ReviewsNon metallic Flexible Conduit

Klein Tools 80036 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Programmable Angles, Magnetic Base, 2-Piece

DIGITAL LEVEL MEASURES 0-90 Degree, 0-180 Degree, or dual axis bullseye ranges.
PRE-PROGRAMMED TARGET PITCHES: 1/8-Inch, 1/4-Inch, 3/8-Inch and 1/2-Inch per foot.
AUDIBLE ALARM sounds when target angle is achieved.
BULLSEYE ORIENTATION accurately determines X- and Y-axis.
DISPLAY AUTO-ROTATES when used in horizontal or vertical orientation.
PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.

The product is manufactured in United States.
All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.

Plumber's Kit straps to brass, copper, PVC, and other non-magnetic pipes and conduits to present a magnetic surface to which Digital Angle Gauges and Levels may be mounted.
Two flexible, adjustable length straps connect the metal plate to pipes, conduit, or other objects.
Fits common PVC pipe sizes from 1- to 6-Inch outer diameter and can stretch to fit circumferences up to 18-Inch.
Attach magnetic side of Digital Angle Gauges and Levels to the metal plate to use the gauge in a hands-free fashion to easily set and measure angles.
Metal plate holds Digital Angle Gauges and Levels in place while the desired angle, pitch, or tilt is set or measured.

Suitable for use with liquid-tight flexible non-metallic conduit, Type B.
Madison Electric is now part of the Southwire family. Product packaging may vary..

Designed for use with type B liquid-tight conduit in corrosive, commercial and residential applications to seal a liquidtight, raintight, or oiltight....
Can be used on metallic or non-metallic conduit with a liquid-tight connection.
Meets NEC and UL requirements for use in wet locations.
UL (514B, 567 - USA) and CUL (C22.2 No. 18F - Canada) Listed and Certified.

Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
Shows the depth of metal from the surface in both inches and centimeters.
Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.

Made in USA. Use with Sealproof straight or right angle connectors.
can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
Sealproof Made in USA flexible PVC conduit resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
outdoor, sunlight resistant, direct burial..
Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
UL Listed Underwriter's Laboratories File No. E-129973.
UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.

THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.

SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..