality】Made of high carbon steel material. HCS blades are suitable for cutting wood, plastic and metal. 70 Piece contractor jigsaw blades set. Meet your everyday needs.
  • 【Wide Application】Blades for Clean and precise straight/curved cutting, idea for hardwood, softwood, laminated boards, fiber boards, and plastic. This jig sawsjig saw blades set is designed to provide fast accurate cuts. Aggressive tooth pitch provides the super-fast cuts.
Check Stock

FOXBC Fine Wood 4-inch Pin End Scroll Saw Blade Replacement for Dremel Moto-Saw MS52 - 12 Pack,18 TPI

  • Easy installation and easy handling, easy to use and highly durable.
  • 4-Inch Pin End Scroll Saw Blade Replacement For Dremel Moto-Saw MS20 MS20-01 MS51-01 MS52-01 MS53-01.
  • These blades are designed for cutting wood, plastic and thin non-ferrous metals (copper, zinc, brass, lead and aluminum).
  • FOXBC brand of scroll blades are designed for the professional Craftsman who needs sharp, long lasting blades. These blades are precision sharpened for easy cutting of fine, intricate shapes. Offered in a variety of TPI and widths, these blades are recommended for cutting most woods, plastics and non ferrous metals..
Check Stock

Annular Cutters Set 13pcs,2'Cutting Depth,3/4''Weldon Shank,(7/16,1/2,9/16,11/16,5/8,3/4,13/16,7/8,15/16,1,1-1/16)inch Cutting Diameter Annular Cutter,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2pcs Pilot Pins

  • Annular Cutter Kit 2" cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

Kool Mist 100N-205 1 Gallon Single Mist Unit w/Stainless Steel Tank

  • Use for tapping, threading, drilling and reaming.
  • Use on ferrous metals and non-ferrous alloys.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Timber Wolf Bandsaw Blade 1/2\ x 93-1/2\

  • Designed for use in many standard stationary band saws..
  • Optimized tooth geometry for applications in ferrous and non-ferrous metals..
  • Bi-Metal blade construction for long life performance..
  • Precision sharpened teeth for clean, accurate cuts..
Check Stock