ReviewsNon metal Cutting Machine

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....

Check Stock

SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm

Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work..
Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through..
High Quality Full-Metal Structure：SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness..
Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object..
Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..

Check Stock

MASTEC 10-Inch 100T Carbide Tooth TCG for Aluminum Saw Blade with 5/8-Inch Arbor

【Specification】:10-inch 100 Carbide Teeth 5/8-inch arbor.
【Application】:Durable smooth cutting and clean cutting..
【TCG Tooth】:Triple Chip Teeth blade ideal for cutting Aluminum,Plexiglass,Plastic,Non-ferrous Metals..
【Machine use】:Widely used in Miter Saw,Circular Saw,Table Saw..
【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..

Check Stock

STARRETT 13582 9\ 7-1/2\X3/4X.032REG10/S Flex Back BANDSAW Blade

Excellent fatigue factor to ensure long life on machines running at a high SFM, cutting non-ferrous metal and wood. (Not recommended above 10,000 SFM.).
Used to cut materials of low alloy that are not extremely difficult to machine..

Check Stock

Mophorn TIG/MMA Plasma Cutter CUT520 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A Plasma Cutter 50A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component....
Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 6 mm.
Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD....
Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated....
Compact and Portable: Lightweight 37 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....

Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....

Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..

Check Stock

Mophorn TIG/MMA Plasma Cutter CT312P 3 in 1 Combo Welding Machine Tig Welder 120A Arc Welder 120A Plasma Cutter 30A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component....
Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 4 mm.
Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD....
Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated....
Compact and Portable: Lightweight 32 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....

Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

Double Protection Desktop: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine..
Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming..
Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to ....

Check Stock

STARRETT 10015 1/4X.025X100\ 18W REG Flex-Back Band Saw Blade

Made from carbon steel with a flexible back..
Excellent fatigue factor to ensure long life on machines running at a high SFM, cutting non-ferrous metal and wood. (Not recommended above 10,000 SFM.).
Used to cut materials of low alloy that are not extremely difficult to machine..

Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....

Check Stock