ReviewsNoncombustible Threads

H&G lifestyles Roof Snow De-Icing Heating cable Self-Regulating-Plug-in Ready Heat Cable 140 feet 8 Watts Per Foot

  • ★H&G lifestyles heat tape（120 volt, 8 watts/ft. self-regulating 158 °F=70℃） Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • ★Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles. Suitable for all roof and gutter configurations..
  • ★Heated wire for roof is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables.
  • no maintenance required, Self-Regulating roof snow melt cable WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables..
  • ★Tough Modified Polyolefin as inner insulation and weather resistant TPE (high-low temperature) as out jacket. 100% screen rate and tinned copper core. More safe and more healthy.
  • Self-regulating temperature design is energy-saving and safer, If you are not completely satisfied with H&G lifestyles heating cable, please don't hesitate to contact us.
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • ...ct your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs..
  • Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are....
Check Stock

LNKA 4 Pack of 3000 Yard Spools Black Sewing Thread All Purpose 100% Spun Polyester Overlock Cone (Upholstery, Canvas, Drapery, Beading, Quilting)

  • Sewing Spool Threads Polyester Threads 4 Cones (3000 yards each) Spool of Threads for Sewing Machine and Hand.
  • 100% Polyester Spu Sewing Spool Threads Polyester Threads Spool of Thread.
  • Each Cone is 3000 yards. You will receive total of 12000 yards black Sewing Threads.
  • Polyester Threads for home or commercial machines with single needle or hand sewing.
  • Compatible with most sergers, overlocks, and sewing machines.
  • Great Quality High Tensile Strength, Low Lint Thread. Will not Break at High Speed Machines..
Check Stock

KECHUANG 60-Pieces Tap and Die Set Metric and SAE Standard Internal and External Threaded Tool Set

  • ► PREMIUM MATERIAL- Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ► EXCELLENT CUTTING PERFORMANCE-All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance, Can cut materials such as cast iron, steel, aluminum, copper, Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • ► VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ► EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • ► WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Check Stock

Radiant Solutions Company Heat Cable for Pipe Freeze Protection, 24 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

  • ★H&G lifestyles heat tape（120 volt, 8 watts/ft. self-regulating 158 °F=70℃） Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • ★Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles. Suitable for all roof and gutter configurations..
  • ★Heated wire for roof is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables.
  • no maintenance required, Self-Regulating roof snow melt cable WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables..
  • ★Tough Modified Polyolefin as inner insulation and weather resistant TPE (high-low temperature) as out jacket. 100% screen rate and tinned copper core. More safe and more healthy.
  • Self-regulating temperature design is energy-saving and safer, If you are not completely satisfied with H&G lifestyles heating cable, please don't hesitate to contact us.
Check Stock

Hitena STWRAP Rod Wrapping Thread - Metallic Noble 10 Color 100yd Pack

  • 10 color assortment of Metallic Noble threads. Size A and B available in 100yd spools.
  • 1303 Silver / 1304 Yellow / 1305 Lemon / 1306 Orange / 1309 Pink / 1311 Red / 1313 Green / 1315 Tan / 1316 Blue / 1318 Violet.
  • Most bright and vibrant threads colors that cannot be done with any other threads. Absolutely gorgeous when wrapped on bamboo rods.
  • All Noble threads come with Lifetime UV Color Fastness Guarantee.
  • While keeping its vivid look of metallic threads, Noble thread turns translucent and takes up blank color when finish is applied (Use of Color....
Check Stock

Alma Gourmet Spanish Saffron Tin 2 Gram

  • QUALITY: BinZ Saffron Threads are Hand Picked, Organically Grown and Directly Sourced from local Farmers..
  • FLAVOR: BinZ's All Red Saffron Threads has the best Aroma, Taste & Color. Our Pure and Fresh Saffron is Packed in Air-tight.
  • HOW TO USE (in FOOD): Soak Threads in warm water for 15 minutes and add to any hot or cold recipe including Paella, Risotto, Rice, Dessert.
  • HOW TO USE (in TEAs): Add a Few Saffron Threads to any Hot or Cold drink and mix it well.for Golden Milk mix Saffron Threads in warm milk.
  • OUR GUARANTEE: 100% Satisfaction Guaranteed. Incase of any issues, please contact us and we will refund or replace your order as requested. No questions asked!.
Check Stock

Klein Tools 626 Tapping Tool, 6-in-1, Cushion Grip

  • Forms new threads, re-forms burred or damaged threads, and cleans out obstructions.
  • Automatically re-threads to the next larger size if threads are stripped.
  • Cushion-Grip handle for greater torque and comfort.
  • Accommodates six tap sizes: 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20.
Check Stock

Rotary Breather Tube Set Fits B&S 692187 & 692189

  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
  • ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

New brothread 28pcs Assorted Colors 60S/2 (90WT) Prewound Bobbin Thread Plastic Size A SA156 for Embroidery and Sewing Machines DIY Embroidery Thread Sewing Thread

  • ➤➤ Clear Plastic Case+28pcs Prewound Bobbin Threads: The foam pad with holes can hold bobbins snugly and prevent the bobbin threads from unraveling. The superb transparency of the box allows you to see the thread colors clearly. Hanging the storage box on the wall with hook is available..
  • ➤ Most Soft Spun Polyester 60S/2 (90WT) prewound bobbin threads, this bobbin thread can be worn close to your skin, make you feel very soft and comfortable..
  • ➤ 28 Assorted Colors prewound bobbin threads meet your basic requirements for DIY embroidery and sewing..
  • ➤ Size A Class 15 (SA156) prewound bobbin threads fit most commercial and home embroidery and sewing machines, like Brother, Babylock, Janome, Kenmore, Juki, Elna, Quantum Futura, Singer..
  • ➤ Plastic Sided prewound bobbin threads have clear plastic sides that will not distort or absorb machine oils..
Check Stock

Powerbuilt 12mm Back Tap Spark Plug Thread Repair Tool, Straightening Tool, Motorcycle Spark Plugs, Repairs Damaged Threads - 641148

  • Back-taper 12 millimeter thread straightening tool for motorcycle spark plug fouled threads.
  • Collapsible design allows it to engage be placed through the spark plug hole and into the CHAMBER.
  • Expands the tool's threaded area and threading into the clean threads.
  • Back-Tap 12 millimeter thread straightening tool for motorcycle spark plug fouled threads.
  • Collapsible design allows it to engage be placed through the spark plug hole and into the chamber.
  • Backtap repairs the damaged threads as it is drawn up through the spark plug hole.
Check Stock